Maintenance. Husqvarna S 13 Single Phase Dust Extractor

Husqvarna S 13 Single Phase Dust Extractor is a powerful and versatile tool designed for professional use in construction, woodworking, and other industries. With its robust construction and advanced filtration system, the S 13 is capable of extracting and separating even the finest dust particles, ensuring a clean and healthy work environment. Key features of this machine include its compact size, lightweight design, and easy-to-use controls. The S 13 is an excellent choice for contractors and professionals who demand a reliable and efficient dust extractor.

PDF

Document

The filter must be cleaned from time to time. This must be done before changing the plastic bag collection system and should also be done when work is completed or when there is poor suction.

1. While running the dust extractor, seal the inlet using the inlet plug or the inlet valve.

2. Let the dust extractor build up vacuum for 5 seconds, then quickly push and hold down the Jet

Pulse handle for 5 seconds.

3. Repeat step 2 five times. It is important to let the dust extractor rebuild the vacuum in between every repetition.

4. If suction remains poor, the filter should be replaced.

Only replace plastic bag after cleaning the filter.

Maintenance

Introduction

WARNING:

Use personal safety

equipment, refer to

Personal protective equipment on page 6

, during service. Dust can be exposed during maintenance and service.

WARNING:

The motor should be switched off during operations described in this chapter unless otherwise stated.

WARNING:

All checks involving electric components should only be performed by a licensed electrician.

WARNING:

Most accidents involving machines occur during trouble shooting, service and maintenance as staff have to locate themselves within the risk area of the machine. Prevent accidents by being alert and by planning and preparing the work.

Maintenance schedule S - Line Dust

Extractor

The maintenance intervals are calculated from daily use of the product. The intervals change if the product is not used daily.

Maintenance

Look for signs of wear, damage or loose connections of the controls before the unit is connected.

Do a check that the Longopac is correct.

Do a check of the filter cleaning mechanism.

Before each use

Do a check of the dust hose and the connections.

Do a check of the wheels.

Look for damage and bad connections.

Clean the pre-filter.

Replace the pre-filter.

Replace the HEPA filter

Daily

Weekly

When suction is low

6 months or

1000h

12 months or 2000h

To clean the dust extractor

It is important to clean the dust extractor to prevent circulation of dangerous dust. Always clean the dust extractor before it is moved from the work area.

WARNING:

Turn the motor switch to its OFF position and disconnect the cord from the wall outlet before you clean or do maintenance to the product.

948 - 003 - 01.12.2022

Key features

Powerful suction for effective dust extraction
Advanced HEPA filtration system for capturing even the finest dust particles
Compact and lightweight design for easy portability
Easy-to-use controls for intuitive operation
Durable construction for long-lasting performance
Automatic filter cleaning system for maintaining optimal suction power
Longopac dust bags for easy and hygienic disposal

Frequently asked questions

The S 13 is designed to extract dry, non-combustible dust with an explosion limit value of >0.1mg/m3. This includes dust generated from construction materials, woodworking, and other industrial processes.

The S 13 has an automatic filter cleaning system that helps to maintain optimal suction power. However, you should periodically inspect the filter and clean it if it becomes clogged.

The S 13 uses Longopac dust bags, which are available in various sizes to suit different applications.