SPECIFICATIONS. Xantech PA435X

Page 16 Model PA435X

SPECIFICATIONS

Number of channels

Power Output

Rated continuous power, each channel, all six channels simultaneously driven, 20 Hz to 20kHz, at rated THD

4

35 Watts at 8 Ohms

Power Output

Short term continuous, each channel, 2 channels driven,

1 kHz, at rated THD

55 Watts at 8 Ohms

80 Watts at 4 Ohms

Bridged Power Output

Short term continuous, one pair driven at 1 kHz, at rated THD

150 Watts at 8 Ohms

Rated THD

Damping Factor

at 50 Hz, half rated power

S/N Ratio

A-weighted, shorted inputs, ref to rated power

< 0.08%

> 100

> 100 dB

Frequency Response

at 1 Watt, ± 3dB

12 Hz to 55 kHz

Input Sensitivity

at rated power, stereo mode, input gain

Input Impedance

Max: 0.2 V

Default: 1.0 V

Minimum: 3V

Local Inputs: 22 kOhms

Common Audio Buss Inputs: 70kOhms

Power Source

Power Consumption

No signal: 14 Watts

4 Channels at 1/10 rated power: 105 Watts

4 Channels at rated power: 420 Watts

4 Channels Bridged at 465 Watts

Remote On/Off/Mute CI1 & CI2 Voltage/Current +5 V to +30 VDC (16 mA at +12 VDC)

Line Fuse Rating

120 VAC, 60 Hz

TMRA 35° Celsius (95° F). If this temperature is exceeded, you will need to provide additional ventilation to ensure proper operation.

240 VAC, 50 Hz (European version)

Dimensions

120V version: 6.25A Slow Blow 250 VAC

240V version: 3.15A Time-Lag 250 VAC

17” W x 4” H x 11.5” D

(432 mm W x 102 mm H x 293 mm D)

Weight

20.4 lbs (9.3 Kg)

© 2003 Xantech Corporation

Model PA435X Page 17

© 2003 Xantech Corporation

Page 18 Model PA435X

© 2003 Xantech Corporation

Model PA435X Page 19

© 2003 Xantech Corporation

Page 20 Model PA435X

XANTECH CORPORATION

12950 Bradley Avenue, Sylmar CA 91342-3829 phone 818.362.0353 • fax 818.362.9506 www.xantech.com

Part No. 08901190 Rev A 01-31-2003

© 2003 Xantech Corporation