100 Editor Setup
Start renumbering from line containing
Use this field to specify a renumbering start trigger. If you specify a renumbering start trigger, renumbering will start from the first block containing the specified string. To start from the first block after the block containing the string, check the Start at next block option below.
Start at next block
Check this field to start renumbering from the block after the line containing the renumbering start trigger.
The Block numbers settings will only affect the selected file type.
6.2.3 Load / Save
To configure Load/Save parameters, select File Type from the left tree menu in the Setup window and then click Load/Save, or click the Directories / Extensions icon in the File
Type menu within the Editor tab. The Load/Save configuration dialog is shown below.
Load/Save configuration dialog.
101
Load/Save
Default extension
Specify a default extension to use for the selected file type. This extension will be appended to any new files saved, unless an extension is specified in the Save as window.
Register default extension
Check this field to register the specified default extensions. When an extension is registered in Windows, clicking on a file with the specified extension in the Windows
Explorer will automatically open the file in the editor.
Additional extensions
Define additional file extensions associated with your machine type. Extensions determine the type(s) of file(s) you wish to open (only files with the extension(s) defined here will be displayed in an Open file window). You can define more than one extension using a comma ',' as separator.
Example: To associate the extensions .ISO and .NC, specify ISO, NC.
Register additional extensions
Check this field to register the specified Additional extensions. When an extension is registered in Windows, clicking on a file with the specified extension in the Windows
Explorer will automatically open the file in the editor.
Default load path
This function specifies the default load path, which is where the file Open dialog will first point to. If no path is defined, the last directory you loaded a file from will be used.
Click on the folder button to browse for an adequate load path.
Default save path
This function specifies the default save path, which is where the file Save dialog will first point to, when you wish to save a new file of the selected type or when you use the file Save as menu. If no path is defined, the last directory you saved a file in will be used. Click on the folder button to browse for an adequate save path.
Use separate load/and save directories
When this field is checked, the editor will remember the last load and save position independently.
102 Editor Setup
Backup / Save
Auto save interval
Select the length of the interval between auto saves from this list. Auto save saves your file at a regular interval, overwriting the original file.
Save with linefeed type
Use this field to specify the linefeed type used when saving files.
Auto: Do not change linefeed type. When saving new files, the DOS/Windows linefeed type is used.
DOS/Windows: CR LF (ASCII 13 10)
Unix: LF (ASCII 10)
Mac: CR (ASCII 13)
UNICODE Files
Message when loading UNICODE
Displays a message when a UNICODE file is loaded.
Prompt to save files as UNICODE
Check this field if the file should be saved as UNICODE.
Always save files as UNICODE
Check this field if files always should be saved as UNICODE.
Always save files as regular text
Check this field if files should never be saved as UNICODE.
The Load/Save settings will only affect the selected file type.
