User Manual EN

EN

When the oven is working...

Interrupting a cooking cycle

You can stop the cooking process at any time by pressing the Stop key once or by opening the oven door.

In both cases:



Microwave emission is stopped immediately.



The grill is de-activated but is still very hot.

Danger of burning!



The timer stops and the display shows the remaining amount of operating time.

If you wish, at this time you can:

1. Turn or stir the food to ensure it will be evenly cooked.

2. Change the process parameters.

3. Cancel the process by pressing the Stop key for 3 seconds.

To restart the process, close the door and press the Start key

Altering parameters

The operating parameters (time, weight, power, etc.) can be altered when the oven is operating or when the cooking process has been interrupted by proceeding as follows:

1. To alter the time, turn the rotating knob. The new time defined is immediately valid.

2. To alter the power, press the OK key. The respective light starts to flash. Alter the parameter by turning the Rotating Knob and confirm by pressing the OK key again.

Cancelling a cooking cycle

If you wish to cancel the cooking process, press the Stop key twice.

You will then hear a beep and the time will appear on the display.

End of a cooking cycle

At the end of the process you will hear three beeps and the display will show the word

“End”.

The beeps are repeated every 30 seconds until the door is opened or the Stop key is pressed.

13