Component Considerations. Konica Minolta Bizhub C654e, Bizhub C754e
ಜಾಹಿರಾತು
ಜಾಹಿರಾತು
AU-202H
AU-211P
AU-204H
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
Component Considerations
Automatic Duplex Unit
(Standard)
Support Paper Type Thin Paper (14 lb. to 15.5 lb.)
Plain Paper (16 lb. to 24 lb.)
Thick Paper 1 (24.25 lb. to 32 lb.)
Thick Paper 1+ (32.25 to 41.75 lb.)
Thick Paper 2 (42 lb. to 55.5 lb.)
Thick Paper 3 (55.75 lb. to 68 lb.)
Special Paper (15 lb. to 24 lb.)
Letterhead (15 lb. to 24 lb.)
12.25" x 18" to 5.5" x 8.5"; 4" x 6"; SRA3; 8" x 13"; postcards (4" x 6")
Supplied from main unit
Support Paper Size
Power Requirements
Standard Dual Scanner
(Single Pass Duplex Document Feeder)
Type
Support Paper Size
Support Paper Weight
Single Pass Duplex Document Feeder
1-Sided/2-Sided Originals/Mixed Originals: 11" x 17"
L
to 5.5" x 8.5"
P
Index Paper: 8.5" x 14"
L
, 8.5" x 11"
P
/
L
Single-Sided/Double-Sided: 9.25 lb. bond to 55.75 lb. bond
Mixed Original: 13.5 lb. bond to 34 lb. bond
1-Sided Thin Paper (9.25 lb. to 13.063 lb.)
1-Sided Plain Paper (13.25 lb. to 55.75 lb.)
2-Sided Plain Paper (13.25 lb. to 55.75 lb.)
Mixed Original Plain Paper (13 lb. to 34 lb.)
Paper Capacity
Paper Transfer Speed
(C754e/C654e)
Max. 150 sheets (21.25 Ib.)(Single-Sided/Double-Sided Originals);
Index Paper: Max. 70 sheets
90 image/min (one-sided @ 400 dpi) (B&W/Color)
180 image/min (two-sided @ 400 dpi) (B&W/CoIor)
Power Requirements Supplied from main unit.
Max. Power Consumption 81.5 W or less
Dimensions WxDxH
Weight
24.25" x 22.75" x 5.5"
Approximately 39.75 lb.
5
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H AU-204H
Component Considerations
continued
FK-511 Fax Kit
Memory Size 128 GB (Std) (128 GB of the 250GB HDD of the main engine is used for fax memory)
Number of Stored Pages 10,000 Pages (approx. 700 characters per page when 8.5" x 11" document is stored using fine resolution)
Number of Fax Lines 1 Fax Line (Standard); Add second FK-511 Fax Kit for dual line fax capabilities.
Communication
Compatible Lines
Scanning Line Density
ECM/Super G3
PSTN, PBX
Ultra Fine: 600 x 600 dpi
Super Fine: 16 dot/mm x 15.4 lines/mm, 400 x 400 dpi
Fine: 8 dot/mm x 7.7 lines/mm, 200 x 200 dpi
Normal: 8 dot/mm x 3.85 lines/mm, 100 x 100 dpi
Modem Speed 2.4 kbps-33.6 kbps
Compression MH/MR/MMR/JBIG
Scanning/(Sending)
Paper Size
Original Glass: Max. 11" x 17"
ADF: 11" x 39" (Standard, Fine, Super Fine)
11" x 17" (Ultra Fine, Manual TX)
Recording Paper Size
Transmission Speed
Scan Speed
Number of Abbr. Dial
11" x 17" to 5.5" x 8.5"
Less than 3 sec. (V.34, 33.6 Kbps, JBIG)
2 sec. (Letter/Fine Mode)
2000
Number of Program Dial
Number of Group Dial
Sequential Multiple
Station Transmission
Transmitting Functions
400
100 (Up to 500 destinations per group)
Max. 600
Receiving Functions
2-in-1 TX, Mixed Original, F-Code Transmission, Frame Erase
Transmission, Sharpness, Header/Footer, Memory Transmission,
Quick Memory Transmission, Timer Transmission, Incomplete
Transmission Hold, Manual Transmission, Confidential Transmission,
Password Transmission, Polling Transmission, Bulletin Function,
Relay Transmission, Fax Forwarding Function, Overseas TX, V.34
OFF, ECM OFF
Duplex Print (RX), Manual Reception, Confidential Reception, Memory
Reception, Polling Reception, Bulletin Function, Fax Forwarding (to any destination stored in the Address Book), TSI Routing (to any destination stored in the Address Book).
6
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H AU-204H
FK-508 Fax Kit
Memory Size 128 GB (Std) (128 GB of the 250GB HDD of the main engine is used for fax memory)
Number of Stored Pages 10,000 Pages (including all Scan/Box/Printer/Fax Documents)
Number of Fax Lines Add 1st FK-508 for 3rd Fax Line (Optional); Add 2nd FK-508 for
4th Fax Line (Optional); Must add two FK-511 Fax Kits first for single and dual line capabilities before you can add lines 3 and 4. FK-508 requires MK-728 Mount Kit (only one MK-728 Mount Kit required).
Communication
Compatible Lines
Scanning Line Density
ECM/Super G3
PSTN, PBX
Ultra Fine: 600 x 600 dpi
Super Fine: 16 dot/mm x 15.4 lines/mm, 400 x 400 dpi
Fine: 8 dot/mm x 7.7 lines/mm, 200 x 200 dpi
Normal: 8 dot mm x 3.85 lines, 100 x 100 dpi
Modem Speed 2.4kbps-33.6kbps
Compression MH/MR/MMR/JBIG
Scanning (Sending)
Paper Size
Original Glass: Max. 11" x 17"
ADF: 11" x 39" (Standard, Fine, Super Fine)
11" x 17" (Standard, Fine, Super Fine)
Recording Paper Size
Transmission Speed
Scan Speed
Number of Abbr. Dial
11" x 17"
Less than 3 sec (V.34, JBIG)
1 sec. (Letter/Fine Mode)
2,000
Number of Program Dial
Number of Group Dial
Sequential Multiple
Station Transmission
Transmitting Functions
Receiving Functions
400
100 (Up to 500 destinations per group)
Max. 600
605 (500 Abbreviated Dials + 100 Manual Dials + 5 Manual Email
Addresses)
Mixed Original, F-Code Transmission, Frame Erase Transmission,
Sharpness, Header/Footer, Memory Transmission, Quick Memory
Transmission, Timer Transmission, Incomplete Transmission
Hold, Manual Transmission, Confidential Transmission, Password
Transmission, Polling Transmission, Bulletin Transmission,
Fax Forwarding Function, Overseas TX, V.34 OFF, ECM OFF
Duplex Print (RX), Manual Reception, Confidential Reception,
Memory Reception, Polling RX, TSI Routing (to any destination stored in the Address Book), Fax Forwarding
7
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H
AU-211P
AU-204H
Component Considerations
continued
FS-535 Staple Finisher
(100 Sheets)
Type
Support Paper Type
Support Paper Size
Staple Finisher
Output Tray 1 and Output Tray 2:
First Tray: 200 sheets/Second Tray: 3000 sheets (14 lb. to 24 lb.)
1st Tray:
Thin Paper: 200 sheets (14 lb. to 15 lb.)
Plain Paper: 200 sheets (16 lb. to 24 lb.)
Recycled Paper: 200 sheets (16 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.) 20 sheets
OHP Transparency, Postcard, Envelope, Labels, Letterhead,
Tabs: 20 sheets
2nd Tray - Group/Sort Mode:
3,000 sheets (8.5" x 11" or less); 1,500 sheets (8.5" x 14: or more); 500 sheets (5.5" x 8.5" or more)
Thin Paper: 3000 sheets (14 lb. to 15 lb., 8.5" x 11"or less)
Plain Paper: 3000 sheets (16 lb. to 24 lb., 8.5" x 11"or less)
Recycled Paper: 3000 sheets (15 lb. to 24 lb., 8.5" x 11"or less)
Thick Paper: 100 sheets (24.188 lb. to 79.75 lb.)
OHP Transparency, Postcard, Envelope, Labels, Letterhead,
Tabs: 20 sheets
2nd Tray - Offset Group/Offset Sort Mode:
3,000 sheets (8.5" x 11"); 1,500 sheets (8.5" x 14");
500 sheets (B5 or less)
Plain Paper (15 lb. to 24 lb.)
Recycled Paper (15 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.) 20 sheets
Staple:
Thin Paper (14 lb. to 15 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled Paper (15 lb. to 24 lb.)
8.5" x 11", A4 or less 2 to 9 sheets
10 to 20 sheets
200 Copies
50 Copies
21 to 30 sheets 30 Copies
31 to 40 sheets
41 to 50 sheets
51 to 60 sheets
25 Copies
20 Copies
15 Copies
61 to 100 sheets 10 copies
8.5" x 14", B4 or more 2 to 9 sheets 50 Copies
10 to 20 sheets
21 to 30 sheets
50 Copies
30 Copies
31 to 40 sheets
41 to 50 sheets
25 Copies
20 Copies
51 to 60 sheets 15 Copies
61 to 100 sheets 10 Copies
Output Tray 1:
12.25" x 18"
L
*1 , 11" x 17"
L
to 5.5" x 8.5", 4" x 6", SRA3
L
Width: 3.5" to 12.625"; Length: 5.5" to 47.25"
Output Tray 2:
12.25" x 18", 11" x 17"
L
to 7.25" to 10.5"
L
/
P
, SRA3
L
Width: 7.188" to 12"; Length: 5.875" to 18"
*1 12.25" x 18" is 304.8 x 457.2 mm that is one-size larger than A3
*2
There are six types of foolscaps: 8.5" x 13.5"
L
, 220 x 330 mm
L
, 8.5" x 13"
L
,
8.25" x 13"
L
, 8.125" x 13.25" and 8" x 13".
Any one of these sizes is selectable. For details, contact your service representative.
Staple Settings: 11" x 17"
L
to 7.25" to 10.5"
L
/
P
8
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H
AU-211P
AU-204H
Component Considerations
FS-535 Staple Finisher
continued
Mode Non-Sort/Sort/Group/Sort Staple/Group Staple/Sort Punch/Group
Punch/Sort Staple Punch/Booklet/Center Fold/Tri-Fold, Offset
Output, Staple Output and Punch Output supported via Tray 2 only. Booklet Output, Center Fold Output and Tri-Fold Output via optional SD-512 Booklet Tray only.
Stacking Capacity
Output Tray 1:
Plain Paper (21.25 lb.) 200 sheets (8.5" x 11"
L
/
P
, 7.25" x 10.5"
L
/
P
;
1,500 sheets (12" x 18"
1
, 8.5" x 14"
L
, 8" x 13"
2
L
) Index cards, wide paper and non-standard -size paper: 1,500 sheets
Thick Paper, Transparency, Postcard (4" x 6"), Envelope, Label Sheets,
Letterhead, Index paper (24 lb. to 79.5 lb): 20 sheets.
Output Tray 2:
Plain Paper (21.25 lb.): 3,000
3
sheets (8.5" x 11"
L
/
P
)
Thick Paper (24 lb. to 79.75 lb): 100 sheets.
1
12" x 18" is 304.8 x 457.2 mm that is one-size larger than A3.
2
There are six types of foolscaps: 8.5" x 13.5"
L
, 220 x 330 mm
L
, 8.5" x 13"
L
,
8.25" x 13"
L
, 8.125" x 13.25" and 8" x 13". Any one of these sizes is selectable.
For details, contact your service representative.
3 2,500 Sheet when SD-512 Saddle Finisher is installed.
Staple Mode
Staple Capacity
Available Options
Thick Mode (24.188 lb. to 79.75 lb.) 2 sheets (Cover Mode)
Staple: Plain Paper (17 to 21.25 lb.): 100 sheets;
Center Staple and Fold: Plain Paper (17 to 21.25 lb.): 20 sheets;
(21.25 to 24 lb.): 16 sheets;
Corner Front/Back, Center 2-Point, Booklet:
Maximum number of Stapled sheets: 100 sheets
Thin Paper (14 lb. to 15.688 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled Paper (16 lb. to 24 lb.)
2 to 50 sheets; Booklet: up to 20 sheets
(booklet-making requires SD-512 Saddle Kit)
PK-521 Punch Kit (2/3-Hole Punch), SD-512 Saddle Stitcher,
JS-602 Job Separator Tray (3rd Output Tray), PI-505 Post Inserter,
ZU-606 Z-Fold Unit
Power Requirements Supplied from Main Unit
Max. Power Consumption 105 W or less (when all applicable options are installed)
Dimensions WxDxH
Weight Approx.
28.5" (34.688") x 27.95" x 40.38"
Numbers in parentheses ( ) indicate the values applied when the tray is pulled output.
Approx. 140 lb.
Consumables MS-10A Staples (5,000 Staples x 3) for FS-535
9
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H
Component Considerations
continued
JS-602 Job Separator
(3rd Output Tray for FS-535)
Applicable
AU-211P
FS-535
Type
Feeding function
Output Tray 3
Group, Sort
Paper Type
Paper Size
Paper Capacity
Plain Paper (16 lb. bond to 24 lb. bond)
11" x 17"
L
to 5.5" x 8.5"
L
AU-202H
Plain Paper (21.25 lb. bond): 8.5" x 11"
L
: 100 sheets
Other than 8.5" x 11"
L
: 50 sheets
Width 13.44" x Depth 21.13" x Height 5.88"
AU-211P
AU-204H
Dimensions
Weight Approx. 3.88 lb.
NOTE: The JS-602 functions as a third output tray on the FS-535. When this tray is added, users can sort print, copy and fax output on three different trays.
SD-512 Saddle Stitcher
(For FS-535)
Applicable
Support Paper Weight
Number of Sheets that can be loaded into the Folding Output Tray
Power Requirements
FS-535 Finisher
Thin/Plain Paper (14 lb. to 24 lb.)
20 or 19 Sheets + Thick (55.5 lb.) 1 Sheet
Support Paper Type Center Staple: Plain Paper (17 lb. to 24 lb.)
Half-Fold or Tri-Fold: Plain Paper (17 to 24 lb.)
Support Paper Size Center Staple & Fold, Half-Fold: 12.25" x 18"
L
. 11" x 17"
L
,
8.5" x 14"
L
, Letter
L
Tri-Fold: Letter
L
Max. Number of Sheets 20 Sheets Plain Paper (14 lb. to 24 lb.) that can be Center-Stapled 19 Sheets Plain Paper (14 lb. to 24 lb.) + 1 Sheet Thick (55.5 lb.)
Max. Number of Folded Sheets
Half-Fold: 5 Sheets
Tri-Fold: 3 Sheets
Plain Paper 21.25 lb.
Center Folding
When the length of the paper is 13" or more:
1 to 5 sheets stapled
6 to 10 sheets stapled
11 to 20 sheets stapled
35 sets
30 sets
15 sets
When length of paper is 13" or less:
1 to 5 sheets stapled
6 to 10 sheets stapled
11 to 20 sheets stapled
35 sets
25 sets
15 sets
Half-Fold
When the length of the paper is 13" or more:
1 to 5 sheets folded 35 sets
When the length of paper is 13" or less:
1 to 5 sheets folded 35 sets
Tri Fold
1 sheet folded
2 sheets folded
3 sheets folded
50 sets
40 sets
30 sets
Supplied from Finisher FS-535
Dimensions WxDxH
Weight
Consumables
9.438" x 22.813" x 21"
51.375 lb.; Output Tray: 7.063 lb.
SK-602 Staples (5,000 x 3 Pkg/Case) for SD-512
10
AU-204H
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H AU-204H
AU-211P
Component Considerations
PK-521 Punch Kit
(For FS-535)
Applicable FS-535
Number of Holes
Support Paper Weight
Support Paper Size
Power Requirements
Dimensions WxDxH
Weight Approx.
2 or 3 holes
Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. to 24 lb.),
Thick Paper (24.25 lb. to 79.75 lb.)
2-Hole Punch Setting: 11" x 17" to 5.5" x 8.5", 8" x 13"
3-Hole Punch Setting: 11" x 17" to 8.5" x 11", 7.25" x 10.5"
Supplied from Finisher FS-535
5.75" x 25.188" x 9.188"
Approx. 9.938 lbs.
AU-202H
PI-505 Post Inserter
(For FS-535)
Applicable
Type
Configuration
Cover Paper Type
Cover Paper Size
FS-535
Post Inserter
2 trays (upper and lower)
Plain Paper (16 lb. bond to 24 lb. bond), Thick 24.25 lb. to 55.5 lb.
AU-211P
Upper Tray
8.5" x 11"
L
/
P
, 7.25" x 10.5"
L
/
P
, 5.5" x 8.5"
P
Width: 7.19" to 12.25"; Length: 5.5" to 11.69"
Lower Tray
12" x 18"
L
, 11" x 17"
L
, 8.5" x 14"
L
, 8.5" x 11"
L
/
P
,
7.25" x 10.5"
L
/
P
, 5.5" x 8.5"
P
Width: 7.19" to 12.25"; Length: 5.5" to 11.69"
Plain Paper (21.25 lb.): 200 sheets for each tray
Supplied from Finisher FS-535
Width 20.13" x Depth 25" x 8.69"
AU-204H
Paper Capacity
Power Requirements
Dimensions
Weight
ZU-606 Z-Folding Unit
(For FS-535)
AU-211P
Applicable FS-535
Type Z-Fold Unit
Number of Punch Holes 2 holes, 3 holes
Plain Paper (15 lb. bond to 24 lb. bond) Paper Type when Hole punching is Selected
Paper Size when Hole
Punching is Selected
11" x 17"
L
– 5.5" x 8.5"
L
/
P
Z-Fold
Plain Paper (16 lb. bond – 24. lb. bond)
Fold Type
Paper Type when
Z-Folding is Selected
Paper Size when
Z-Folding is Selected
Power Requirements
Dimensions
Weight
11" x 17"
L
, 8.5" x 14"
Supplied from electrical outlet
Width 6.69" x Depth 26" x Height 40.44"
Approx. 99.19 lb.
L
AU-202H
AU-211P
AU-204H
11
AU-204H
AU-202H
AU-211P
AU-204H
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
Component Considerations
continued
FS-534 Staple Finisher
(50 sheets)
Type
Output Trays
Support Paper Type
Support Paper Size
Mode
Stacking Capacity
Staple Finisher
Output Tray 1, Output Tray 2
Output Tray 1 & Output Tray 2
:
Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to 24 lb. bond),
Recycled Paper 15 lb. to 24 lb.), Thick Paper 1/1+/2/3 (24.25 lb. bond to 79.75 lb. bond), OHP Transparencies, Postcards, Envelopes*,
Label Sheets*, Letterhead*, Tabs*, Banner Paper*.
Staple Settings: Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to 23.94 lb. bond), Recycled Paper 15 lb. to 24 lb.), Thick Paper 1
(24.25 lb. bond to 32 lb. bond), Thick Paper 1+ (32.25 lb. to 41.75 lb.),
Thick Paper 2 (42 lb. to 55.5 lb.)
* Fed into Output Tray 1
Output Tray 1:
12.25" x 18", 11" x 17" to 5.5" x 8.5"
L
/
P
Output Tray 2:
Group/Sort: 12.25" x 18", 11" x 17", 5.5" to 8.5"
L
/
P
Offset Group/Offset Sort: 12.25" x 18", 11" x 17" to 5.5" to 8.5", SRA3
Width: 7.188" to 12.625"; Length 5.875" to 18"
Staple: 11" x 17" to 7.25" x 10.5"
L
/
P
Width: 7.188" to 11.688"; Length 5.875" to 17"
Folding Output Tray:
12.25" x 18", 11" x 17" to 5.5" x 8.5"
L
/
P
Width: 3.5" to 12.5"; Length 5.5" to 18"
Non-Sort, Sort, Group, Sort/Offset, Group/Offset, Sort and Staple
Output Tray 1:
Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. to 24 lb.):
200 sheets. Thick Paper (24.25 to 79.75 lb.), OHP Transparencies,
Postcards, Envelopes or Label Sheets, Letterheads, Tabs: 20 sheets
Output Tray 2 - Group/Sort Mode:
Plain Paper (15.94 lb. to 24 lb.):
3,000 sheets of 8.5" x 11" or smaller, or 1,500 sheets of 8.5" x 14" or larger; or 500 sheets of 5.5" x 8.5" or smaller.
Thick Paper (24.25 to 79.75 lb.), OHP Transparencies, Postcards,
Envelopes, Labels, Letterheads, Tabs: 20 sheets
2nd Tray - Offset Group/Offset Sort:
3,000 sheets (8.5" x 11" or less); 1,500 sheets (8.5" x 14: or more);
500 sheets (5.5" x 8.5" or more)
Thin Paper (14 lb. to 15 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled Paper (16 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.), OHP Transparencies, Postcard,
Envelope. Label sheets, Letterhead, Tabs: 20 sheets
Staple
Thin Paper (14 lb. to 15 lb.): 50 sheets
Plain Paper (15 lb. to 24 lb.): 50 sheets
Recycled Paper (15 lb. to 24 lb.): 50 sheets
Thick Paper (24 lb. to 32 lb.): 30 sheets
Thick Paper 1+ (32.25 lb. to 41.75 lb.): 30 sheets
Thick Paper 2 (42 lb. to 55 lb.): 20 sheets
2–9 Sheets: 100 Sets
10–20 Sheets:
21–30 Sheets:
31–40 Sheets:
41–50 Sheets:
50 Sets
30 Sets
25 Sets
20 Sets
Folding Output Tray:
100 sheets
Thin Paper (14 lb. to 15 lb.)
Plain Paper (15 lb. to 24 lb.)
Recycled Paper (15 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.): 20 sheets continued
12
AU-202H
AU-211P
AU-204H
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
Component Considerations
FS-534 Staple Finisher
continued
PK-520 Punch Kit
(For FS-534)
AU-202H
AU-211P
AU-204H
Staple Mode
Available Options
Paper Sizes: 8.5" x 11" to 11" x 17"; Corner, 2 Position (Side, Top)
PK-520 Punch Kit (2/3-hole Punch)
Power Requirements Supplied from Main Unit
Max. Power Consumption Less than 56 W
Dimensions (W x D x H) 20.81" x 25.25" x 40.25"
(When tray is pulled out 25.88 (W)
88.188 lb.
Weight Approx.
Consumables SK-602 Staples (5,000 Staples x 3)
AU-202H AU-204H
NOTE: FS-534 supports banner printing when installed on C754e/C654e.
AU-211P
Applicable FS-534
Number of holes 2 or 3 holes
Support Paper Weight
Support Paper Size
Power Requirements
Dimensions (W x D x H)
Weight Approx.
Thin Paper (14 lb. to 15 lb.), Plain Paper (15 lb. bond to 24 lb. bond),
Recycled Paper (15 lb. to 24 lb.),
2-hole Punch Setting: 11" x 17", 8.5" x 14", 8.5" x 11"
3-hole Punch Setting: 11" x 17", 8.5" x 11"
Supplied from Finisher FS-534
2.375"x 19.375" x 5.563"
Approx. 3.938 lb.
FS-534 Staple Finisher + SD-511 Saddle Stitcher
* A combination of FS-534 (see specs listed above) and SD-511 (specs listed below)
Applicable FS-534
Number of bins 1 Tray
Paper types Thin Paper (14 lb. to 15 lb.), Plain Paper (15 to 24 lb),
Thick Paper 1/1+/2 (24.25 to 55.5 lb.)*
*Can only be used as a cover page.
Paper sizes 12.25" x 18"
L
, 11" x 17", 8.5" x 14"
L
, 8.5" x 11",
Number of Center Stapled Plain Paper (15 to 24 lb.) or Half-Folded Sheets 1–3 Sheets:
4–10 Sheets:
20 Sets
10 Sets
11–20 Sheets: 5 Sets
Number of
Tri-Folded Sheets
(Letter Only)
1 Sheet:
2–3 Sheets:
30 Sets
10 Sets
Staple mode Booklet, 2-point staple
Maximum staple sheet 20 sheets: (19 sheets/14 to 24 lb.) + (1 sheet/13 to 55.5 lb.)
Dimensions (W x D x H) 8.25" x 21.875" x 21.563"
Weight
Consumables
Power requirements
52.94 lb.
SK-602 (5,000 x 3 pkg/case)
Supplied from finisher
*NOTE: The SD-511 Saddle Stitcher is not available as a separate accessory.
13
AU-202H
AU-202H
AU-211P
AU-204H
AU-211P
AU-204H
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
Component Considerations
continued
OT-503 Output Tray
AU-202H AU-204H
Number of Bins
AU-211P
Paper Capacity
Exit Tray (1)
250 Sheets
NOTE: OT-503 supports banner printing when installed on C754e/C654e.
LU-204 Large Capacity Unit
Type
Support Paper Type
Support Paper Size
Paper Capacity
Large capacity cassette
Thin Paper (14 lb. to 15 lb.)
Plain Paper (16 lb. to 24 lb.)
Thick Paper 1 (24.25 lb. to 32 lb)
Thick Paper 1+ (32.25 lb. to 41.75 lb)
Thick Paper 2 (42 lb. to 55.5 lb.)
Thick Paper 3 (55.75 lb. to 68 lb.)
12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11"*, SRA3
Plain Paper: 2,500 sheets (21.25 lb.)/2,750 (17 lb.)
Thick 1: 2,000 sheets; Thick 1+: 1,450 sheets; Thick 2: 1,250 sheets;
Thick 3: 1,000 sheets
Power Requirements Supplied from main unit
Max. Power Consumption 22 W or less
Dimensions WxDxH
Weight Approx.
22.75" x 21.875" x 15.9375"
Approx. 55 lb.
* The maximum number of loadable sheets for each paper size is 2,500 sheets for 21.25 lb. paper or 2,750 sheets for 17 lb. paper.
LU-301 Large Capacity Unit
Type Large Capacity Cassette
Support Paper Type
Support Paper Size
Paper Capacity
Thin Paper (14 lb. to 15.688 lb.)
Plain Paper (16 lb. bond to 24 lb. bond)
Thick Paper 1 (24.25 lb. bond to 32 lb. bond)
Thick Paper 1+ (32.25 lb. bond to 41.75 lb. bond)
Thick Paper 2 (42 lb. bond to 55.5 lb. bond)
Thick Paper 3 (55.75 lb. bond to 68 lb. bond)
8.5" x 11", A4
Plain Paper: 3,000 sheets
Thick Paper 1: 2,500 sheets (24.25 lb. bond to 32 lb. bond)
Thick Paper 1+: 1,750 sheets (32.25 lb. bond to 41.75 lb. bond)
Thick Paper 2: 1,550 sheets (42 lb. bond to 55.5 lb. bond)
Thick Paper 3: 1,300 sheets (55.75 lb. bond to 68 lb. bond)
Power Requirements Supplied from main unit
Max. Power Consumption 22 W or less
Dimensions WxDxH
Weight Approx.
14.44" x 21.88" x 15.94"
Approx. 39.63 lb.
14
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H AU-204H
AU-202H
AU-211P
AU-102 Biometric Authentication Unit
AU-204H
Biometric Sensor System Transmission-type optical system
Verification Time Approx. 1 sec. or less
Interface
Dimensions WxDxH
USB 2.0
Approx. 2.32" x 3.25" x 2.94"
Weight Approx. 3 oz. (excluding USB cable)
Max. Power Consumption DC 5 V, 500 mA
System Conditions
(during operation)
Ambient temperature: 41º to 95º (F)
Humidity: 20% to 80% (No dew condensation)
System Conditions
(during non-operation)
MFP Compatibility
Ambient temperature: 32º to 122º (F)
Humidity: 20% to 80% (No dew condensation)
bizhub C754, C654, C652DS, C652, C552DS, C552, C452, C360,
C280, C220. Please check
MyKonicaMinolta.com
on a regular basis for compatibility updates.
NOTE: WT-506 Working Table is required for AU-102 Biometric Authentication Unit.
AU-201H HID Proximity Card Authentication Unit
Dimensions (WxHxD)
Weight
Power Supply
System Conditions
(operating mode)
System Conditions
(non-operating mode)
Radio Law Division
Applicable Card
Acquired Standard
Compatible Computer
MFP Compatibility
3.625" x 2.5" x 0.625"
0.25 lb.
Supplied from USB Port
Ambient Temperature: 32°to 104° F
Humidity: 20% to 85%
Ambient Temperature: -4°to 122° F
Humidity: 20% to 85%
Self-Guided Read-Write Communication Facility
ISO 14443 Type A, FeliCa-based non-contact IC Card
VCCI Class B
CPU:
Memory:
HDD:
Monitor:
Network:
Application:
PC/T Compatible, 1 GHz or more
128 MB or more
100 MB or more free space
800 x 600 pixels, 16-bit color or more
TCP/IP
Microsoft Internet Explorer 6.0 (SP1) or later
Microsoft .NET Framework (SP1) or later
bizhub 501, 421, 361, C754, C654, C650, C552, C550, C452,
C451, C360, C353, C280, C253, C220, C203. Please check
MyKonicaMinolta.com
on a regular basis for compatibility updates.
NOTE: WT-506 Working Table or MK-735 Mount Kit (internal mount) is required for AU-201H HID Proximity
Card Authentication Unit.
15
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
Component Considerations
continued
AU-202H HID iClass Card Reader
AU-202H
AU-211P
Dimensions (WxHxD)
Power Supply
System Conditions
(operating mode)
4.0" x 1.9" x 0.09"
0.25 lb.
Supplied from USB Port
Ambient Temperature: 31˚ to 150˚ F
Humidity: 5% to 95%
Transmit Frequency
Environmental
13.56 MHz
IP55
Certifications UL294/cUL (US), FCC Certification (US), IC (Canada), RoHS
Card Type Compatibility All HID 2k, 16k or 32k iClass Cards
26-bit, HID Corporate 1000
®
HID iClass Card
Format Compatibility
MFP Compatibility bizhub C754, C654, C652DS, C652, C552DS, C552, C452, C360,
C280, C220. Please check
MyKonicaMinolta.com
on a regular basis for compatibility updates.
NOTE: WT-506 Working Table or MK-735 Mount Kit (internal mount) required for AU-202H HID iClass Card Reader.
AU-202H
AU-211P
AU-204H Magnetic Stripe Card Reader
AU-204H
Dimensions (WxHxD)
Weight
Power Supply
System Conditions
(operating mode)
1.28" x 1.23" x 3.94"
4.5 oz.
Supplied from USB Port
Ambient Temperature: 40˚ to 158˚ F
Humidity: 10% to 90%
Transmit Frequency
Certifications
3-60 i.p.s.
ISO 7810 and ISO 7811/AAMVA
Card Type Compatibility All magnetic stripe cards
MFP Compatibility bizhub C754, C654, C650, C552DS, C552, C550, C452, C451,
C360, C353, C280, C253, C220, C203, 751, 601, 501, 423, 421, 363,
361, 283, 223. Please check
MyKonicaMinolta.com
on a regular basis for compatibility updates.
NOTE: WT-506 Working Table required for AU-204H Magnetic Stripe Card Reader.
16
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-211P CAC/PIV Solution w/Certificate
AU-204H
AU-211P
Weight
Power Supply
System Conditions
(operating mode)
Interface
Connector Shape
0.13 Ibs.
Supplied from USB Port
Full Speed USB (12 Mbps)
USB A Type Connector
Compatible Card
MFP Compatibility
PKI-C-Card (PIV, CAC)
bizhub 751, 601, 501, 423, 421, 363, 361, 283, 223, C754*, C654*,
C552, C452, C360, C280, C220. Please check
MyKonicaMinolta.
com
on a regular basis for compatibility updates.
* Anticipated availability Summer 2012.
NOTE : WT-506 Working Table required. Please contact your local Government Account Manager for additional information.
WT-506 Working Table
Type
Function
External Table
Holds AU-102 Biometric Authentication Unit, AU-201H HID Proximity
Card Reader
1
, AU-202H HID iClass Reader
2
, AU-204H Magnetic
Stripe Card Reader
3
or AU-211P CAC/PIV Solution
4
; Can be used as a place holder for originals and/or output.
Dimensions WxDxH 18.30" x 16.33" x 1.5"
1 AU-201H HID Proximity Reader can be mounted on WT-506 (or internally with MK-735).
2 AU-202H HID iClass Reader must be mounted on WT-506 (or internally with MK-735).
3 AU-204H Magnetic Stripe Card Reader requires WT-506.
4 AU-211P requires WT-506. Please contact your local Government Account Manager for additional information.
AU-202H AU-204H
EK-604 USB Host/Local Interface
Function
AU-202H
Function
AU-211P
USB Interface and USB Cable
Required to connect optional External Keyboard (or can use EK-605 when Bluetooth printing is also required) or optional i-Option
LK-104 v3 Voice Guidance License kit.
AU-204H
AU-204H
USB Interface and USB Cable
Supports Bluetooth Printing. Required to connect optional
External Keyboard (or can use EK-604 if Bluetooth printing is not required) or optional i-Option LK-104 v3 Voice Guidance
License kit.
KP-101 10-Key Pad
Type
Function
10-Key Pad
Provides hard keys for entering numerical values and supports
Voice Guidance function available with optional LK-104 v3 i-Option
License Kit. Meets Section 508 Accessibility requirements.
17
AU-202H AU-204H
AU-211P
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
AU-202H AU-204H
Component Considerations
continued
AU-211P
MK-728 Mount Kit
Type
AU-204H
AU-204H
Required if you wish to install the FK-508 Fax Kit(s) for Fax Line 3 and Fax Line 4 support. Only one MK-728 Mount Kit required.
AU-211P
AU-211P
MK-735 Mount Kit
Type
Function
Internal Component
Required if you wish to install the AU-201H or AU-202H internally in the device.
IC-414 Fiery Image Controller
AU-202H AU-204H
Type Embedded Type
CPU Intel
®
Pentium E5300 2.6 GHz
Memory
HDD
2 GB
160 GB
Continuous Print Speed
Resolution
Same as Continuous Copy (when using the same original)
600 dpi, 1200 dpi
Page Description Language Adobe PostScript 3 version 3019, PCL6, PDF v1.7
Support Protocol Ethernet (Apple Talk, TCP/IP), HTTP/HTTPS, XPS, SSL/TLS for HTTPS,
SNMP, SMP, Port 9100 (Bi-Directional), IPP, LDAP, IPv6 Phase II, SNMP v3
Support OS
Standard Fonts
Interface
Windows XP, Windows XP x64, Windows 2003 Server, Windows
2003 Server x64, Windows Vista, Windows Vista x64, Windows 7,
Windows 7 x64, Windows 2008 Server (utility only), Windows 2008
Server x64 (utility only); Mac OS X 10.4.11, 10.5x, 10.6x or later;
UNIX/Linux.
Adobe PS 138 Roman fonts; Agfa PCL 80 Roman fonts; 1 bitmap font;
Additional PCL 35 fonts; Euro Currency Resident font
10Base-T/100Base-TX/1000Base-T, USB
AU-211P
VI-506 Interface Kit
Type
Function
Interface Kit
Required interface kit to connect IC-414 Fiery Image Controller to MFP.
LK-101 v3 i-Option License Kit
Type
Function
License Key
Web Browser functions.
LK-102 v3 i-Option License Kit
Type
Function
License Key
Enhanced PDF Encryption (128-bit AES Encryption), PDF/A (1a/1b) and Linearized PDF file support.
Note: The LK-110 supports the same functions as the LK-102 v3, therefore, both license kits cannot be installed on the same device.
18
Konica Minolta bizhub C754e
/
C654e
Specification & Installation Guide
Component Considerations
LK-104 v3 i-Option License Kit
Type
Function
LK-105 v3 i-Option License Kit
License Key
Voice Guidance
Type
Function
License key
Provides Searchable PDF function
Note: The LK-110 supports the same functions as the LK-105 v3, therefore, both license kits cannot be installed on the same device.
LK-106 i-Option License Kit
Type
Function
License key
Supports Bar Code Font Printing
LK-107 i-Option License Kit
Type
Function
License key
Supports Unicode Font Printing
LK-108 i-Option License Kit
Type
Function
License key
Supports OCR Font Printing
LK-110 i-Option License Kit
Type License Key
Function OOXML format file conversion for docx/xlsx, Fax-to-Searchable PDF, convert box data to compact PDF, direct print Email attached file.
Combines LK-102 (Encrypted PDF) & LK-105 (Searchable PDF/OCR) functionality.
Note: If you install the LK-110 on a device, you cannot install the LK-102 v3 and/or LK-105 v3 on the same device.
LK-111 i-Option License Kit
Type
Function
License Key
Provides ThinPrint client support, a technology that compresses print jobs to control bandwidth. ThinPrint can significantly reduce print data network traffic.
UK-204 i-Option Upgrade Kit
Type
Function
2 GB Memory Upgrade (for i-Option License Kits)
Required for LK-101 v3 Web Browser, LK-102 v3 Enhanced PDF Encryption,
PDF/A, Linearized PDF, LK-104 v3 Voice Guidance, LK-105 Searchable
PDF, LK-106 Bar Code Font, LK-107 Unicode Font, LK-108 OCR Font and PageScope My Panel (only one upgrade kit required per device).
SC-508 Copy Guard Kit
Type
Function
Embedded Type
Prevents printing of Copy Protected documents.
Please note that two SC-508 Copy Guard Kits are required for C754e and C654e since these models offer a standard Dual Scan
Document Feeder (one Copy Guard Kit required for each side scanned).
19
ಡೌನ್ಲೋಡ್ ಮಾಡಿ
ಸಾರ್ವಜನಿಕ ಲಿಂಕ್ ನವೀಕರಿಸಲಾಗಿದೆ
ನಿಮ್ಮ ಚಾಟ್ಗೆ ಸಾರ್ವಜನಿಕ ಲಿಂಕ್ ಅನ್ನು ನವೀಕರಿಸಲಾಗಿದೆ. You may view and manage your chat links after registration here.
ದಾಖಲೆಯ ಸಾರ್ವಜನಿಕ ಲಿಂಕ್
ಜಾಹಿರಾತು