x z
( )
Using the Remote Control Unit (optional)
You can take pictures using the wireless remote control unit
(optional).
z
Set the mode dial to
x
Press the button twice.
The self-timer lamp will blink and the
or .
camera is ready to take pictures using the remote control unit.
If you press the Zoom button on the remote control unit, the zoom will switch from [Tele] to [Normal] to
[Wide].
c
Press the shutter release button on the remote control unit.
The self-timer lamp will blink rapidly and the picture will be taken after approximately three seconds.
Playing Back Images p.53
memo
• The buttons on the camera can be used in the same way.
• Please ensure that the remote control is no more than 5 meters apart from the front of the camera.
37
