Setting alarm times (Alarms 1 and 2). Silvercrest KH 2281

IB_KH2281_Ar5027_LB6 15.07.2008 9:04 Uhr Seite 7

Programming the kitchen timer

You can save kitchen timer periods.

1.

Press the button

TIMER/ALARM MODE

t

.

2.

Using the button

TUNING UP/DOWN

g

programme in the desired time.

3.

Press the button

STORE

f

. In the display "T" blinks.

4.

Press the button

1/3 PRESET, 2/4 PRESET

o

for the required save position. There are four save locations at your disposal. In the display the number of the selected save location appears.

5.

Press the button

STORE

f

once again. The time period is now saved.

If a button is not pressed within ten seconds, the kitchen radio switches back to time display.

6.

To recall the saved kitchen timer settings, press the button

TIMER/ALARM MODE

t

and the button of the corresponding memory save location (

1/3

PRESET, 2/4 PRESET

o

).

7.

Press the button

TIMER/ALARM MODE

t

once more to start the kitchen timer. A clock symbol running in an anti-clockwise direction appears on the display.

8.

To switch the kitchen timer off, hold the button

TIMER/ALARM MODE

t

pressed down.

Setting alarm times (Alarms 1 and 2)

You can programme two alarm times into your kitchen radio.

Alarm function

Acoustic signal

Radio

Switched off

Symbol in the display no symbol

2.

Press the button

TUNING UP/DOWN

g

to set the desired alarm time.

3.

Press the button

ALARM 1/VOL+

y

(or

ALARM 2/

VOL-

i

) repeatedly until the desired alarm type

(see table above) is shown in the display.

4.

Press the button

A.O.T.

d

to set the weekdays on which you require the alarm function:

You can select between workdays (Mo, Tu,

We, Th, Fr), weekends (Su, Sa), whole weeks

(Su, Mo, Tu, We, Th, Fr, Sa) or the present weekday. The selected setting is shown on the display.

5.

Press the button

A.O.T.

d

repeatedly until the desired alarm days are programmed in. Keep the button

A.O.T.

d

pressed down until a single day appears on the display.

6.

Press the button

A.O.T.

d

to set the required weekday.

To return to the selection of workdays, weekends or whole weeks, once again hold the button

A.O.T.

d

briefly pressed down.

7.

Press the button

MODE SET/BASS

j

to save the programming and to return to time display.

When the alarm signal sounds...

• and the alarm function "Radio" has been selected, the radio plays for one hour at a pre-defined alarm volume. This volume level cannot be changed. To finish it, press the button

ALARM

1/VOL+

y

or

ALARM 2/VOL-

i

.

• and the alarm function "Signaltones" has been selected, the signal tone sounds for 10 minutes.

To finish it, press the button

ALARM 1/VOL+

y

or

ALARM 2/VOL-

i

.

1.

Press the button

ALARM 1/VOL+

y

(or

ALARM 2/

VOL-

i

). The last set alarm time for A1 resp. A2 and, possibly, the symbol for the type of alarm

(see table above) are shown on the display.

- 7 -