advertisement
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
CAUTION!
This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device.
CAUTION! Magnetic field!
This symbol informs that the magnetic fields occurring during the device operation may cause interference.
NOTE!
This symbol highlights recommendations and information aimed for effective and trouble-free device operation.
1.2 Safety instructions
The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device.
Children should be observed to ensure that they are not playing with or starting the device.
Never leave the device unattended when in use.
Only use the device indoors.
The device is not remote control.
designed for use with an external timer or
- 25 -
The device must be operated in correct and safe technical condition only. In case of operational problems disconnect the device from the power supply and contact the service company.
Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard!
Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself.
Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires.
To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device that are not explicitly approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions below.
Never allow the power cable to come into contact with heat sources or sharp edges. The power cable should not hang over the side of the working surface. Ensure that no one can step on or trip over the cable.
The power cable must not be folded, bent or tangled, and must always remain fully unrolled. Never place the device or other objects on the power cable.
Do not cover the cable. Keep away the cable from operating range.
- 26 -
Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers.
The supply cable must be disconnected from the socket only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of electrical or mechanical modifications the electric shock hazard will occur.
Never immerse the appliance, the power cord and the power plug in water or other liquids.
Do not use any acid agents and make sure no water ingresses the device.
Never operate the device with moist hands or standing on wet floor.
Remove the plug from its socket:
-
-
when the device is not used, in case of anomalies during operation, before cleaning.
HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the instructions below.
During the operation the cooking surface becomes very hot.
Keep in mind , that the induction cooker itself does not produce any heat during cooking. However, the heat from the pan will leave the cooking surface hot! After use the surface is hot.
Do not touch!
- 27 -
Do not place any metal kitchen utensils, pot covers, frying pans, knives, or other metal objects on the cooking field. After the device activation they may become very hot.
Keep in mind that the objects like rings, watches, etc. may become hot in the vicinity of the cooking surface.
Do avoid overheating do not place the aliminium foil or metal plates on the surface of the device.
WARNING! Fire hazard!
To avoid the hazard results please follow the instructions below.
Avoid prolonged heating of oils and fats! The overheated oil or fat may quickly ignite. In case of ignition on the cooking field deactivate the device and cover the flame with large pot cover, plate, or moistened cloth.
Never use water for extinguishing!
After covering the flame wait for the cooking pots to cool down and assure appropriate amount of fresh air.
WARNING! Explosion hazard!
To avoid the hazard results please follow the instructions below.
Do not place any flammable plastic containers or acidic and basic materials near the device as it may limit its life and cause deflagration during the activation.
- 28 -
Do not heat closed containers, e.g. canned food, on the induction cooking field. The containers or cans may explode
(crack) due to overpressure. Open the can and place it in the pot with some water heated on the cooking field.
CAUTION! Electromagnetic field hazard!
To avoid the hazard results please follow the instructions below.
The magnetic objects, like credic cards, data storage devices, or calculators, must not be placed in the direct vicinity of the operating device. Their operation may be disturbed by the magnetic field.
Do not open the lower cover!
Make sure that the cooking pots are placed in the centre of the work field to cover the electromagnetic field in the best possible range.
The scientific research confirm that the induction cookers are not dangerous. But persons with the artificial pacemakers should keep the distance of min. 60 cm from the operating device.
CAUTION!
In order to avoid any damages of the device follow the instructions below.
Do not use any sharp objects or abrasive agents for cleaning the surfaces.
The device should not be used as a shelf or for storage of empty kitchenware.
- 29 -
advertisement
Related manuals
advertisement