Selecting Audio Language/Sound Included on the Disc. ONKYO DR 90

Selecting Audio Language/Sound

Included on the Disc

Good morning!

Bon jour!

¡Buenos días!

MENU

2

1,2

AUDIO

CLEAR

SENDING/

LEARNED

LEVEL SETUP

DVD RECEIVER TV

POWER

ON STANDBY

SLEEP

DIMMER DISPLAY

TITLE

ENTER

MENU SURROUND MODE

INPUT SELECTOR

DVD TV

RETURN SETUP VIDEO 1 TAPE

CH SEL

1

TEST

TONE

4

2

LEVEL

5

7 8

3

VIDEO 2 TUNER

AUDIO SUBTITLE

6

ANGLE ZOOM

9

SEARCH CLEAR

OPEN/

CLOSE

+10

FR

0

PAUSE FF POWER MUTING

DOWN PLAY UP CHANNEL

TV/ VCR

RANDOM STOP SLOW

TUNER

PRESET

REPEAT A-B MEMORY

VOLUME

You can select a preferred audio language and sound system.

DVD

Selecting a Playback Audio Setting

You can select a set of preferred audio language and sound system from those included on the DVD video.

This function enables you to temporarily change the audio language which has been selected as the automatic setting in the setting menu (see pages 44 and 47), and select the sound system if the DVD video is recorded in more than one sound format.

1

AUDIO

Press AUDIO during playback.

The current audio setting is displayed for about 3 seconds.

Audio language

Sound system

Audio channel

Audio: 1 ENG PCM 2CH

Audio OUT Select : Bitstream

See next page.

REMOTE CONTROLLER

RC-399M

About recording systems

This DVD Receiver uses the Dolby Digital ( 6CH), DTS, and PCM systems and cannot play DVD videos recorded in any other sound system.

Notes

• Some discs allow you to change audio selections only by using the disc menu. If this is the case, press MENU and choose the appropriate language from the selections in the disc menu.

• Some discs may have only one set of audio language and sound recording system and you cannot make this selection.

• The “Audio Language” setting in the setting menu (see page 47) is for automatic selection of the audio language among those included on the DVD video when the DVD is inserted. Therefore, the selection in this section will not change the setting of “Audio Language” in the setting menu.

• When you turn on the DVD Receiver or replace a disc, the DVD

Receiver returns to the automatic setting in the setting menu (see page 47).

2

AUDIO

The abbreviation of the language appears.

Refer to the list of languages on page 57.

Press AUDIO or while the audio setting is displayed on the TV screen.

Each time you press AUDIO or , the set of language and audio recording system changes.

e.g.

A u d i o : 1 ENG 6CH

ENTER

A u d i o :

2

ENG PCM 2CH

A u d i o : 3 FRE 6CH

: Cycles backwards

Note

Dolby Digital 5.1 Channel sound may be displayed as “ 6CH.”

VCD

Selecting Sound Channels of VIDEO

CDs

A VIDEO CD may have left and right sound channels and contain sounds or languages on each channel. You can switch these two channels to hear a preferred sound or language.

During playback, press AUDIO repeatedly to select the sound cannel.

AUDIO

→

L. R

L

Both the left and right channels are heard.

The left channel is heard.

R

The right channel is heard.

To turn off the audio setting display

CLEAR

Press CLEAR.

39