Ordering Information. AMS AS5510
AMS AS5510 is a 10-bit linear incremental position sensor that offers precise angle measurement with a resolution of 1.95µm/LSB. It employs a simple 2-pole magnet to measure lateral movement with an air gap of around 1.0mm. The device features an I²C interface, allowing for easy connectivity to microcontrollers. With its compact size and low power consumption, AS5510 is ideal for applications requiring accurate position sensing in limited spaces.
Annonce
Annonce
AS5510-AB-Manual
9
Ordering Information
Table 2:
Ordering Information
Ordering Code Description comments
AS5510-WLCSP-AB AS5510 Adapterboard Adapterboard with sensor in wlcsp package
10 Copyright
Copyright ams AG, Tobelbader Strasse 30, 8141 Unterpremstätten, Austria-Europe. Trademarks
Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.
11 Disclaimer
Devices sold by ams AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. ams AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein. ams AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with ams AG for current information. This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by ams
AG for each application. This Product is provided by ams “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services.
12 Contact Information
Headquarters ams AG
Tobelbader Strasse 30
8141 Unterpremstaetten
Austria
T. +43 (0) 3136 500 0
For Sales Offices, Distributors and Representatives, please visit: http://www.ams.com/contact www.ams.com Revision 1.2 - 21/08/13 page 11/11
Download
Annonce