advertisement
Advanced-Viewing
Displaying Multiple Screens
( Multi Playback)
1 Rotate the zoom lever towards
[ ] [W] to display multiple screens.
JAN. 15. 2008
1/34
CANCEL
MENU
•
•
For example: When you have chosen to show 12 pictures
: 1 screen ➝ 12 screens➝
30 screens ➝Calendar screen display ( P79 )
Rotate the zoom lever towards [3] [T] to return to the previous screen.
2
Press e/r/w/q to select a
picture.
JAN. 15. 2008
A
2/34
• Depending on the recorded picture and the setting, the following icons will appear.
–
–
–
–
–
–
–
[ ] (Favorites)
[ ] (Motion picture)
[
K
] ([BABY1] / [BABY2] mode),
[ ] ([PET] mode)
[ ] (Travel date)
[ ] (Travel destination)
[ ] (Title edit complete)
[ ] (Text stamp complete)
■
Example of 30 screens
JAN. 15. 2008 6/34
CANCEL
MENU
■
To return to the normal playback
Rotate the zoom lever towards [3] [T], or press [MENU/SET].
2
3
•
■
The image you select is shown.
To delete a picture during a multi playback
1
Press e/r/w/q to select a picture and then press [ ].
Press w to select [YES].
Press [MENU/SET].
CANCEL
MENU
A
Number of the selected picture and the total number of recorded pictures
•
•
•
•
During multi playback, you cannot clear the shooting information from the display by pressing [DISPLAY].
Pictures will not be displayed in the rotated direction even if [ROTATE DISP.] is set to [ON].
Pictures will be displayed only in 12 screens during category playback [ ] and favorite [
★
] playback.
Multi playback cannot be activated during in slide show [ a
].
78
VQT1L86
Advanced-Viewing
Displaying Pictures by Recording Date
( CALENDAR)
You can display pictures by recording date using the calendar function.
1 Rotate the zoom lever towards
[ ] [W] several times to display the calendar screen.
SUN MON TUE WED THU
6 7
1
8
2
9
3
10
FRI
4
11
SAT
5
12
13
20
14
21
15
22
16
23
17
24
18
25
19
26
27 28 29 30 31
2008
DAY MONTH
SET
•
•
The recording date of the picture selected in the playback screen becomes the date selected when the calendar screen is fi rst displayed.
If there are multiple pictures with the same recording date, the fi rst picture recorded on that day is displayed.
•
2
Press e/r/w/q to select the date
to be played back.
e
/r: Select the month w
/q: Select the date
If there were no pictures recorded during a month, the month is not displayed.
3 Press [MENU/SET] to display the pictures that were recorded on the selected date.
JAN.15.2008
1/34
•
4
Press e/r/w/q to select a picture
and then press [MENU/SET].
The selected picture is displayed on the 1 screen playback screen.
■
To return to the 1 screen playback screen
After the calendar screen is displayed, rotate the zoom lever towards [3] [T] to display 30 screens, 12 screens and 1 screen.
•
•
•
•
•
•
The pictures are displayed without being rotated even if you set [ROTATE DISP.] to [ON].
You can display the calendar between
January 2000 and December 2099.
If the recording date of the picture selected in 30 screens multi playback is not between January 2000 and December 2099, the camera automatically displays it in the latest calendar date.
Pictures edited on a PC or processed on other equipment may be displayed with dates different from the actual recording dates.
If the date is not set in the camera, the recording date is set as January 1st,
2008.
If you take pictures after setting the travel destination in [WORLD TIME], the pictures are displayed by the dates at the travel destination in calendar playback.
CANCEL
MENU
• To return the calendar screen, press
79
VQT1L86
Advanced-Viewing
Using the Playback Zoom
1 Rotate the zoom lever towards
[3] [T] to enlarge the picture.
1
2
3
■
To stop using the playback zoom
Rotate the zoom lever towards [ ] [W] or press [MENU/SET].
■
To delete a picture during the playback zoom
Press [ ].
Press w to select [YES].
Press [MENU/SET].
A
CANCEL
DELETE
•
•
3 : 1× ➝2×➝4×➝8×➝16×
When you rotate the zoom lever towards
[ ] [W] after enlarging the picture, the magnifi cation becomes lower. When you rotate the zoom lever towards [3] [T], the magnifi cation becomes higher.
When you change the magnifi cation, the zoom position indication A appears for about 1 second to check the position of the section enlarged.
2
Press e/r/w/q to move the
position.
•
•
•
•
During playback zoom, you can press
[DISPLAY] to show or clear the shooting information.
The more the picture is enlarged, the more its quality deteriorates.
If you want to save the enlarged picture, use the trimming function. ( P92 )
The playback zoom may not operate if pictures have been recorded with other equipment.
CANCEL DELETE
• When you move the position to be displayed, the zoom position indication is displayed for about 1 second.
80
VQT1L86
Advanced-Viewing
Playing Back Pictures Automatically
(
a
Slide Show)
Set the recording/playback switch to the playback [
Q
]. ( P18 )
Playing back pictures automatically in order. Recommended when viewing on TV screen, etc.
1
Press [MENU/SET] and press q.
2
Select [SLIDE SHOW] with e/r
and then press [MENU/SET] button.
PLAYBACK MODE
NORMAL PLAY
SLIDE SHOW
CATEGORY PLAY
FAVORITE PLAY
SELECT SET
3
Select a slide show item with e/r
and press [MENU/SET].
SLIDE SHOW
ALL
CATEGORY SELECTION
FAVORITE
ALL SLIDE SHOW
START
EFFECT
SETUP
NATURAL
MENU
SET
CANCEL A SELECT SET
• The cursor displayed during playback corresponds to e/r/ w
/q.
To fi nish the slide show [
a
]
Press r.
Pausing
Press e during playback.
Pause will be released when you press e again.
To adjust the volume
Rotate the zoom lever.
To return to the previous screen
Press [ ].
MENU
SET
CANCEL A SELECT SET a
ALL
CATEGORY
SELECTION
FAVORITE
All pictures
Select a category ( P83 ) with e/r/w/q and press
[MENU/SET].
Pictures set as
[FAVORITE] ( P95 ) is played back.
Set [FAVORITE] to [ON] and set any pictures as favorites.
4
Select [START] with e and press
[MENU/SET].
81
VQT1L86
Advanced-Viewing
■
Setting EFFECT
1
Select [EFFECT] in step 4 and press q.
2
Select one of EFFECTs for your preference with e/r and press [MENU/
SET].
EFFECT Details
AUTO
(only when [CATEGORY] is selected)
The camera automatically adjusts the effect.
NATURAL Slow effect with music (1)
SLOW
SWING
URBAN
OFF
Slow effect with music (2)
Up-tempo effect with music
(1)
Up-tempo effect with music
(2)
No effect
■
Setting DURATION or REPEAT
1
Select [SETUP] in step 4 and press q.
2
Select settings with e/r and press q.
Settings Details
DURATION (only when [OFF] is selected)
Select seconds (1, 2, 3, 5) with e/r and press [MENU/
SET].
REPEAT Select [ON] or [OFF] with e
/r and press [MENU/SET].
MUSIC (only when effects other than
[OFF] is selected) Select
[ON] or [OFF] with e/r and press [MENU/SET].
•
3
Press [MENU/SET].
The following functions cannot be used for slide show [ a
].
– Motion picture playback
– POWER SAVE (However while paused,
POWER SAVE functions for fi xed 10 minutes.)
82
VQT1L86
Advanced-Viewing
Searching by Recording Information
( Category Playback)
Set the recording/playback switch to the playback [
Q
]. ( P18 )
You can perform category playback by classifying pictures according to the recording information such as scene mode
([PORTRAIT], [SCENERY], etc.).
1
Press [MENU/SET] and press q.
2 Select [ CATEGORY PLAY]
with e/r and then press [MENU/
SET].
PLAYBACK MODE
NORMAL PLAY
SLIDE SHOW
CATEGORY PLAY
FAVORITE PLAY
SELECT SET
•
•
•
• Category search starts.
If a picture is found in a category, the category icon turns blue.
The more pictures there are, the more time it takes to search.
Press [ ] to cancel searching.
3
Select category using e/r/w/q
and press [MENU/SET].
CATEGORY
Category
6
(PORTRAIT etc.)
8
(SCENERY etc.)
(NIGHT
SCENERY etc.)
(Event)
K
Recording information such as scene
PORTRAIT mode, i PORTRAIT, SELF
PORTRAIT, NIGHT
PORTRAIT, i NIGHT
PORTRAIT, BABY1, 2
SCENERY mode, i SCENERY, SUNSET,
AERIAL PHOTO
NIGHT PORTRAIT mode, i NIGHT PORTRAIT, i NIGHT SCENERY,
STARRY SKY
SPORTS mode, PARTY,
CANDLE LIGHT,
FIREWORKS, BEACH,
SNOW, AERIAL PHOTO
BABY1, 2
PET
FOOD
TRAVEL DATE
Motion Picture
4
Select a picture using w/q.
10
M
100-0001
1/19
BABY
CANCEL A SELECT SET
•
•
Turn the zoom lever to [
2
] (W) and
12 screen will be displayed. Turn to
[
3
] (T) to enlarge pictures.
If [
★
FAVORITE] is set to [ON], you can register the pictures as favorite by pressing r. ( P95 )
• When one of the following operations is done, the category playback mode [ ] is canceled.
– Changes the mode to other playback
– mode or to recording mode
Turns the camera off
83
VQT1L86
Advanced-Viewing
Playing Back Your Favorite Pictures
(
★
Favorite Play)
Set the recording/playback switch to the playback [
Q
]. ( P18 )
You can playback the pictures set as favorites only.
1
Press [MENU/SET] and press q.
2
Select [★ FAVORITE PLAY] with
e
/r and then press [MENU/SET].
PLAYBACK MODE
NORMAL PLAY
SLIDE SHOW
CATEGORY PLAY
FAVORITE PLAY
■
To cancel the favorite setting [
★
]
You may not be able to cancel the favorite in [ ★ FAVORITE PLAY]. If r is pressed while the [ ★] favorites icon is displayed in
[ NORMAL PLAY] or [ CATEGORY
PLAY] the favorites setting is canceled.
(Refer to P 95 for details.)
• When one of the following operations is done, the favorite playback mode [
★
] is canceled.
–
–
Changes the mode to other playback mode or to recording mode
Turns the camera off
•
SELECT SET
[
★
FAVORITE PLAY] does not appear when the [FAVORITE] is set to [OFF], and is not selectable if no picture is set as favorite.
3
•
Select a picture using w/q.
Turn the zoom lever to [
2
] (W) and
12 screen will be displayed. Turn to
[
3
] (T) to enlarge pictures.
84
VQT1L86
Advanced-Viewing
Playing Back Motion Pictures
[
Press w/q to select a picture with a
motion picture icon [ ] / [ ] /
] / [ ] / [ ] / [
and then press e to play back.
] A
A
30fps
VGA
100-0001
1/19
15
S B
•
•
The motion picture recording time B is displayed on the LCD monitor. After playback starts, the elapsed playback time is displayed on the upper right of the LCD monitor. For example, 8 minutes and 30 seconds is displayed as [8m30s].
The cursor displayed during playback corresponds to e/r/w/q.
To stop motion picture playback
Press r.
Fast forwarding/Fast rewinding
•
During motion picture playback, keep pressing w/q.
q
: Fast forward w
: Fast rewind
When releasing the button, it turns to normal motion picture playback.
•
To pause
Press e during motion picture playback.
Press e again to cancel pause.
Frame-by-frame forward/reverse viewing
Press w/q during pause.
To adjust the volume
Rotate the zoom lever.
•
•
•
•
•
•
•
Sound can be heard through the speaker.
Refer to [VOLUME] ( P21 ) for information about how to adjust the volume in the
[SETUP] menu.
The fi le format that can be played back with this camera is QuickTime Motion
JPEG.
Please note that the bundled software includes QuickTime to play back motion picture fi les created with the camera on the PC ( P100 ) .
Some QuickTime Motion JPEG fi les recorded by a PC or other equipment may not be played back with this camera.
When playing back motion pictures that have been recorded with other
–
–
–
–
– equipment, the quality of pictures may be deteriorated or it may not be possible to play them back.
When using a high capacity card, it is possible that fast rewinding may be slower than usual.
You cannot use the following functions with motion pictures.
– Playback zoom (While playing back or pausing motion pictures)
[ROTATE DISP.]/[ROTATE]
[TITLE EDIT]
[TEXT STAMP]
[RESIZE]/[TRIMMING]
[ASPECT CONV.]
85
VQT1L86
Advanced-Viewing
Using the [PLAYBACK] Mode Menu
You can use various functions in playback mode to rotate pictures, set protection for them etc.
1 Press [MENU/SET].
2
Press r to select [
] and then
press q.
3
Press e/r to select the menu
item and then press q.
PLAYBACK
CAL
CALENDAR
TITLE EDIT
TEXT STAMP
RESIZE
TRIMMING
SELECT SET
SINGLE
MULTI
•
•
A
• Press r at A to switch to the next menu screen.
You can switch menu screens from any menu item by rotating the zoom lever.
After selecting a menu item in step 3, refer to the description of the menu item in the operating instructions and then set it.
Items you can set
Menu Page
Page 1
Page 2
Item
CALENDAR ( P86 )
TITLE EDIT ( P86 )
TEXT STAMP ( P88 ) e RESIZE
( P90 ) f
TRIMMING ( P92 ) i ASPECT CONV. ( P93 ) b ROTATE
( P94 )
Page 3 j ROTATE DISP. ( P94 )
★
FAVORITE ( P95 ) l
DPOF PRINT ( P96 ) g
PROTECT ( P98 )
COPY ( P99 )
86
VQT1L86
•
•
When saving the edited picture in [TEXT
STAMP], [RESIZE], [TRIMMING] and
[ASPECT CONV.], the picture will be saved as new fi le. Check remaining capacity of the card or built-in memory before using those functions.
During Category Playback and Favorite
Play, only [ROTATE], [ROTATE DISP.],
[DPOF PRINT] and [PROTECT] can be set.
[ CALENDAR]
Seaching pictures at the date
You can search pictures by recording date using the calendar function.
Select [ CALENDAR] from playback menu.
SUN MON TUE WED THU
1 2 3
FRI
4
SAT
5
6
13
20
7
14
21
8
15
22
9
16
23
10
17
24
11
18
25
12
19
26
27 28 29 30 31
2008
DAY MONTH SET
Refer to the step 2 - 4 on P 79 for further operations.
[ TITLE EDIT]
Adding text (comments) to pictures
You can add text (comments) to pictures.
After text has been registered, it can be included in prints using [TEXT STAMP]
( P88 ) . (Only alphabetic characters and symbols can be entered.)
Select [ TITLE EDIT] from playback menu.
■
Common operation
Press e/r to select [SINGLE] or
[MULTI] and then press [MENU/
SET].
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
PLAYBACK
CAL
CALENDAR
TITLE EDIT
TEXT STAMP
RESIZE
TRIMMING
SELECT SET
SINGLE
MULTI
•
–
–
Title edit cannot be used on the following pictures.
Images recorded with other equipment
Protected pictures
– Motion pictures
■
Single setting
After the common operation
1
Select a picture using w/q and
press [MENU/SET].
TITLE
EDIT
10
M
100-0001
1/19
Text
Cursor
Blank
Delete
Press [DISPLAY] to switch text between [A] (capitals), [a]
(small case) and [&1] (special characters and numbers).
Rotate the zoom lever.
Move the cursor to [SPACE] and press [MENU/SET].
Move the cursor to
[DELETE] and press
[MENU/SET].
•
•
•
Refer to next page for an example of the text entry.
A maximum of 30 characters can be entered.
To stop editing during text entry, press
MENU
SET
CANCEL A SELECT SET
MENU
• The title edit icon [ ] is displayed for pictures that have already been recorded with text in [BABY] or [PET] name settings.
2
Select text using e/r/w/q and
press [MENU/SET] to register.
3 Move the cursor to [EXIT] and press [MENU/SET] to fi nish text input.
4 Press [ ] twice to close the menu.
■
Multi setting (up to 50 pictures)
After the common operation
1 Select the picture using
e
/r/w/q and press [DISPLAY] to
set/cancel.
TITLE EDIT
7 8 9
SPACE DELETE EXIT
CANCEL A
CURSOR
W-T
SELECT
INPUT
10
CANCEL A
SELECT
11
SET/CANCEL
OK
Set The [ ] icon appears.
Cancel
The [ ] icon disappears.
• Repeat this step.
2 Press [MENU/SET].
After performing step 2, perform step 2 to 3 onwards in “Single setting”.
Press [MENU/SET] to close the menu.
87
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
■
1.
2.
Delete the title (for [SINGLE] only)
In step 2 when [SINGLE] is selected, delete all the texts, select [EXIT], and press [MENU/SET].
Press [ ] twice to close the menu.
•
•
•
Registered text can be displayed on the screen of this unit. (Displayed on slide if too many texts are input.)
The name setting of [BABY] or [PET] mode can be registered by using the same operation as “Single setting”.
However, the name setting and [TITLE
EDIT] cannot be registered at the same time.
You can use the software
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied) to print the text
(comments). For details, refer to the operating instructions (PDF fi le) of the software.
[ TEXT STAMP]
Stamping the text on your pictures
You can stamp the set text, date and time of recording, the age and the travel date on the recorded pictures.
This function is suitable when you print
4˝ × 6˝/10 × 15 cm images. (Images are resized when you add the text to the pictures taken with a resolution of more than [ ].)
Select [ TEXT STAMP] from playback menu ( P86 ) .
■
Common operation
Press e/r to select [SINGLE] or
[MULTI] and press [MENU/SET].
Example of text entry
In case of entering [LUMIX]:
1
Move e/r/w/q to move the cursor to
[L] and then press [MENU/SET].
2
Move e/r/w/q to move the cursor to
[U] and then press [MENU/SET].
3
Move e/r/w/q to move the cursor to
[M] and then press [MENU/SET].
4
Move e/r/w/q to move the cursor to
[I] and then press [MENU/SET].
5
Move e/r/w/q to move the cursor to
[X] and then press [MENU/SET].
PLAYBACK
CAL
CALENDAR
TITLE EDIT
TEXT STAMP
RESIZE
TRIMMING
SELECT SET
SINGLE
MULTI
MENU
SET
•
–
–
–
–
You cannot add the texts or the date to the following images.
Images taken when the clock is not set
Images that already have texts on them
Motion pictures
Images recorded with other equipment
■
Single setting
After the common operation
1
Press w / q to choose a picture,
then press [MENU/SET].
TEXT
STAMP
10
M
100-0001
1/19
MENU
SET
CANCEL A SELECT SET
88
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
2
Press e/r/w/q to select
[SHOOTING DATE], [AGE],
[TRAVEL DATE] or [TITLE] and change the settings for the item, and then press [MENU/SET].
4
Press e to select [YES] and
press [MENU/SET].
(Screen when you have chosen an image taken at [h])
TEXT STAMP
SHOOTING DATE
AGE
TRAVEL DATE
TITLE
W/O TIME
OFF
OFF
OFF
CANCEL A SELECT SET
■
SHOOTING DATE
OFF Date and time does not added
W/O TIME Date added
WITH TIME Date and time added
■
AGE
OFF
ON
Age not added
Age added
■
TRAVEL DATE
OFF Travel dates not added
ON Travel dates added
■
TITLE
OFF
ON
Title or name is not added
Title or name in [BABY] or
[PET] mode is added
TEXT STAMP
IT WILL BE STAMPED ON THE
PICTURE RESIZED TO
SAVE NEW PICTURES?
3
M .
YES
NO
MENU
SET
CANCEL A SELECT SET
• If you select [NO], the screen returns to the one shown in step
2
•
•
5 Press [ ] twice to close the menu.
Pictures that have been text stamped will be marked with the text stamp complete indicator A.
To confi rm the text stamp B, use playback zoom ( P80 ) .
3
M
100-0020
20/20
JAN.1.2008
A
B
•
3 Press [MENU/SET].
Images are resized as follows when you add the text to the pictures taken with a high resolution.
h j
or more ➞
or more
➞
or more ➞
• The picture becomes slightly rougher.
89
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
■
Multi setting (up to 50 pictures)
After the common operation
1 Select the picture using
e
/r/w/q and press [DISPLAY] to
set/cancel.
TEXT STAMP
7 8
10
CANCEL A
SELECT
11
SET/CANCEL
OK
9 e
[ RESIZE]
Making the picture smaller
This function is useful if you want to reduce the fi le size of the picture in cases when it needs to be attached to an e-mail or uploaded to a website.
Select [
e
RESIZE] from playback menu ( P86 ) .
■
Common operation
Select [SINGLE] or [MULTI] with
e
/r and press [MENU/SET].
Set The [ ] icon appears.
Cancel The [ ] icon disappears.
• Repeat this step.
2 Press [MENU/SET].
After performing step 2, perform step 2 to 4 onwards in “Single setting”.
Press [MENU/SET] to close the menu.
PLAYBACK
CAL
CALENDAR
TITLE EDIT
TEXT STAMP
RESIZE
TRIMMING
SELECT SET
SINGLE
MULTI
•
•
•
•
•
Note that if you use text stamp and then specify printing the date when you order prints or on a printer, both dates will be printed and may overlap.
Make sure there is some space available on the built-in memory or card.
The text may be cut off with some printers.
The printed texts may be blurred on the pictures with the resolution of .
Once you have added the text stamp, you will no longer be able to use the
–
– following functions with the pictures.
– [TEXT STAMP]
Date print setting in [DPOF PRINT]
[RESIZE]
–
–
[TRIMMING]
[ASPECT CONV.]
■
Single setting
After the common operation
1
Press w/q to select the picture
and then press [MENU/SET].
7
M
100-0001
1/19
CANCEL A SELECT SET
MENU
SET
• The following pictures cannot be resized.
Aspect ratio Picture size
h j
–
–
Motion pictures
Pictures imprinted with the text stamp
90
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
2
Press w/q to select the size and
then press [MENU/SET].
2 Select the picture with
e
/r/w/q and press [DISPLAY] to
set/cancel.
7
M
5
M
7
M
100-0001
1/19
MENU
SET
RESIZE
7 8
A
9
CANCEL A SELECT SET
• Sizes smaller than the recorded picture are displayed.
3
Press e to select [YES] and then
press [MENU/SET].
RESIZE
SAVE NEW PICTURES?
YES
NO
CANCEL A SELECT SET
MENU
SET
• If you select [NO], the screen returns to the one shown in step
2
4 Press [ ] twice to close the menu.
10
CANCEL A
SELECT
11
OK
SET/CANCEL
DISPLAY
DISPLAY
•
•
Set : Resize display A appears.
Cancel : Resize display A disappears.
Repeat these steps.
Each time you select a picture, the reduced size is shown on bottom left on the screen.
3 Press [MENU/SET].
4
Press e to select [YES] and then
press [MENU/SET].
5 Press [ ] to close the menu.
•
•
You may not be able to resize pictures you have taken using other equipment.
The picture becomes slightly rougher.
■
Multi setting (up to 50 pictures)
After the common operation
1
Select size with e/r and press
[MENU/SET].
REDUCED SIZE
DISPLAY
CANCEL
A SELECT SET
•
• e.g.) If you select h , the pictures of
and respectively.
Press [DISPLAY] to see the explanations.
Press again to return to the previous screen.
91
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 ) f
[ TRIMMING]
Enlarging a picture and trimming it
Use this function when you trim unnecessary parts of the recorded picture.
Select [
f
TRIMMING] from playback menu ( P86 ) .
1
Press w/q to select the picture
and then press [MENU/SET].
4 Press [MENU/SET].
5
Press e to select [YES] and then
press [MENU/SET].
TRIMMING
SAVE NEW PICTURES?
YES
NO
CANCEL
A
SELECT SET
10
M
100-0001
1/19
MENU
SET
• If you select [NO], the screen returns to the one shown in step
2.
6 Press [ ] twice to close the menu.
CANCEL
A
SELECT SET
•
–
–
The following pictures cannot be trimmed.
Motion pictures
Pictures imprinted with the text stamp
2 Enlarge or decrease the parts to be trimmed with the zoom lever.
•
•
•
If you trim a picture, the number of pixels may be fewer in the trimmed picture than in the original.
The picture quality of the trimmed picture may be deteriorated.
It may not be possible to trim pictures recorded with other equipment.
3
Press e/r/w/q to move the
position of the part to be trimmed.
92
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 ) i
[ASPECT CONV.]
Changing the aspect ratio of a
16:9 picture
You can convert pictures taken with a
[ j
] aspect ratio to a [ i
] or a [ h
] aspect ratio.
Select [i ASPECT CONV.] from
playback menu ( P86 ) .
1 Select [
i
] or [
h
] using e/r
and then press [MENU/SET].
PLAYBACK
ASPECT CONV.
ROTATE
ROTATE DISP.
FAVORITE
DPOF PRINT
SELECT SET
1/3
ON
OFF
•
–
–
The following pictures cannot be converted.
Motion pictures
Pictures imprinted with the text stamp
2
Press w/q to select a picture and
then press [MENU/SET].
ASPECT
CONV.
7.5
M
100-0001
1/19
CANCEL A SELECT SET
• If you select and set a picture with an aspect ratio other than [ j
], the message [CANNOT BE SET ON THIS
PICTURE] is displayed on the screen.
3
Press w/q to determine the
horizontal position and press
[MENU/SET] to set.
MENU
SET
CANCEL
A
ADJUST.
SET
• Use r/e to set the frame position for pictures rotated vertically.
4
Press e to select [YES] and then
press [MENU/SET].
ASPECT CONV.
SAVE NEW PICTURES?
YES
NO
CANCEL A SELECT SET
• If you select [NO], the screen returns to the one shown in step
3.
5 Press [ ] twice to close the menu.
•
•
•
After converting the aspect ratio, the picture size may become larger than that of the original picture.
Files that do not conform to the DCF standard cannot be converted.
You may not be able to convert pictures taken on other equipment.
93
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 ) b j
[ ROTATE] / [ ROTATE DISP.]
To display the picture rotated
■
Rotate display
(The picture is automatically rotated and displayed.)
Select [
j
ROTATE DISP.] from playback menu ( P86 ) .
This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90° increments.
■
Rotate
(The picture is rotated manually.)
•
Select [
b
ROTATE] from playback menu ( P86 ) .
When [ROTATE DISP.] is set to [OFF],
[ROTATE] function is disabled.
1
Press w/q to select the picture
and then press [MENU/SET].
1
Press r to select [ON] and then
press [MENU/SET].
PLAYBACK
ASPECT CONV.
ROTATE
ROTATE DISP.
FAVORITE
DPOF PRINT
SELECT SET
OFF
ON
10
M
100-0001
1/19
• When you select [OFF], the pictures are displayed without being rotated.
2 Press [MENU/SET] to close the menu.
MENU
SET
CANCEL A
• Motion pictures and protected pictures cannot be rotated.
2
Press e/r to select the direction
to rotate the picture and then press [MENU/SET].
CANCEL A SELECT SET a b
The picture rotates clockwise in increments of 90°.
The picture rotates counterclockwise in increments of 90°.
3 Press [ ] twice to close the menu.
•
•
•
•
•
If you take pictures when aiming the camera up or down, it may not be possible to display the pictures vertically.
The picture may be slightly blurred when the camera is connected to the TV with the AV cable (supplied) and played back vertically.
When you play the picture on a PC, you cannot play rotated pictures without an
OS or a software compatible with Exif.
Exif is the fi le format for still pictures, to which recording information and other data can be added, established by JEITA
[Japan Electronics and Information
Technology Industries Association].
Rotated pictures are displayed without being rotated when they are played back in multi playback.
You may not be able to rotate images shot on other equipment.
94
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
★
[ FAVORITE]
Setting your favorite pictures
•
You can do the following if a mark [
★
] has been added to pictures and they have
•
•
• been set as favorites.
Play back the pictures set as favorite.
( P84 )
Play back the pictures set as favorites only as a slide show. ( P81 )
Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT
★
])
( P38 )
Print only the pictures set as favorites.
( P104 )
Select [★ FAVORITE] from playback
menu ( P86 ) .
1
Press e/r to select [ON] and
then press [MENU/SET].
PLAYBACK
ASPECT CONV.
ROTATE
ROTATE DISP.
FAVORITE
DPOF PRINT
SELECT
OFF
ON
CANCEL
SET
MENU
SET
•
•
•
3
Press w/q to select the picture
then press r.
A
10
M
100-0001
1/19
Repeat the above procedure.
If r is pressed while the [
★
] favorites icon A is displayed, [
★
] is cleared, and the favorites setting is canceled.
You can place up to 999 pictures in your favorites list.
■
Canceling all favorites
1
Select [CANCEL] on the screen shown in step 1 and then press [MENU/SET].
2
Press e to select [YES] and then press
•
[MENU/SET].
3
Press [MENU/SET] to close the menu.
You cannot select [CANCEL] if none of the pictures have [
★
] displayed.
• You cannot set pictures as favorites if
[FAVORITE] is set to [OFF]. Also the favorites icon [
★
] will not appear when
[FAVORITE] is set to [OFF] even if it was previously set to [ON].
2 Press [MENU/SET] to close the menu.
•
•
•
• When printing pictures at a photo printing store, [ALL DELETE EXCEPT
★
] ( P38 ) is useful so only the pictures you want to be printed remain on the card.
Use [PHOTOfunSTUDIO-viewer-] (on the included CD-ROM) to change settings, check, or erase your pictures in your favorites list. (For details, refer to the separate operating instructions (PDF fi le) of the software.)
You may not be able to set pictures shot on other equipment as favorites.
The setting cannot be changed during favorite play [
★
].
95
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 ) l
[ DPOF PRINT]
Setting the picture to be printed and the number of prints
DPOF (Digital Print Order Format) is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the builtin memory, copy them to a card ( P99 ) and then set the DPOF setting.
For more information please visit: http://panasonic.jp/dc/dpof_110/white_ e.htm
Select [l DPOF PRINT] from playback
menu ( P86 ) .
■
Common operation
Press e/r to select [SINGLE],
[MULTI] or [CANCEL] and then press [MENU/SET].
PLAYBACK
ASPECT CONV.
ROTATE
ROTATE DISP.
FAVORITE
DPOF PRINT
SELECT
SINGLE
MULTI
CANCEL
SET
MENU
SET
• You cannot select [CANCEL] if there are no prints that have been set in the DPOF print settings.
■
Single setting
After the common operation
1
2
Select a picture with w/q and
press [MENU/SET].
Select the number of prints with
e
/r and press [MENU/SET].
1
DPOF PRINT
7 8
10
M
100-0001
1/19
COUNT
CANCEL A
1
DATE DISPLAY
•
• The number of prints icon [d1] appears.
The number of prints can be set from 0 to
999. When the number of prints is set to
“0”, DPOF print setting is canceled.
3 Press [ ] twice to close the menu.
■
Multi setting
After the common operation
1
Select a picture with e/r/w/q
and press [MENU/SET].
2 Select the number of prints with
e
/r and press [MENU/SET].
1
9
10
COUNT
CANCEL A
1
11
DATE DISPLAY
SET
•
•
•
Repeat step 1 and 2. (You cannot set all the pictures at one time.)
The number of prints icon [d1] appears.
The number of prints can be set from 0 to
999. When the number of prints is set to
“0”, DPOF print setting is canceled.
3 Press [ ] twice to close the menu.
96
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
■
To cancel all settings
After the common operation
• This function is canceled if you imprint the text stamp on the picture.
1
Press e to select [YES] and then
press [MENU/SET].
2
DPOF PRINT
CANCEL ALL DPOF
PRINT SETTINGS?
YES
NO
CANCEL A SELECT SET
•
Press [MENU/SET] to close the menu.
DPOF print settings on the built-in memory are canceled when a card is not inserted. DPOF print settings on the card are canceled when a card is inserted.
■
To print the date
You can set/cancel the printing with the recorded date with each press of the
[DISPLAY] button when setting the number of prints.
•
•
•
•
DPOF is an abbreviation of [Digital Print
Order Format]. This feature allows you to write print information to media and then use the information on a DPOF-compliant system.
DPOF print setting is a convenient function when you print pictures with printers supporting PictBridge. The date printing setting on the printer may take priority over the date printing setting on the camera. Check the date printing setting on the printer also.
Some DPOF information set by other equipment may not be effective. In such cases, delete all of the DPOF information and then set it again with this camera.
If the fi le is not based on the DCF standard, the DPOF print setting cannot be set.
1
10
M
100-0001
1/19
COUNT
CANCEL A
1
DATE
•
•
•
• The date print icon [L] appears.
When you go to a photo studio for digital printing, be sure to order the printing of the date if required.
The date may not be printed depending on photo studios or printers even if you set the date print. For further information, ask the photo studio for details or refer to the operating instructions of the printer.
This function is not available for images imprinted with the text stamp.
97
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 ) g
[ PROTECT]
Preventing accidental erasure of the picture
You can set protection for the pictures you do not want to delete to prevent them from accidental erasure.
Select [
g
PROTECT] from playback menu ( P86 ) .
■
Common operation
Press e/r to select [SINGLE],
[MULTI] or [CANCEL] and then press [MENU/SET].
PLAYBACK
PROTECT
COPY
SINGLE
MULTI
CANCEL
■
Multi setting/To cancel all settings
Perform the same operation as in [DPOF
PRINT] ( P96 to 97 ) .
•
•
•
•
The protect setting may not be effective in other equipment.
If you want to delete protected pictures, cancel the protect setting fi rst.
While this feature protects the pictures from accidental erasure, formatting the card will permanently delete all data.
Sliding the Write-Protect switch A of the
SD Memory Card or the SDHC Memory
Card to [LOCK] prevents pictures from deletion even if protection is not set.
A
SELECT SET
■
Single setting
After the common operation
1
Press w/q to select the picture
and then press [MENU/SET] to set/cancel.
10
M
100-0001
1/19
MENU
SET
EXIT A
MENU
SET
The protect icon [c] appears.
CANCEL The protect icon [c] disappears.
2 Press [ ] twice to close the menu.
•
–
–
The following functions cannot be used with protected pictures.
[TITLE EDIT]
[ROTATE]
98
VQT1L86
Advanced-Viewing
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. ( P86 )
[ COPY]
Copying the picture data
You can copy recorded picture data from the built-in memory to a card or vice versa.
Select [ COPY] from playback menu
( P86 ) .
1
Press e/r to select the copy
destination and then press
[MENU/SET].
•
•
•
The message [COPY THIS PICTURE TO
BUILT-IN MEMORY?] appears when you copy picture from the card to the built-in memory.
If you press [MENU/SET] while copying pictures from the built-in memory to the card, the copying will stop halfway.
Do not turn the camera off or do any other operations before copying is fi nished. The data on the built-in memory or the card may be damaged or lost.
PLAYBACK
PROTECT
COPY
SELECT SET
•
4 Press [ ] several times to close the menu.
If you copy picture data from the built-in memory to a card, the screen automatically returns to the playback screen when all the pictures are copied.
•
•
:
All the picture data in the built-in memory are copied onto the card at one time.
(Perform step 3)
:
One picture at a time is copied from the card to the built-in memory.
(Perform step 2)
(Only when is selected)
2
Press w/q to select the picture
and then press [MENU/SET].
3
Press e to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when pictures are copied from the built-in memory to a card.)
COPY
COPY PICTURES FROM
BUILT-IN MEMORY TO
MEMORY CARD?
YES
NO
CANCEL
A SELECT SET
MENU
SET
•
•
•
•
•
If you copy picture data from the built-in memory to a card which does not have suffi cient free space, the picture data will only be copied halfway. We recommend using a card which has more free space than the built-in memory.
In case of “ ”, you can copy an image fi le even if there is already a fi le in the destination that has the same name (same fi le and folder numbers) by making new folder. In case of “ if a picture exists with the same name
”, as the picture to be copied in the built-in memory, it is not copied.
It may take time to copy the picture data.
Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited with a PC.)
DPOF settings on the original picture data will not be copied. Set the DPOF settings again after copying is fi nished.
99
VQT1L86
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 TABLE OF CONTENTS
- 2 Before Use
- 2 Information for Your Safety
- 8 Preparation
- 8 Standard Accessories
- 9 Names of the Components
- 10 Quick Guide
- 11 About the Batteries
- 15 Inserting/Removing the Batteries/Card (Optional)
- 16 About the Built-in Memory/the Card
- 17 Setting Up the Clock
- 18 Basics of Modes and Menus
- 20 Basic settings (Setup menu)
- 26 LCD Monitor and Changesto the Display
- 27 Basic
- 27 Taking Pictures Easily ( Intelligent Auto Mode)
- 30 Taking Pictures in the Desired Setting( Program AE Mode)
- 33 Taking Pictures with the Zoom
- 37 Playing Back Pictures (Q Normal playback mode)
- 38 Deleting Pictures
- 40 Advanced-Shooting
- 40 About the LCD Monitor
- 43 Taking Pictures Using the Built-in Flash
- 46 Taking Close-up Pictures (AF w Macro Shooting)
- 47 Taking Pictures with the Self-timer
- 48 Compensating the Exposure
- 49 Auto Bracket Recording
- 50 Set Aperture/Shutter Speed/Exposure (A/S/M)
- 52 Taking Pictures of People, Scenery, etc. Expressively (Advanced Scene Mode)
- 55 Scene Mode
- 61 Motion Picture Mode
- 63 Vacation Date Recording
- 65 Displaying the Time at the Travel Destination
- 67 Using the [REC] Mode Menu
- 78 Advanced-Viewing
- 78 Displaying Multiple Screens (Multi Playback)
- 79 Displaying Pictures by Recording Date ( CALENDAR)
- 80 Using the Playback Zoom
- 81 Playing Back Pictures Automatically (a Slide Show)
- 83 Searching by Recording Information ( Category Playback)
- 84 Playing Back Your Favorite Pictures (★ Favorite Play)
- 85 Playing Back Motion Pictures
- 86 Using the [PLAYBACK] Mode Menu
- 100 Connecting to other equipment
- 100 Connecting to a PC
- 103 Connecting to a Pict-Bridgecompliant Printer
- 107 Playing Back Pictures with a TV Screen
- 108 Others
- 108 Screen Display
- 110 Cautions for Use
- 112 Message Display
- 114 Troubleshooting
- 120 Number of Recordable Pictures and Available Recording Time
- 124 Specifications
- 127 Digital Camera Accessory System
- 128 Digital Camera Accessory Order Form (For USA Customers)
- 129 Request for Service Notice (For USA Only)
- 130 Limited Warranty (For USA Only)
- 132 Customer Services Directory (For USA Only)
- 133 Précautions à prendre (Pour le Canada seulement)
- 135 Index