advertisement
02GBKV29CL10B.fm Page 19 Friday, January 17, 2003 6:17 PM
Using Optional Equipment
1
Connect your equipment to the designated TV socket, as indicated in the previous page.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the button repeatedly until the correct input symbol appears on the screen.
Symbol
1
2
S
2
Input Signals
• Audio / video input signal through the Scart connector C.
• RGB input signal through the Scart connector C. This symbol appears only if a RGB source has been connected.
• Audio / video input signal through the Scart connector D.
• S Video input signal through the Scart connector D.
3 • Video input signal through the phono socket A and Audio input signal
GB
4
Press button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select 3 input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual Sound” “A” on the sound menu screen (see page 11).
Additional Information
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Notice for Customers
- 3 Introduction
- 4 Safety Information
- 5 Overview of Remote Control Buttons
- 6 Overview of TV Buttons
- 7 Connecting the Aerial and VCR
- 7 Inserting Batteries into the Remote Control
- 8 Switching On the TV and Automatically Tuning
- 10 Introducing and Using the Menu System
- 10 Picture Adjustment
- 11 Sound Adjustment
- 12 Sleep Timer
- 12 Language/Country
- 12 Auto Tuning
- 12 Programme Sorting
- 13 Programme Labels
- 13 AV Preset
- 14 Manual Programme Preset
- 15 Noise Reduction
- 15 AV2 Output
- 16 RGB Centring
- 16 Picture Rotation
- 18 Connecting Optional Equipment
- 19 Using Optional Equipment
- 20 Specifications
- 21 Troubleshooting