10. Service Mode
10.13.7
8 Color Solid Pattern
Functions
Use
Pattern
Field Service Ver. 1.0 Mar. 2005
• To produce an 8-color solid pattern.
• Used for checking color reproducibility and uneven density of each color.
SINGLE
HYPER
Gradation
Density: 255
Setting/
Procedure
4036fs3047c0
• # of Print (“1” to 999)
• Select “SINGLE” (single copy) or MULTI (multi copy).
• Select FEET or “HYPER.”
• Select “Gradation” or Resolution if HYPER has been selected.
• Type the density level (0 to “255”).
10.13.8
LPH Pattern
Functions
Use
Pattern
• To produce an LPH pattern.
• Used for LPH chip-to-chip correction
SINGLE
HYPER
Gradation
Border: OFF
Setting/
Procedure
4036fs3048c0
• # of Print (“1” to 999)
• Select “SINGLE” (single copy) or MULTI (multi copy).
• Select FEET or “HYPER.”
• Select “Gradation” or Resolution if HYPER has been selected.
• Select to turn ON or “OFF” the Border Line.
10.13.9
Running Mode
Functions
Use
Setting/
Procedure
• To test the printing operation in Running Mode.
• Use to check the printing operation in Running Mode from each paper source.
1. Call the Service Mode to the screen.
2. Touch these keys in this order: “Test Mode”
→ “Running Mode.”
3. Select the paper size (Tray 1, Bypass only).
4. Select the paper type.
5. Press the Start key to start the Running Mode.
6. Pressing the Stop key will stop operation.
290
