DJ Lase RGB Pro Advanced 1000 showlaser user manual

Operating mode DMX

Operating

In this mode the device is controlled via a DMX controller.

Press [MENU] to open the main menu.

Press repeatedly [MENU] or [UP] and [DOWN] to select the menu item ‘dMX’ and confirm with

[ENTER].

The display shows ‘d001’ , the unit is now controlled via DMX channel 1. When the display flashes, no controller is connected.

To return to the main menu without making changes, press [MENU].

7.5 Setting DMX channel

Switch to the DMX mode. The display shows ‘d001’ .

Press [ENTER]. The display shows ‘001’ . Use [UP] and [DOWN] to set the desired DMX address in a range from ‘001’ … ‘492’ and confirm with [ENTER].

To return to the parent menu without making changes, press [MENU.]

DJ Lase RGB Pro Advanced 1000

43