BUTTON SEWING. Euro-Pro 9136C

03 b a b

2.0~7.0

BUTTON SEWING

Change the presser foot to the button sewing foot.

Move the drop feed control to " the feed dogs.

" to lower

2.0~7.0

Position the work under the foot. Place the button in the desired position, lower the foot.

Select zig zag pattern. Adjust the stitch width to "2.0-7.0" according to the distance between the two holes of the button.

Turn the handwheel to check that the needle goes cleanly into the left and right holes of the button.

Before sewing, press the Auto-lock button to sew reinforcement stitches automatically at the beginning and at the end of the stitch.

If a shank is required, place a darning needle on top of the button and sew.

For buttons with 4 holes, sew through the front two holes first, push work forward and then sew through the back two holes.

32