Elma Operating Instructions

Filling of the unit

5.2

Pump guarantees optimum filling level

NOTE

Automatic filling with pump (optional)

The pump automatically fills the tank with the optimum quantity of water. There are no idle phases due to required cooling-down phases as when filled by hand.

As soon as the water level in the tank goes below a certain level, the pump automatically refills the tank up to the optimum level.

During the filling process the LED “pump min“ is active

(illustration 3.10.). As soon as the maximum filling level in the tank is reached, the LED “pump max.“ (illustration 3.10.) turns on.

Risk of damage caused by water in case of loosened water tube!

Shut down the water supply after operation or when the unit is unattended.

NOTE

NOTE

Risk of damage to the pump due to running dry. The water supply valve must remain open during operation.

Risk of damage to the pump!

Connect the pump to the city water supply or water from a softening water device only.

The conductance of softened water must have a minimum value of 15 μSiemens.

© Elma GmbH & Co KG BA/Elmasteam_RD/GB/03.2009

19