Location. Fantech AEV Series

AEV installation

• Install the unit close to the outside wall on which the supply and exhaust hoods will be mounted.

• Have a nearby power supply 120 Volts, 60 Hz.

• Have the possibility of mounting the unit to supporting beams.

• Mount the unit as level as possible.

• Have a certain amount of heat around the unit

(attic installation is not recommended).

• Minimize any noise level that would be created by the unit in the living area.

• Have access for future maintenance.

Location

The Air Exchanger must be located where it will be possible to conveniently service the unit. Typically the AEV would be located in an area close to the outside wall where the weatherhoods will be mounted. If a basement area is not convenient or does not exist, a utility or laundry room may be used.

Connecting appliances to the AEV is not recommended. These include:

• Clothes dryer

• Range top

• Stovetop fan

• Central vacuum system

These appliances may cause lint, dust or grease to collect in the HRV, damaging the unit.

Connecting any of these types of appliances to the AEV will void your warranty.

Mounting

1. Although we recommend installing the unit as shown, the flexibility offered by our centrifugal external rotor motor allows for the unit to be installed in any position.

2. Use screws and mounting bracket supplied with the unit.

9 fantech