Digital Sound. JVC HD-56G786, Projection Television HD-52G886, HD-ILA HD-56G886, HD-ILA HD-52G886, HD-52G786, HD-56G886, HD-52G886

Digital Setup

Digital Sound

You can select the optical digital sound output, either PCM or Dolby Digital when your TV is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can enjoy listening in 5.1ch sound when watching digital broadcasts.

Press the M

ENU

button

π†

è

To DIGITAL SETUP

To

π†

To Digital Sound

è

To select PCM or DOLBY DIGITAL

Press the M

ENU

button when finished

Notes:

• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it cannot output the sound from the speakers.

• For connecting an amplifier using the optical output, see page 23.

Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories.

Aspect Ratio

You can select the aspect mode for ATSC from 4:3 or 16:9.

Press the M

ENU

button

π†

è

To DIGITAL SETUP

To

è

To select 4:3 or 16:9

Press the M

ENU button when finished

Notes:

• Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT.

• Make sure the mode you choose is the same as the TV’s aspect ratio when the recorded program is played back, so that you can obtain a good picture quality, free from any unatural distortions.

79

5/16/05, 5:02:17 PM LCT1866-001A-A ENG e 79