advertisement
▼
Scroll to page 2
of
110
Gear engagement rods
The robot uses four rods ending in four forks, which are engaged in the sliding sleeves for engaging the gears.
Fig. 36
The rods are positioned in pairs. One pair engages the gear on the upper layshaft, the other pair those on the lower layshaft. The rods are anchored to the gearbox casing by means of two hollow steel shafts, which also allow sliding to move the sliding sleeve. The rods are shown below in gear engagement order:
Fig. 37
- 30 - Alfa TCT
advertisement
Key Features
- Three-shaft transmission
- Maximum torque of 350 Nm
- Two dry clutches
- Six synchronised gears
- Dedicated TCU
- Electrohydraulic unit
Related manuals
Frequently Answers and Questions
What is the maximum torque that the Alfa TCT transmission can transmit?
The Alfa TCT transmission can transmit a maximum torque of 350 Nm.
How many gears does the Alfa TCT transmission have?
The Alfa TCT transmission has six synchronised gears.
What type of clutches are used in the Alfa TCT transmission?
The Alfa TCT transmission uses two dry clutches.
What controls the Alfa TCT transmission?
The Alfa TCT transmission is controlled by an electrohydraulic unit and an electronic control unit (TCU).
advertisement