Control & Indicating Equipment. Panasonic EBL 128

Panasonic Eco Solutions Nordic AB

MEW01623 Rev: -

4

EBL128 Operating Instructions V2.0.x

Control & Indicating Equipment

Figure 1. The EBL128 Control & Indicating Equipment (4550).

Depending on country, convention, configuration, etc. the look, language and functions might vary. Figure 1 shows an EBL128 with an English front. EBL128 is housed in a grey metal cabinet. The door has a Plexiglas ahead of the front, see Figure 1. A key is required to open the door to get full access to the push buttons on the front, i.e. the Fire Brigade Panel (FBP) and the Control Panel (CP).

FBP

CP

Figure 2. The EBL128 front. The look might vary depending on the country (language) configuration, etc. (e.g. English texts as in the figure). See also chapter "LED indicators and push buttons", page 16.

14

Panasonic Eco Solutions Nordic AB

MEW01623 Rev: - EBL128 Operating Instructions V2.0.x

The FBP is used by the fire brigade personnel to see which alarm point / zone having activated the fire alarm(s), silence alarm devices, reset alarms, etc. In the display (LCD, 2x40 alphanumeric characters), the information displayed on the first row is depending on how many alarm points / zones having activated fire alarm, convention and language.

On the second row is, for the activated alarm point / zone, an alarm text shown, if programmed. See chapter "Fire alarm", page 42.

Required fire brigade personnel manoeuvres are performed via the

FBP in EBL128 or via an external FBP 1826 / 1828.

Instead of external FBPs 1826 / 1828, the German Fire Brigade

Control Panels (Feuerwehr-Bedienfeld) FBF 2003 and/or German

Fire Brigade Indicator Panels (Feuerwehr-Anzeigetableau) FAT 2002 can be used.

The CP is used by the EBL128 owner, service personnel, etc. to

"communicate" with EBL128, e.g. for monthly tests, disablements commissioning, maintenance and service. Access codes for different users and access levels are required. A keypad is used to get access to the menu tree, i.e. main and sub menus for data input / output, manoeuvres, etc. The CP also holds several system status LEDs.

15