Mechanical Instruction

2

2

220

BW

8 LCD

Important Safety Notice

Proper s ervic e and repair is important to the safe, reliable operation of all Philips Consumer Electronics Company equipment. The service procedures recommended by Philips and described in this service manual a re effective methods of performing service operations . Some of these service operations require the us e of tools speciall y designed for the purpose. The special tools should be used when and as recomm ended.

It is im portant to note that this m anual c ontains various

CAUTI ONS and NOTICES which should becarefully read in order to m inimize the risk of personal injury to service personnel . The possibility exists that improper service methods may damage the equipment. It is also important to underst and that these CAUTIONS and NOTICES ARE NOT

EXHAUSTIVE. Philips could not possibly know, evaluate and advise the servic etrade of all conceivable ways i n which service might be done or of the possible hazardous consequences of each way. Consequently, Philips has not undertaken any such broad evaluation. Accordingly, who uses a servi ce procedure or tool which is not recommended by Philips must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.

* * Hereafter throughout this manual, Philips Consumer

Electronics Company will be referred to as Philips . * *

FOR PRODUCTS CONTAINING LASER :

DANGER Invisible laser radiation when open.

AVOID DIRECT EXPOSURE TO BEAM.

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION The use of optical instruments with this product will increase eye hazard.

TO ENSURE THE CONTINUED RELIABILITY OF THIS

PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S

REPLACEMENT PAR TS, WHICH ARE LISTED WITH THEIR PART

NUMBERS IN THE PARTS LIST SECTION OF THIS

SERVICE MANUAL.

Take care during handling the LCD module with backlight unit

WARNING

- Must mount the module using mounting holes arranged in four corners.

- Do not press on the panel, edge of the frame strongly or electric

Critical components having special safety characteristics are shock as this will result in damage to the screen.

identified with a by the Ref. No. in the parts list and

- Do not scratch or press on the panel with any sharp objects, such enclosed within a broken line

(where several critical components are grouped in one area) along with the safety symbol on the schematics or exploded views.

http://www.wjel.net

or other hazards .

as pencil or pen as this may result in damage to the panel.

- Protect the module from the ESD as it may damage the electronic circuit (C -MOS).

- Make certain that treatment body are grounded through wrist band.

- Do not leave the module in high temperature and in areas of high

Under no circumstances should the original design be humidity for a long time.

modified or altered without written permission from Philips.

- Avoid contact with water as it may as hort circuit within the module.

Philips assumes no liability, express or implied, arising out of

- If the surface of panel become dirty, please wipe it off with a soft any unauthorized modification of design.

material. (Cleaning with a dirty or rough cloth may damage the

Servicer assumes all liability.

panel.)