- Computers & electronics
- Computer components
- System components
- Server/workstation motherboards
- User manual
![](http://s1.manualzz.com/store/data/006635330_1-4256695c01016de8822a3b5f7bd89f4d-128x128.png)
advertisement
![Z97M WS C226M WS | Manualzz Z97M WS C226M WS | Manualzz](http://s1.manualzz.com/store/data/006635330_1-4256695c01016de8822a3b5f7bd89f4d-360x466.png)
16
Z97M WS / C226M WS
2.6 Expansion Slots (PCI Express Slots)
There are 3 PCI Express slots on this motherboard.
PCIE slot:
PCIE7 (PCIE 2.0 x4 slot, from Intel® Z97 / C226 chipset) is used for PCI Express x4 lane width graphics cards.
PCIE4 (PCIE 3.0 x8 slot, from CPU) is used for PCI Express x8 lane width graphics cards.
PCIE6 (PCIE 3.0 x16 slot, from CPU) is used for PCI Express x16 lane width graphics cards.
Slot
PCIE 7
PCIE 6
PCIE 4
Generation Mechnical
2.0
x4
3.0
3.0
x16 x8
Eletrical
x4 x16 x8
Source
Intel® Z97 / C226 chipset
CPU
CPU
PCI Express Slot Configuration
Single Graphics Card
Two Graphics Cards
PCIE 6
x16 x8
PCIE 4
x8
17
18
Installing an expansion card
Step 1. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.
Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 Chapter 1 Introduction
- 7 1.1 Package Contents
- 8 1.2 Specifications
- 11 1.3 Unique Features
- 12 1.4 Motherboard Layout
- 15 1.5 I/O Panel
- 16 1.6 Block Diagram
- 17 Chapter 2 Installation
- 17 2.1 Screw Holes
- 17 2.2 Pre-installation Precautions
- 18 2.3 Installing the CPU
- 20 2.4 Installing the CPU Fan and Heatsink
- 21 2.5 Installation of Memory Modules (DIMM)
- 23 2.6 Expansion Slots (PCI Express Slots)
- 25 2.7 Onboard Headers and Connectors
- 32 2.8 Dr. Debug
- 33 2.9 Driver Installation Guide
- 34 2.10 Dual LAN and Teaming Operation Guide
- 35 2.11 M.2_SSD (NGFF) Module Installation Guide
- 38 Chapter 3 UEFI Setup Utility
- 38 3.1 Introduction
- 38 3.1.1 UEFI Menu Bar
- 39 3.1.2 Navigation Keys
- 40 3.2 Main Screen
- 41 3.3.1 CPU Configuration
- 44 3.3.2 DRAM Timing Configuration
- 49 3.3.3 FIVR Configuration
- 50 3.3.4 Voltage Configuration
- 51 3.4 Advanced Screen
- 52 3.4.1 CPU Configuration
- 54 3.4.2 Chipset Configuration
- 57 3.4.3 Storage Configuration
- 59 3.4.4 Intel® Rapid Start Technology
- 60 3.4.5 Intel® Smart Connect Technology
- 61 3.4.6 Intel® Thunderbolt
- 62 3.4.7 Super IO Configuration
- 63 3.4.8 ACPI Configuration
- 65 3.4.9 USB Configuration
- 67 3.4.10 Serial Port Console Redirection
- 71 3.5 Tools
- 72 3.6 H/W Monitor Screen
- 74 3.7 Boot Screen
- 77 3.8 Security Screen
- 78 3.9 Event Logs
- 80 3.10 Exit Screen
- 81 Chapter 4 Software Support
- 81 4.1 Install Operating System
- 81 4.2 Support CD Information
- 81 4.2.1 Running The Support CD
- 81 4.2.2 Drivers Menu
- 81 4.2.3 Utilities Menu
- 81 4.2.4 Contact Information
- 82 Chapter 5 Troubleshooting
- 82 5.1 Troubleshooting Procedures
- 84 5.2 Technical Support Procedures
- 84 5.3 Returning Merchandise for Service