GB
Programming
Programming
OPERATING MODE (Overview of the menu)
OPERATING MODE
M
TIME/DATE +/PROGRAM +/SETTING +/FUNCTION
PROG 1 +/PROG 2
1. Press the MENU button until TIME/DATE appears.
2. To select further menus, press the +/buttons.
3. Press the MENU button to switch to operating mode.
TIME/DATE (to set the time and date)
TIME/DATE
OK
TIME
+/-
OK
YEAR
+/-
OK
MONTH
+/-
OK
DAY
+/-
TIME/DATE
OK
1. Press the MENU button until TIME/DATE appears.
2. By pressing OK, you get to the time menu level.
3. Now set the current time using the +/buttons.
4. If the time is set correctly, confirm by pressing OK.
5. Repeat the above procedure for the settings YEAR, MONTH and DAY.
6. Press the MENU button to switch to operating mode.
61
GB
Programming
PROG 1/ASTRO WEEK
(Astro function for week + blocking time ▲▼ )
PROG 1/ASTRO BLOCK
(Astro function for block 1/2 + blocking time ▲▼ )
PROG 1/ASTRO INDIVIDUAL
(Astro function for individual + blocking time ▲▼ )
PROG 1
OK
ASTRO
+/-
OK
WEEK/
BLOCK/
INDIVIDUAL
+/-
OK
BLOCKING TIME
+/-
OK
BLOCKING TIME
+/-
PROGRAM
OK
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until
PROGAMME appears.
3. Confirm by pressing OK. PROG 1 appears.
4. Confirm by pressing OK.
5. Press the + button until the ASTRO menu appears.
6. Confirm by pressing OK.
7. Now select the PROG 1 ASTRO function you require using the
+/buttons:
ASTRO WEEK
Press OK for the WEEK menu level (1–7). All further entries now refer to every day of the week.
ASTRO BLOCK
Press OK for the BLOCK menu level (BLOCK 1 1–5,
BLOCK 2 6, 7). All further entries now refer to BLOCK 1 (1–5) and BLOCK 2 (6, 7).
ASTRO INDIVIDUAL
Press OK for the INDIVIDUAL menu level (1, 2, 3, 4, 5, 6, 7).
All further entries now refer to each individual day of the week.
62
GB
Programming
8. Now set the BLOCKING TIME
▲ and BLOCKING TIME
▼ using the +/buttons. Confirm each entry by pressing OK.
9. Press the MENU button to switch to operating mode.
63
GB
Programming
PROG 1/ASTRO EVENING WEEK
(Astro function evening for week + switching time ▲ + blocking time ▼ )
PROG 1/ASTRO EVENING BLOCK
(Astro function evening for block 1/2 + switching time ▲ + blocking time
▼
)
PROG 1/ASTRO EVENING INDIVIDUAL
(Astro function evening for individual + switching time
▲
+ blocking time ▼ )
PROG 1
OK
ASTRO
EVENING
+/-
OK
WEEK/
BLOCK/
INDIVIDUAL
+/-
OK
SWITCHING TIME
+/-
OK
BLOCKING TIME
+/-
PROGRAM
OK
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until
PROGAMME appears.
3. Confirm by pressing OK. PROG 1 appears.
4. Confirm by pressing OK.
5. Press the + button until the ASTRO EVENING menu appears.
6. Confirm by pressing OK.
7. Now select the PROG 1 ASTRO EVENING function you require using +/buttons:
ASTRO EVENING WEEK
Press OK for the WEEK menu level (1–7). All further entries now refer to every day of the week.
ASTRO EVENING BLOCK
Press OK for the BLOCK menu level (BLOCK 1 1–5,
BLOCK 2 6, 7). All further entries now refer to BLOCK 1 (1–5) and BLOCK 2 (6, 7).
ASTRO EVENING INDIVIDUAL
Press OK for the INDIVIDUAL menu level (1, 2, 3, 4, 5, 6, 7).
All further entries now refer to each individual day of the week.
64
GB
Programming
8. Now set the SWITCHING TIME
▲ using the +/buttons.
Confirm your entry by pressing OK.
9. Now set the BLOCKING TIME
▼ using the +/buttons. Confirm your entry by pressing OK.
10. Press the MENU button to switch to operating mode.
65
GB
Programming
PROG 1/INDIVIDUAL WEEK
(Individual switching time ▲▼ for week)
PROG 1/INDIVIDUAL BLOCK
(Individual switching time ▲▼ for block 1/2)
PROG 1/INDIVIDUAL INDIVIDUAL
(Individual switching time ▲▼ for individual day)
PROG 1
OK
INDIVIDUAL
+/-
OK
WEEK/
BLOCK/
INDIVIDUAL
+/-
OK
SWITCHING TIME
+/-
OK
SWITCHING TIME
+/-
OK
PROGRAM
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until
PROGAMME appears.
3. Confirm by pressing OK. PROG 1 will appear.
4. Confirm by pressing OK.
5. Press the + button until INDIVIDUAL appears.
6. Confirm by pressing OK.
7. Now select the PROG 1 INDIVIDUAL function you require using the +/buttons:
INDIVIDUAL WEEK
Press OK for the WEEK menu level (1–7). All further entries now refer to every day of the week.
INDIVIDUAL BLOCK
Press OK for the BLOCK menu level (BLOCK 1 1–5,
BLOCK 2 6, 7). All further entries now refer to BLOCK 1 (1–5) and BLOCK 2 (6, 7).
INDIVIDUAL INDIVIDUAL
Press OK for the INDIVIDUAL menu level (1, 2, 3, 4, 5, 6, 7).
All further entries now refer to every individual day of the week.
8. Now set the SWITCHING TIME
▲ and the SWITCHING TIME
▼ using the +/buttons. Confirm your entry by pressing OK.
9. Press the MENU button to switch to operating mode.
66
GB
Programming
PROG 2/INDIVIDUAL WEEK
(Individual switching time ▲▼ for week)
PROG 2/INDIVIDUAL BLOCK
(Individual switching time ▲▼ for block 1/2)
PROG 2/INDIVIDUAL INDIVIDUAL
(Individual switching time
▲▼ for individual day)
PROG 2
OK
INDIVIDUAL
+/-
OK
WEEK/
BLOCK/
INDIVIDUAL
+/-
OK
SWITCHING TIME
+/-
OK
SWITCHING TIME
+/-
OK
PROGRAM
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until
PROGAMME appears.
3. Confirm by pressing OK.
4. Press the + button until PROG 2 appears.
5. Confirm by pressing OK.
6. Press the + button until INDIVIDUAL appears.
7. Confirm by pressing OK.
8. Now select the PROG 2 INDIVIDUAL function you require using the +/buttons:
INDIVIDUAL WEEK
Press OK for the WEEK menu level (1–7). All further entries now refer to every day of the week.
INDIVIDUAL BLOCK
Press OK for the BLOCK menu level (BLOCK 1 1–5,
BLOCK 2 6, 7). All further entries now refer to BLOCK 1 (1–5) and BLOCK 2 (6, 7).
INDIVIDUAL INDIVIDUAL
Press OK for the INDIVIDUAL menu level (1, 2, 3, 4, 5, 6, 7).
All further entries now refer to every individual day of the week.
9. Now set the SWITCHING TIME ▲ and the SWITCHING TIME ▼ using the +/buttons. Confirm your entry by pressing OK.
10. Press the MENU button to switch to operating mode.
67
GB
Programming
PROG 2/OFFSET (e. g. time shutters are lowered to ventilation position in the evening)
PROG 2
OK
OFFSET
OK OK
OFFSET min
+/-
PROGRAM
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until PRO-
GAMME appears.
3. Confirm by pressing OK.
4. Press the + button until PROG 2 appears.
5. Confirm by pressing OK.
6. Press the + button until the OFFSET menu appears.
7. Confirm by pressing OK.
8. You can set the time for the DOWN control command to be triggered separately using the +/button (max. +/- 240 mins, depending on PROG 1 SWITCHING TIME
▼
).
Confirm your entry by pressing OK.
9. Press the MENU button to switch to operating mode.
Note: Using the SETTING menu level, you must enter the switching time of the intermediate position and select PROG 2 VENTILATION for the position of the end limits
68
GB
Programming
SETTING
HOLIDAY, LIGHT SENSOR (Holiday OFF/ON, sun/twilight setting)
SETTING
OK
HOLIDAY
OFF/ON
+/-
OK
LIGHT SENSOR
CONNECTED?
+/-
+/-
YES
SUN
OK
TWILIGHT
OK
NO continuing next page
1. Press the MENU button.
2. To select the SETTING menu, press the + button until SETTING appears.
3. Confirm by pressing OK.
4.
HOLIDAY OFF/ON will appear.
5. You can set the holiday function to ON or OFF by pressing the
+/button.
6. Confirm your selection by pressing OK.
Note: This dialog window will only be displayed if a light sensor is connected to the device.
7. You have confirmed the holiday function. SUN will appear.
8. The value set is displayed.
9. You can reset the sunlight setting by pressing the +/button.
(The two digits at the left of the display show the current light value.)
10. Confirm your entry by pressing OK.
To set the TWILIGHT SETTING, follow the same procedure as for SUN.
11. The function SUN/TWILIGHT SETTING has now been set.
Please read on for further programming options using the
SETTING menu .
69
GB
Programming
SETTING
INTERMEDIATE POSITION, VENTILATION/TILT, PROG 1 END
LIMIT (Time/position programming)
OK OK OK
Continuation
INTERMEDIATE
POSITION
+/-
VENTILATION
(TILT)
+/-
PROG 1
END POSITION continuing next page
+/-
PROG 1
INTERMEDIATE
POSITION
OK
+/-
PROG 1
VENTILATION
(TILT)
OK
1. You have confirmed the HOLIDAY/LIGHT SENSOR menu levels.
INTERMEDIATE POSITION will appear.
2. You can set the switching time to move to the INTERMEDIATE
POSITION using the +/button. The switching time is indicated in a few seconds or you can move to the INTERMEDIATE
POSITION from the upper end limit using the DOWN/UP button.
3. Confirm by pressing OK.
4. You can set the switching time to move to VENTILATION/TILT using the +/button. The switching time is indicated in a few seconds or you can move to the VENTILATION/TILT from the lower end limit using the UP/DOWN button.
Confirm by pressing OK.
5. You have confirmed the VENTILATION/TILT menu level.
PROG 1 END LIMIT/PROG 1 INTERMEDIATE POSITION or
PROG 1 VENTILATION/TILT will appear.
6. You can select PROG 1 END LIMIT, PROG 1 INTERMEDIATE
POSITION and PROG 1 VENTILATION/TILT using the
+/button.
7. Confirm your selection by pressing OK.
8. The function PROG 1 END LIMIT has now been set.
Please read on for further programming options using the
SETTING menu.
70
GB
Programming
SETTING
PROG 2 END LIMIT (Time/position programming)
OK
Continuation
PROG 2
END POSITION continuing next page
+/-
PROG 2
INTERMEDIATE
POSITION
OK
+/-
PROG 2
VENTILATION
(TILT)
OK
Note: This dialog window will only be displayed if a time is set in
PROG 2.
1. You have confirmed the PROG 1 END LIMIT menu level.
PROG 2 END LIMIT will appear.
2. You can select PROG 2 END LIMIT, PROG 2 INTERMEDIATE
POSITION and PROG 2 VENTILATION/TILT using the
+/button.
3. Confirm your selection by pressing OK.
4. The function PROG 2 POSITION has now been set.
Please read on for further programming options using the
SETTING menu.
71
GB
Programming
SETTING
GB ENGLISH/ASTRO SHIFT ▲▼
(Language, astro shift)
OK
Continuation
TEST MODE
ON/OFF
+/-
GB ENGLISH
+/continuing next page
OK
OK
ASTRO
SHIFT
+/-
ASTRO
SHIFT
+/-
OK
Note: The TEST MODE menu level will only be displayed if a light sensor is connected to the device.
1. You have confirmed the PROG 2 END LIMIT menu level. TEST
MODE ON/OFF will appear.
2. You can activate or deactivate the TEST MODE (ON/OFF) using the +/button.
Confirm by pressing OK. GB ENGLISH will appear.
Note: To exit from TEST MODE, press the OK button in operating mode.
3. You can set the language required using the +/button.
4. Confirm the language selected by pressing OK.
5.
ASTRO SHIFT
▲ will appear.
6. You can set the required astro shift ▲ (max. +/- 120 mins.) using the +/button.
7. Confirm by pressing OK.
8.
ASTRO SHIFT
▼ will appear.
9. You can set the required astro shift ▼ (max. +/- 120 mins.) using the +/button.
10. Confirm by pressing OK.
11. The function ASTRO SHIFT
▼ has now been set.
Please read on for further programming options using the
SETTING menu.
72
GB
Programming
SETTING
EXPERT MODE City (LONGITUDE, LATITUDE, TIME ZONE)
GB
Continuation
LONDON
+/-
OK
EXPERT
MODE
OFF continuing next page
+/-
+/-
+/-
ON
LONGITUDE
OK
LATITUDE
OK
TIME ZONE
OK
1. You have confirmed the function ASTRO SHIFT ▼ . The city selected (LONDON) will appear.
2. You can set the nearest town using the +/button.
3. Confirm by pressing OK.
Note: These dialog windows are only displayed when the EXPERT
MODE in the function menu is ON.
4.
LONGITUDE will appear. (If you prefer to define your location more precisely, you can do so by setting the degrees longitude and latitude.)
5. You can set the degrees longitude using the +/button.
6. Confirm by pressing OK. LATITUDE will appear.
7. You can set the degrees latitude using the +/button.
8. Confirm by pressing OK. TIME ZONE will appear.
9. You can set the TIME ZONE you are in using the +/button.
Confirm by pressing OK.
10. The TIME ZONE function has now been set.
Please read on for further programming options using the
SETTING menu.
73
GB
Programming
SETTING
SUMMER/WINTER
(Automatic clock adjustment for daylight saving changes)
OK
Continuation
SUMMER/WINTER
ON/OFF
+/-
SETTING
1. You have confirmed the TIME ZONE function.
SUMMER/
WINTER will appear.
2. You can switch SUMMER/WINTER on or off using the
+/button.
3. Confirm your selection by pressing OK.
4. Press the MENU button to switch to operating mode.
74
GB
Programming
FUNCTION
(only when the operating device is disconnected, only for qualified electricians)
ROLLER SHUTTER/VENETIAN BLIND, RUNNING TIME, INITIAL
OPERATION
(Selection of roller shutter/venetian blind, running time of the roller shutter/venetian blind, date of initial operation)
FUNCTION
OK
ROLLER SHUTTER/
VENETIAN BLIND
+/-
OK
RUNNING TIME
+/-
OK
EXPERT
MODE
OFF/ON
+/-
OK
INITIAL
OPERATION
OK
FUNCTION
1. Press the MENU button.
2. To select the FUNCTION menu, press the + button until
FUNCTION appears.
3. Confirm by pressing OK. ROLLER SHUTTER/VENETIAN
BLIND will appear.
4. You can select either roller shutter or venetian blind using the
+/button.
5. Confirm by pressing OK. RUNNING TIME will appear.
6. You can set the required running time using the +/button
(default setting: 120 seconds).
Confirm by pressing OK. EXPERT MODE OFF/ON will appear.
7. Confirm by pressing OK. EXPERT MODE OFF/ON will appear.
8. Confirm your selection by pressing OK. INITIAL OPERATION will appear.
9. Confirm by pressing OK.
10. Press the MENU button to switch to operating mode.
75
