advertisement
Before fi rst use
ATTENTION!
❐
The appliance can be affl icted by product residues. Clean it thoroughly before fi rst use.
❐
Keep children and animals away from the packaging. There is, among other things, a danger of suffocation!
1. Unpack all parts and make sure that the product contents are complete (see chapter
“Product contents and device overview”) and check for any damages from transport.
If you identify damages to the components, do not use them (!), instead contact our customer service centre.
2. Pull any foils and stickers off of the device.
3. Clean the kettle with a damp, soft cloth. To clean the kettle you can use a small amount of mild detergent if needed and rinse the device off with clean, warm water afterwards. Dry it off with a soft cloth.
4. The cable is wind up on the bottom of the base. Unwind the cord completely.
5. Place the base on a dry, water and heat-resistant, even surface with suffi cient space to fl ammable objects. Please ensure that the device is not accessible to children.
6. Insert the mains plug in a properly installed and grounded 220 – 240 V socket with earthing contacts.
7. Fill the kettle with tap water up to the MAX mark and let it boil up (see chapter “Use”).
Pour the water away afterwards. Repeat this process twice.
The kettle is now ready for use!
Use
ATTENTION!
❐
Scalding hazard! Caution: Risk of emitted steam! Be careful when pouring out hot water. Avoid coming into contact with steam emitted from the kettle. Especially, keep hands and head away from the spout/lid.
❐
Scalding hazard! When the device is in use or shortly afterwards, avoid any contact with the hot surfaces of the device (kettle and lid)!
❐
Allow the device to cool down before using the device again.
❐
Do not add more water than up to the MAX mark as water may spray out of the spout during the boiling process otherwise.
❐
Fill the kettle at least up to the MIN mark with water! The device switches off automatically when there is not suffi cient watter in the kettle.
❐
Each time before boiling, ensure that the lid is properly closed and that the On/Off switch is not jammed. The device only switches off automatically, when the lid is closed and the On/Off switch is not jammed.
14
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Bedeutung der Symbole in dieser Anleitung
- 3 Bestimmungsgemäßer Gebrauch
- 3 Sicherheitshinweise
- 3 Verletzungsgefahren
- 3 Brandgefahr
- 4 Für Ihre Gesundheit
- 4 Das richtige Aufstellen und Anschließen
- 4 Der richtige Gebrauch
- 6 Lieferumfang und Geräteübersicht
- 6 Vor dem ersten Gebrauch
- 7 Benutzung
- 8 Reinigung und Pfl ege
- 8 Fehlerbehebung
- 9 Technische Daten
- 9 Entsorgung
- 10 Meaning of symbols in these instructions
- 11 Safety instructions
- 11 Proper use
- 11 Risks of injury
- 11 Fire hazard
- 11 For your health
- 12 Setting up and connecting the device properly
- 12 Proper use
- 13 Product contents and device overview
- 14 Before fi rst use
- 15 Cleaning and care
- 16 Troubleshooting
- 16 Technical data
- 16 Disposal
- 18 Signifi cation des symboles contenus dans ce mode d’emploi
- 19 Utilisation adéquate
- 19 Consignes de sécurité
- 19 Risques de blessure
- 19 Risque d'incendie
- 20 Pour votre santé
- 20 Mise en place et branchement corrects
- 20 Le bon usage
- 22 Étendue de la livraison et vue générale de l’appareil
- 22 Avant la première utilisation
- 23 Utilisation
- 24 Nettoyage et entretien
- 24 Suppression des défauts
- 25 Données techniques
- 25 Élimination
- 26 Betekenis van de symbolen in deze handleiding
- 27 Reglementair gebruik
- 27 Veiligheidsinstructies
- 27 Verwondingsgevaren
- 27 Brandgevaar
- 27 Voor uw gezondheid
- 28 De juiste opstelling en aansluiting
- 28 Het juiste gebruik
- 30 Leveringspakket en overzicht van het apparaat
- 30 Voor het eerste gebruik
- 31 Gebruik
- 32 Reiniging en onderhoud
- 32 Oplossing van fouten
- 33 Technische gegevens
- 33 Verwijdering