Head-End Station STC 160 Head-End Digital

5.4 p rogr a mming the

dvb-s2-Qam module

—> Pressing the button for longer than 2 seconds cancels the programming procedure. This takes you back to the program item "Se-

lecting the module/channel strip

" from any menu. Any entries that have not been saved are reset to the previous settings.

—> Entries in the menus can be saved by pressing the key. You are taken back to the "Selecting the module/channel strip" menu item.

• Switch on the head-end station.

—> The display shows "SETUP BE160" and the software version of the head-end station (e.g. V 10).

—> In the "SETUP" menu, the output level of the output collector can be adjusted (see STC 160 assembly instructions).

SETUP

Ein/On

BE160

V 10 s eleCting the module

/

Channel strip

• If necessary, press repeatedly to select the particular module (Bx …) or channel strip "A" or "B" to be programmed.

Bx 1A

850.0 MHz A

TPS

V 15

/

Bx 1B

858.0 MHz A

TWIN-SAT

TPS

V 15

- 19 - HDMH 660 CI TPS