LED KEYPAD

Fault Condition

A Fault Condition could, if unheeded, potentially render your system inactive. If such a fault should occur it will be indicated by a flashing green “READY” light and an audible warning tone at the keypad. To identify the nature of the Fault Condition, activate the following sequence:

This will also silence the audible warning. Fault conditions will show by flashing the appropriate zone LED (see following chart).

Discuss with your installer what action to take if a problem should occur. If a trouble condition occurs on a fire zone, call your installer for service. An important part of your system is out of order.

The Table below shows the LCD keypad messages and the LED

Zone numbers 1-3 for each of the Fault Conditions:

Green READY LED Flashing Indicates That a Trouble Condition Exists

LED Indication

Zone #1 AC

Problem

Indicates the AC power to your alarm system has been disrupted.

Zone #2 BATT

Zone #3 FC

Indicates a low battery condition

Indicates a communication failure with Central

Station.

The Zone in Trouble will show constantly if the Trouble condition is Fire or Burglary. The keypad will display the zone in Trouble.

IT IS IMPORTANT FOR YOUR SAFETY THAT YOU HAVE YOUR

INSTALLER CORRECT ANY FAULTS AS SOON AS POSSIBLE.

12