3.2.1 Source tree
In this area, all existing sources, cameras and images are displayed in a tree list. The cameras are displayed under the name of the respective interface (hardware) and producer.
You can open the selected image or camera by double clicking.
This area can be expanded and collapsed.
After selecting a camera from the list by double clicking, a new camera tab with the Cam-
era View
(see chapter 3.5) will be opened.
6
Figure 2 ►
Source tabs with located TXG Camera and one snapshot.
This area shows the following icons with functions as described below:
Icon Description
Start search for available cameras.
The cameras recognized are listed under the respective interface.
Figure 3 ►
Source tab icons and their functions
You can use this function to load images from the PC.
Remove the selected image. Cameras cannot be deleted.
Notice
Selected images are removed only from the GUI and remain in their storage location.
You can use this function to set the width of the area.
At a certain point, the area closes completely.
Here, several options for the GigE interface in terms of persistent IP
Options, Force IP Options and more, can be adjusted.
Notice
The IP Config-Tool is a separate program and not part of the Baumer GAPI Camera Explorer.
It is available only on Microsoft
®
Windows
®
.
