System Information Menu. D-Link DES-3224 - Switch, 3224TG - Switch, DES-3224

10/100 Auto Negotiation Switch User’s Guide

System Information Menu

The System Information menu, displayed in Figure 10, allows you to enter management and configuration information on the DES-3224.

Figure 10: System Information menu

Hardware Revision

Specifies the hardware revision and the product generation. Each revision is numbered incrementally.

Boot PROM Firmware Version

Specifies the version of the Boot PROM being used on the DES-3224. Each version is numbered incrementally.

Software Version

Specifies the software version being used on the DES-3224. You can update the software.

Each version is numbered incrementally.

MAC Address

Specifies the hardwired address of DES-3224. This address cannot be changed.

Managing the DES-3224

23

10/100 Auto Negotiation Switch User’s Guide

System Description

Brief manufacturer description of the DES-3224. This value cannot be changed.

System Name

Specifies the full name of the DES-3224. This value can be changed, allowing you to assign a unique name to the DES-3224. You can enter up to 44 characters.

System Location

Specifies the physical location of the DES-3224, such as a building number or street address.

You can enter up to 44 characters.

System Contact

Specifies the contact information of the network administrator. You can enter up to 44 characters.

LAN IP Address

Specifies the unique IP address of your LAN. You can enter up to 15 characters.

LAN Subnet Mask

Specifies the subnet mask, if you are subnetting. If you are not subnetting leave the default in place. You can enter up to 15 characters.

LAN Default Gateway

Specifies the default gateway. You can enter up to 15 characters.

Follow these steps to enter user changeable information:

Select the field you would like to edit.

1. Delete the default information

2. Enter the new information.

3. Select Save and press Enter. Follow screen prompts.

Managing the DES-3224

24