Using the menus. Infocus IN1112, in1100, InFocus IN1110, IN1110

Using the menus

To open the menus, press the Menu button on the keypad or remote. (The menu automatically closes after 60 seconds if no buttons are pressed.) Use the up and down arrow buttons to highlight the desired menu option and then press the Select or right arrow button.

To change the menu settings (or enter another submenu), highlight the desired menu option and press the Select or right arrow button. Use the left and right arrow buttons to scroll through the options and make adjustments. To save your adjustments, press Select.

Press the Menu button again to exit the menu system.

The menus are grouped by usage:

• The Basic menu provides common image adjustments.

• The Advanced menu provides more complex image adjustments, set-up type adjustments that are not changed often and information about the projector and source.

menu navigation buttons

Basic menu

23

Advanced menu