Quick Start. Panasonic NVGS400GN, NV-GS400GN

400GN.book 22 ページ ２００４年６月３日　木曜日　午後１時４９分

Recording Mode

≥The Shutter Chance Mark appears even when the [PHOTO SHOT] Button is not pressed.

Check it for your reference.

≥Even if the [PHOTO SHOT] Button is pressed halfway, the Shutter Chance Mark does not appear in Manual Focus Mode.

2

Keep pressing the [PHOTO SHOT] Button

(52)

.

PHOTO

SHOT

(52)

Selecting the Size of Photoshot Images

1

Tape Recording Mode:

Set [TAPE RECORDING MENU] >> [CARD]

>> [PICTURE SIZE] >> [1280

k960] or

[640

k480].

Card Recording Mode:

Set [CARD RECORDING MENU] >> [CARD]

>> [PICTURE SIZE] >> [2288

k1728],

[1600

k1200], [1280k960] or [640k480].

(16)

MENU

STILL

ENTER

FADE

Selecting the Quality of Photoshot Images

1

Set [TAPE RECORDING MENU],

[TAPE PLAYBACK MENU] or

[CARD RECORDING MENU] >> [CARD] >>

[PICT QUALITY] >> a desired image quality.

≥You can also activate Continuous Photoshot

Function after pressing the [PHOTO SHOT]

Button halfway. In this case, if the Image

Stabilizer Function (

-24-

) is set to [ON], the

Image Stabilizer Function works more effective.

≥When [ON] is selected, the still pictures can be recorded in approximately 0.7 second intervals until the [PHOTO SHOT] Button is released or

10 pictures are recorded. (You cannot use the

Continuous Photoshot function if the shutter speed is set to 1/2, 1/3, 1/6 or 1/12.)

≥For other notes concerning this item, see

-54-

.

Quick Start

By pressing the [QUICK START] Button (45) , and the Movie Camera will be ready for recording in approximately 1.7 seconds after the Movie

Camera is turned on.

1

Press the [QUICK START] Button

(45)

.

≥The Quick Start Recording Lamp lights up.

STILL

ENTER

FADE

(16)

MENU

ª Continuous Photoshot

The still pictures can be recorded on a Card at a regular intervals.

≥Available only with [640k480] picture size.

1

Set [CARD RECORDING MENU] >> [CARD]

>> [BURST MODE] >> [ON].

(45)

QUICK

START

2

Set the [OFF/ON] Switch

(48)

to [OFF].

≥The Quick Start Recording Lamp remains lit.

(48)

OF

F

ON

STILL

ENTER

FADE

(16)

MENU

≥The [

] Indication appears.

3

Set the [OFF/ON] Switch

(48)

to [ON].

≥The Movie Camera will be ready for recording in approximately 1.7 seconds.

To Cancel the Quick Start

Keep the [QUICK START] Button pressed for approximately 2 seconds and make sure the

Quick Start Recording Lamp is not lit.

≥For other notes concerning this item, see

-55-

.

22