2.0 INSTALLATION INSTRUCTIONS. Adesso Easy Cat, Browser Cat, Smart Cat Pro, GPP160, GP-160U-121, Smart Cat, GDB410, GP-160PB, GP-410PB, GP-415PB
Add to My manuals11 Pages
advertisement
2.0 INSTALLATION INSTRUCTIONS
CONNECTING YOUR TOUCHPAD TO THE COMPUTER
USB
1) Turn your computer on and start Windows.
2) Attach the USB connector to your computer.
3) If you see the “New Hardware Found” dialog box after connecting the touchpad, follow the prompts (insert your Windows CD if prompted) to install a standard HID compliant mouse.
4) Test the touchpad; it should operate with your existing drivers.
PS/2
1) Turn the power to your computer off.
2) Attach the PS/2 adapter to your computer
NOTE: Because the PS/2 ports for both touchpad and keyboard may appear identical, look for an icon or description next to each port on your computer to identify which to use.
3) Turn your computer on and start Windows. If you see the “New Hardware Found” dialog box after Windows starts, select CANCEL and continue with the next step.
4) Test the touchpad; it should operate with your existing drivers.
For Macintosh® installation (USB version only)
1) Turn your computer on.
2)
Attach the USB connector to your computer. Your Macintosh plug it in.
®
should detect the touchpad immediately when you
2 of 8
advertisement
Related manuals
advertisement
Table of contents
- 4 1.0 SYSTEM REQUIREMENTS
- 4 HARDWARE REQUIREMENTS
- 4 SOFTWARE REQUIREMENTS
- 5 2.0 INSTALLATION INSTRUCTIONS
- 5 CONNECTING YOUR TOUCHPAD TO THE COMPUTER
- 6 DRIVER SOFTWARE
- 6 TOUCHPAD
- 6 BASIC FUNCTIONS
- 7 ADVANCE FUNCTIONS
- 7 HORIZONTAL SCROLL
- 8 ZOOMING
- 8 BACK / FORWARD PAGE CONTROL
- 8 PRODUCT FEATURES
- 9 4.0 CUSTOMIZING YOUR TOUCHPAD FEATURES
- 9 USING THE GLIDEPOINT® CONTROL CENTER
- 9 5.0 CUSTOMER SERVICE
- 9 TROUBLESHOOTING
- 10 FREQUENTLY ASKED QUESTIONS
- 10 CUSTOMER SERVICE ASSISTANCE
- 11 6.0 WARRANTY INFORMATION
- 11 7.0 FCC REGULATORY NOTICE