- No category
advertisement
H
Bakery Industry
Pastry Line Conveyor Control
The Need
The system includes several conveyors for a toaster pastry line, in which on-the-spot decisions on when to transfer pastries to the packaging machine conveyor are made. Decisions are based on the count of pastries, which occurs at high speed, and the downstream packaging machinery loading.
The Solution
GE Fanuc supplied ten Series 90 Micro PLCs and a Series 90-70 PLC. The Micro PLCs are distributed along the conveyor belt at each packaging point. The high-speed counting ability of the
Series 90 Micro and its local logic allow it to make the necessary on-the-fly decisions for conveyor control.
System parameters are transmitted using SNP to the Series 90-70 PLC at the heart of the system.
The Series 90-70 PLC monitors the overall performance of the system.
The Benefits
The Series 90 Micro PLC affords the customer the advantage of a cost-effective compact package that provides high-speed counting and local logic.
Series 90 Micro PLCs control individual sections of the conveyor as the Series 90-70 PLC controls the overall system.
GFK-1065F Appendix H Case Histories H-3
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 20 What You Will Need
- 21 Getting Started
- 23 Frequently Asked Questions
- 25 Programming Examples
- 28 Compatibility
- 29 Functional Description
- 29 CPU Board
- 32 I/O Board
- 34 Input/Output Connectors
- 38 Status Indicators
- 38 Power Supply Board
- 39 Configuration and Programming
- 39 Fault Reporting
- 40 Specifications
- 46 Minimum Hardware Requirements
- 46 Unpacking
- 47 Installation Requirements
- 47 Installation
- 49 Mounting a Unit on a DIN Rail
- 49 Removing a Unit From a DIN Rail
- 50 Grounding Procedures
- 50 I/O Installation and Wiring
- 51 Powerup Self-test
- 53 Connecting a Programming Device
- 53 Connecting the Hand-Held Programmer
- 55 Connections for Using Logicmaster 90-30/20/Micro Software
- 57 Multidrop Serial Data Configuration to Series 90 PLCs
- 58 Replacing Fuses (AC In/AC Out Models Only)
- 61 Expansion Unit Installation
- 61 Micro Expansion Unit
- 63 Physical Order of Different Types of Expansion Units
- 65 Agency Approvals, Standards, and General Specifications for Series 90 Micro PLC
- 67 CE Mark Installation Requirements
- 69 Positive and Negative Logic Definitions
- 71 Interface Specifications
- 71 Model Summaries
- 75 Positive/Negative Logic Inputs (IC693UDR001/002/005/010, UDD00104, UAL006, UEX011)
- 76 Potentiometer Analog Inputs (All Models)
- 77 High Speed Counter Inputs (IC693UDR001/002/005/010, UAL006)
- 78 Relay Outputs (IC693UDR001/002/005/010, UAL006, UEX011)
- 80 High Speed Counter Outputs (IC693UDR001/002/005, IC693UAL006)
- 80 DC Outputs (IC693UDR005/010 and IC693UAL006)
- 80 Transistor Outputs 24VDC (IC693UDD104)
- 82 24 VDC Output Power Supply (IC693UDR001/002/005/010, IC693UDD104, IC693UAL006, IC693UEX011)
- 83 Analog Inputs (IC693UAL006)
- 84 Analog Output (IC693UAL006)
- 85 AC Inputs (IC693UAA003/007)
- 86 AC Outputs (IC693UAA003/007)
- 88 Field Wiring Installation
- 88 Wire Connection Information
- 88 Power Supply and I/O Connections
- 89 General Wiring Procedures
- 94 Micro PLC Parameters
- 97 Configuration and Programming Using the HHP
- 97 HHP Configuration Screens
- 100 Storing the User Program Using the HHP
- 101 Storing Configuration and Register Data Using the HHP
- 101 Other HHP Functions
- 103 Configuration and Programming Using Logicmaster 90 Software
- 105 Configuring Serial Ports
- 106 Logicmaster 90 Configuration of Serial Port 2
- 108 Configuring Serial Ports Using the COMM_REQ Function
- 113 Programmer Attach Feature (14-Point Micro PLCs)
- 114 Configuring ASCII Output
- 114 Autodial Command Block
- 116 Put String Command Block
- 118 Status Word for Custom Protocol COMM_REQs
- 119 Configuring Expansion Units (23 and 28-Point Micro PLCs)
- 120 Logicmaster Screens for Configuring Expansion Units
- 124 HHP Screens for Configuring Expansion Units
- 128 Configuring Q1 for PWM or Pulse Output (IC693UDR005/010 and IC693UAL006)
- 131 Pulse Train Output
- 132 Configuring of Outputs Q1 to Q5 (IC693UDD104)
- 133 PWM Output (IC693UDD104)
- 139 High Speed Counter/CPU Interface
- 139 Registers
- 140 Data Automatically Sent by the HSC
- 141 High Speed Counter Status Codes
- 142 Data Automatically Sent to the HSC (%Q)
- 143 Output Failure Mode
- 144 Type A Counter Operation
- 144 Type A Counter Overview
- 145 Type A Operating Parameters
- 150 Type B Counter Operation
- 150 A-Quad-B Counting
- 151 Type B Counter Overview
- 152 Type B Operating Parameters
- 156 Configuration
- 160 Logicmaster 90 Software
- 163 Hand-Held Programmer
- 170 COMM_REQ Function
- 176 Application Examples-RPM Indicator
- 177 Application Example - Input Capture
- 179 Overview
- 183 Logicmaster 90 Screens
- 184 HHP Screens
- 186 Calibration
- 186 Default Gains and Offsets
- 187 Calibration Procedure
- 192 PLC Sweep Summary
- 194 Sweep Time Contribution
- 196 Deviations from the Standard Program Sweep
- 197 Software Structure
- 197 Program Structure
- 197 Data Structure
- 199 Powerup and Power-Down Sequence
- 199 Powerup Sequence
- 199 Power-Down Conditions
- 200 Power Cycle
- 202 Clocks and Timers
- 202 Elapsed Time Clock
- 202 Time of Day Clock (23 and 28-Point Micro PLCs)
- 202 Watchdog Timer
- 202 Constant Sweep Timer
- 203 Timer Function Blocks
- 203 Timed Contacts
- 204 System Security
- 204 Overview
- 204 Password Protection
- 206 I/O System for the Series 90 Micro PLC
- 206 I/O Scan Sequence
- 206 Default Conditions for Micro PLC Output Points
- 207 Software Filters
- 209 Diagnostic Data
- 209 Flash Memory
- 211 Powerup Diagnostics
- 212 Faults and Fault Handling
- 212 Fault Handling
- 212 Classes of Faults
- 213 System Response to Faults
- 215 Fault Summary References
- 218 Special Operational Notes
- 218 Technical Help
- 224 User References
- 225 References for Fault Reporting
- 226 Fixed I/O Map Locations
- 236 RS-422 Interface
- 237 Cable and Connector Specifications
- 238 Port Configurations
- 238 Series 90 PLC Serial Port
- 240 Workmaster Serial Port
- 241 IBM-AT Serial Port
- 241 RS-232/RS-485 Converter
- 242 Serial Cable Diagrams
- 242 Point-to-Point Connections
- 247 Multidrop Connections
- 262 RS-422/RS-485 to RS-232 Converter
- 262 Features
- 262 Functions
- 262 Location in System
- 263 Installation
- 264 Cable Description
- 265 Pin Assignments
- 266 Logic Diagram
- 267 Jumper Configuration
- 268 Specifications
- 269 Miniconverter Kit
- 269 Description of Miniconverter
- 271 System Configurations
- 273 Isolated Repeater/Converter
- 273 Description of the Isolated Repeater/Converter
- 280 Cable Diagrams
- 285 IC693CBL303: Hand-Hand Programmer Cable
- 287 IC690CBL701: Workmaster (PC-XT) to RS-485/RS-232 Converter Cable
- 288 IC690CBL702: PC-AT to RS-485/RS-232 Converter Cable
- 289 IC647CBL704: Workstation Interface to SNP Port Cable
- 290 IC690CBL705: Workmaster II (PS/2) to RS-485/RS-232 Converter Cable
- 291 Wire Cable Diagrams
- 292 Series 90 Micro PLC Analog I/O Through CALEX Signal Conditioners
- 292 Application
- 294 Solution
- 295 Benefits
- 296 Sample Ladder Logic Diagram
- 299 Automotive Industry
- 299 Fluid Pumping Control
- 300 Bakery Industry
- 301 Chemical Industry
- 302 Commercial Agriculture Industry
- 303 Commercial Laundry Industry
- 304 Construction Equipment Industry
- 305 Entertainment Industry
- 306 General Purpose Machinery
- 307 Lumber Industry
- 308 Material Handling Industry
- 309 Paper Industry
- 309 Petroleum Industry
- 310 Packaging Industry
- 310 Shrink Wrapping Machine
- 311 Videocassette Packaging
- 312 Plastics Industry
- 312 Injection Molding
- 313 Plastic Parts Manufacturing
- 314 Public Emergency Services Industry
- 315 Sports Equipment Industry
- 316 Tubing Manufacturing Industry
- 317 Water and Wastewater Industry
- 317 Flood Control Monitoring
- 318 Sewage/Wastewater Lift Stations
- 319 Wastewater Treatment
- 320 Water Flow Control
- 321 Wire Manufacturing Industry
- 322 Woodworking Industry