Using Multistatements. Casio FX-9750G

Special Functions

2 - 2

Make necessary changes.

d ![ b

Execute it again.

w k

Using Multistatements

Multistatements are formed by connecting a number of individual statements for sequential execution. You can use multistatements in manual calculations and in programmed calculations. There are two different ways that you can use to connect statements to form multistatements.

• Colon (:)

Statements that are connected with colons are executed from left to right, without stopping.

• Display Result Command ( ^ )

When execution reaches the end of a statement followed by a display result command, execution stops and the result up to that point appears on the display. You can resume execution by pressing the w key.

u To use multistatements

Example 6.9

×

123 = 848.7

123

÷

3.2 = 38.4375

A bcd a a A

!W6

( g ) 5 (:) g.j* a A !W5

( ^ ) a A/d.c

w w

Intermediate result at point where “ ^ ” is used.

• Note that the final result of a multistatement is always displayed, regardless of whether it ends with a display result command.

• You cannot construct a multistatement in which one statement directly uses the result of the previous statement.

Example 123 × 456: × 5

Invalid

51