- No category
![](http://s1.manualzz.com/store/data/006738649_1-0ba2803cfd0e73609067680a8aad4b99-128x128.png)
advertisement
![CV 2000 | Manualzz CV 2000 | Manualzz](http://s1.manualzz.com/store/data/006738649_1-0ba2803cfd0e73609067680a8aad4b99-360x466.png)
Instruction Manual
CV 2000
•
E1 version
G703 Rate : 2048 KBPS +/- 50ppm
G704 frame: Nx64 (1 to 31 TS) from 64 KBPS to 1984 KBPS.
Coding : HDB3
CRC4
Receiver sensitivity : -40 dB
Transparent mode : 2048 KBPS
Connector RJ45/120 Ohms or BNC 75 Ohms
•
T1 version
T1 Rate : 1544 KBPS +/- 50ppm
D4/ESF frame: Nx64 or Nx56 (1 to 24 TS/DS0s) from 56 or 64 KBPS to 1536 KBPS
Coding : B8ZS or AMI
CRC6
Receiver sensitivity : -36 dB
Transparent mode : 1544 KBPS
Connector RJ45/100 Ohms
•
Ethernet bridge interface :
Rates : 64 to 2048 KBPS (E1) or 56 to 1536 KBPS (T1/FT1)
Ethernet 802.3 – 10 Base T
Frame buffer memory: 256
MAC address memory: 10.000
MAC address filtering: filtering or transparent bridge
Ethernet compression: padding bits suppression/regeneration:
•
V11/X21 Interface:
Rates : 16 and 64 to 2048 KBPS (E1) or 56 to 1536 KBPS (T1/FT1)
Signal I : forced or active when connected
Clock :Network, terminal or internal, normal or reverse edge.
•
V35 and V36/RS530 Interfaces:
Rates : 64 to 2048 KBPS (E1) or 56 to 1536 KBPS (T1/FT1)
signal DSR, CD, CTS : forced or active when connected
Clock :Network, terminal or internal, normal or reverse edge.
•
V24/V28/RS232 Synchronous Interface:
Rates : 64 KBPS or 128 KBPS (E1) and 56 KBPS or 112 KBPS (T1/FT1)
signal DSR, CD, CTS : forced or active when connected
Clock :Network, terminal or internal, normal or reverse edge.
•
V24/V28/RS232 Asynchronous Interface:
Rates : 300,600,1200,2400,4800,9600,19200,38400 BPS
Character format: 9bits (7,n,1), 10 bits (8,n,1/7,e,1..) , 11 bits and 12 bits.
signal DSR, CD, CTS : forced or active when connected
signal DSR, CTS : can follow remote DTR and RTS.
•
4BRI Interface:
4 interfaces Rates : 192kBPS
channel B1, B2, D allocated to any Time Slot
4 D channels in 4 dedicated Time Slots or in 1 single Time Slot.
Terminal or Network Mode
Clock : Network or Terminal 1,2,3,4 mode.
CV 2000 - Page 37
advertisement
Related manuals
advertisement
Table of contents
- 9 Introduction
- 9 DTE interface
- 9 Conditioning
- 9 Configuration
- 10 Installation
- 10 Desktop version
- 11 Rack mount version
- 13 Front Panel, Display and Switches
- 13 LED display
- 13 The push button
- 14 Typical applications
- 14 LAN to LAN connection
- 14 LAN to LAN bridging
- 15 Terminal Adapter to PBX transport
- 15 Operation and Configuration
- 16 Factory and User Configurations
- 16 MxCfg configuration software
- 17 VT100 Interactive Menus
- 18 Main menu
- 18 Menu 1: Configuration
- 19 Menu 1.2 : Edit a configuration
- 21 Menu 1.2.1: TS Selection menu
- 22 Menu 2: Status and statistics
- 22 Menu 3: Loop Test
- 23 Menu 4: Display and passwords
- 23 Menu 5 : Remote control
- 24 Interfaces parameters
- 24 V11/X21 Interface (CV2011)
- 24 General
- 24 Parameters
- 25 V35 & V36 Interfaces (CV2035 & CV2036)
- 25 General
- 26 Parameters
- 26 V24/V28/RS232 Interface (CV2028)
- 26 General
- 27 Synchronous mode parameters
- 28 Asynchronous mode parameters
- 29 Ethernet 10BaseT Bridge Interface (CV20BT)
- 29 General
- 30 Parameters
- 30 4 ISDN S Interface (CV24BR)
- 30 General
- 31 Parameters
- 32 CV24BR Rear Panel
- 33 Diagnostics and tests
- 33 Diagnostics
- 33 Timeslot assignment and clock
- 34 Network Interface Status
- 34 E1 G703-G704 interface
- 34 T1/FT1 interface
- 34 DTE Interface Status
- 34 X21 interface
- 34 V35,V36 or V28 interface
- 34 10BT interface
- 35 4BRI interface
- 35 Error Statistics
- 35 Status Statistics
- 35 Test
- 35 Local Analogue Loop
- 35 Remote Digital Loop
- 37 Technical Characteristics
- 37 Transmission Modes
- 38 General Characteristics
- 38 Troubleshooting
- 39 Appendix
- 39 Appendix A – Wiring
- 39 Serial Control Port - RJ45
- 39 RJ45 - Line connector
- 41 BNC - Line connectors
- 41 10 Base T Interface connector
- 42 X21/V11 interfaces - DB25 connector & DB25-DB15 cable
- 43 V35 Interface - DB25 Connector and DB25-M34 cable
- 44 V36 interface - DB25 connector & DB25-DB37 cable
- 45 V28/RS232 interface - DB25 Connector & DB25-DB25 cable
- 45 4BRI Interface RJ45
- 46 Appendix B - Jumpers configuration
- 49 Appendix C : Warranty, General Conditions