UM1562 Using IAR Embedded Workbench® for ARM
4.
If your project is successfully compiled, the following window in
Figure 4
is displayed.
Figure 4.
EWARM project successfully compiled
5.2 Debugging and running your EWARM project
In the IAR Embedded Workbench IDE, from the Project menu, select Download and
Debug or, alternatively, click the Download and Debug button in the toolbar, to program the
Flash memory and begin debugging.
Figure 5.
Download and Debug button
The debugger in the IAR Embedded Workbench can be used to debug source code at C and assembly levels, set breakpoints, monitor individual variables and watch events during the code execution.
Doc ID 023558 Rev 1 15/48
Using IAR Embedded Workbench® for ARM
Figure 6.
IAR Embedded Workbench debugger screen
UM1562
To run your application, from the Debug menu, select Go. Alternatively, click the Go button in the toolbar to run your application.
Figure 7.
Go button
16/48 Doc ID 023558 Rev 1