Initial Settings
1
Set the language, time, and date after purchasing the camera before you start taking pictures.
Power switch
Four-way controller
4 button
3 button
34
In this manual, the arrow keys to be pressed are expressed as indicated on the right.
The Language/ screen appears when the camera is turned on for the first time.
Perform the operations in “Setting the Display Language” below to set the
language, and in “Setting the Date and Time” (p.37) to set the current date and time.
Go to “Setting the Date and Time” (p.37) when the Date Adjust screen appears.
Language, Date, and Time can be changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display
Language” (p.155).
• To change the date and time, follow the steps in “Changing the Date and Time” (p.151).
Setting the Display Language
1
Use the four-way controller
( 2345 ) to choose the display language.
E n g l i s h
Deutsch
D a n s k
Svenska
F i n n i s h
I t a l i a n o
Nederlands
MENU C a n c e l
P o l i s h
C z e c h
Hungarian
OK O K
2
Press the 4 button.
The Initial Setting screen appears in the selected language. If the desired settings for [Hometown] and daylight saving time appear, press the 4 button again to display the [Date Adjust] screen. Go to
“Setting the Date and Time” (p.37, p.38).
Go to Step 3 in "Setting Hometown and
DST" if the desired settings do not appear.
I n i t i a l S e t t i n g
H o m e t o w n
N e w Yo r k
MENU C a n c e l
E n g l i s h
DST
OK O K
DST
If you accidentally select another language and go to the next procedure, perform the following operation to set the language back.
When Another Language Has Been Inadvertently Selected
1
Press the four-way controller ( 5 ).
2
Use the four-way controller ( 2345 ) to select the language and press the 4 button.
When the Screen After Step 2 Appears in Another Language
1
Press the 4 button.
2
Press the 3 button.
3
Press the four-way controller ( 5 ).
4
Use the four-way controller ( 32 ) to select
[Language/ ].
5
Press the four-way controller ( 5 ).
The Language/ screen appears.
6
Use the four-way controller ( 2345 ) to select the language.
7
Press the 4 button.
The [ u Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset Hometown and the Date and Time, refer to the pages below for instructions.
• To change Hometown, follow the steps in “Setting the World Time” (p.153).
• To change the Date and Time, follow the steps in “Changing the Date and
Time” (p.151).
1
35
1
Setting Hometown and DST
3
Press the four-way controller ( 3 ).
I n i t i a l S e t t i n g
The frame moves to [Hometown].
4
Press the four-way controller ( 5 ).
The Hometown screen appears.
5
Use the four-way controller ( 45 ) to choose the city.
6
Press the four-way controller ( 3 ).
H o m e t o w n
N e w Yo r k
MENU C a n c e l
E n g l i s h
The frame moves to [DST] (Daylight Saving Time).
7
Use the four-way controller ( 45 ) to select P (Off).
8
Press the 4 button.
DST
OK O K
DST
The Initial Setting screen appears.
9
Press the 4 button.
The [Date Adjust] screen appears. Next, set the date and time.
36
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller ( 5 ).
The frame moves to [mm/dd/yy].
2
Use the four-way controller ( 23 ) to choose the date and time display style.
D a t e A d j u s t
D a t e S t y l e
D a t e
Ti m e
MENU C a n c e l
3
Press the four-way controller ( 5 ).
The frame moves to [24h].
4
Use the four-way controller ( 23 ) to select [24h] (24-hour display) or
[12h] (12-hour display).
5
Press the four-way controller ( 5 ).
The frame returns to [Date Style].
6
Press the four-way controller ( 3 ).
The frame moves to [Date].
D a t e A d j u s t
D a t e S t y l e
D a t e
Ti m e
MENU C a n c e l
D a t e A d j u s t
D a t e S t y l e
D a t e
Ti m e mm dd yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK O K mm dd yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK O K mm dd yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
MENU C a n c e l OK O K
7
Press the four-way controller ( 5 ).
D a t e A d j u s t
The frame moves to the month.
8
Use the four-way controller ( 23 ) to change the month.
D a t e S t y l e
D a t e
Change the day and year in the same manner.
Next, change the time.
Ti m e
MENU C a n c e l
If you selected [12h] in Step 4, the setting switches between am and pm corresponding to the time.
mm dd yy 24h
0 1 / 0 1 / 2007
0 : 0 0
OK O K
1
37
1
9
Press the 4 button.
The camera returns to capture status.
Language, Date, Time, Hometown, and DST can be changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display
Language” (p.155).
• To change the date and time, follow the steps in “Changing the Date and Time” (p.151).
• To change the city or turn DST on and off, follow the steps in “Setting the World Time” (p.153).
• When the 3 button is pressed in the Language/ screen, the selected language is canceled and the Date Adjustment screen is displayed in the default language (English). To set to
another language, follow the steps on p.35.
• When the 3 button is pressed in the Date Adjustment screen, the camera enters Shooting mode without setting the date. Restart the camera to set the date. The Date Adjust screen reappears. Alternatively, you can display the Date Adjustment screen from the [ u
Setting] menu. (p.151)
If you press the 4 button in Step 9, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.
The video output format (NTSC/PAL) is automatically set according to the City set for [Hometown] in initial settings. Refer to the pages below for the video output settings and instructions on how to change the video output setting after initial settings.
• To see the video output format set in initial settings, refer to “List of World
Time Cities” (p.165).
• To change the video output format after initial settings, refer to “Changing the
Video Output Format” (p.158).
38
