SBC8600B User Manual

Embest Technology Co., Ltd 86

-------------------------------------------------------------------------------

+OEMIsFlashAddr(0x80002000) g_eboot.type 1

[0]: Address=0x80002000 Length=0x3c9e9bc Name="" Target=RAM

ROMHDR at Address 80002044h

Launch Windows CE image by jumping to 0x8000b6a0...

Windows CE Kernel for ARM (Thumb Enabled)

CPU CP15 Control Register = 0xc5387f

CPU CP15 Auxiliary Control Register = 0x42

I2C EEPROM returned wrong magic value 0xffffffff

+OALTimerInit(1, 24000, 200)

--- High Performance Frequecy is 24 MHz---

4.5.2 Update of NAND Flash Image

1) Formatting TF card

Please refer to the contents of 4.5.1 Update of TF Card.

2) Copy runtime image

Copy MLO, EBOOTND.nb0, NK.bin, XLDRNAND.nb0 and EBOOTSD.nb0 image files under CD\WINCE700\image to the TF card.

3) Update of NAND Flash image files

Insert TF card and short jumper JP5, reboot the system from TF card and press

Space in a few seconds to enter to the EBOOT menu, and then follow the steps listed below:



Type [8] to enter the Flash menu;



Type [9]->[4]->[A], [9]->[3]->[B] and [9]->[2]->[C] to write XLDR, EBOOT and NK images;



Type [0] to return to the main menu, and then type [2] and [3] to select boot-up from NAND Flash; Type [A] to select LCD/DVI display mode;

Type [7] and [y] to save the boot-up settings;

Remove TF card and the jumper cap, reboot the system. The system will boot from NAND

Flash.

Copyright © 2012 Embest Technology SBC8600B User Manual