Programming at a glance. Honeywell FOCUSPRO TH6320R

Operating Manual

About your new thermostat

Your new thermostat is pre-programmed and ready to go. All you have to do is set the time and day. Then check the settings below and change if needed:

1. Set time and day (required for proper operation) ...................See page 5

2. Select fan setting (Auto/On)......................................................See page 6

3. Select system setting (Heat/Cool) ............................................See page 7

4. Program schedules: Preset to energy-saving levels while you’re at work or asleep (assumes you wake at 6 am, leave at 8 am, return at 6 pm and go to bed at 10 pm) .........................................................See pages 8-9

CAUTION: EQUIPMENT DAMAGE HAZARD. You can override the program schedule at any time, and manually adjust the temperature (see pages 10-11).

69-2093EFS—07 2