Interactive Plug In Menu. JVC i'art 1004tnh-ii-im, LCT1609-001B-A, 1004TNH-II-IM, I'Art Pro AV-48P575

Quick Setup Plug-In Menu

Step 3 – The Interactive Plug In Menu

When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for:

• The language in which you want the onscreen menus to appear.

• Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clock.

• The auto tuner setup of which channels you wish to receive.

We recommend you complete the interactive plug-in items before you start using your television.

Notes:

• The interactive plug-in menu setting does not appear if your TV has been turned on before.

In this case use the onscreen menus to perform these settings. See pages 42, 53 and 31.

• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.

Language

After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your onscreen menus in three languages: English, French (Français) or Spanish (Español).

LANGUAGE/LANGUE/IDIOMA

è

To choose a language:

(English, Français or Español)

†

To NEXT (To set clock)

ENGLISH

NEXT

SELECT OPERATE

MENU

EXIT

(To be continued...)

21

10/26/04, 10:47:29 AM LCT1609 English B 21

Quick Setup Plug-In Menu

Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal:

è

To

SET CLOCK

MODE

TIME

TIME ZONE

D.S.T.

NEXT

SELECT OPERATE

AUTO

-- : -- --

ATLANTIC

ON

MENU

EXIT

è

To select your time zone: (Atlantic, Eastern,

Central, Mountain, Pacific, Alaska or

Hawaii)

†

To move to D.S.T. (Daylight Savings Time)

è

To turn D.S.T. ON or OFF

†

To NEXT (To Auto Tuner Setup)

Notes:

• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.

• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in

October.

• You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

Manual Clock Set

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose

AUTO, see auto clock set above.

SET CLOCK

è

To choose MANUAL

†

To TIME

è

To set the hour

MODE

TIME

TIME ZONE

D.S.T.

MANUAL

-- : -- --

ATLANTIC

ON

START CLOCK

SELECT OPERATE

MENU

EXIT

è

To set the minute

†

To Start Clock

Note:

• You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

(To be continued...)

22

LCT1609 English B 22 10/26/04, 10:47:29 AM

Quick Setup Plug-In Menu

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C

HANNEL

+/– buttons) you will receive only clear, active channels.

AUTO TUNER SETUP

è

To choose CABLE or AIR (or SKIP when

you skip Auto Tuner Setup)

†

To START

TUNER MODE CABLE

NOW

PROGRAMMING !

START

SELECT OPERATE

MENU

EXIT

48

Programming will take approximately 1 to 2 minutes.

When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

• Noise muting will not work during Auto Tuner Setup.

• Skip appears only for interactive plug-in menu.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.

LCT1609 English B 23

STOP

The Quick Setup is complete

23

10/26/04, 10:47:30 AM