Instruction Manual

2

16

Connecting

Optional equipment connection

HDMI connection

You can enjoy the sound and picture from HDMI connection on external device.

For enjoying sound only

You can enjoy the sound from the external device you connect.

For enjoying both sound and picture

You can enjoy both sound and picture from the external device you connect.

To the Blu-ray disc player,

DVD player, etc.

1. Connect HDMI IN jack on the back of the unit to

HDMI OUT jack on the audio device such as Bluray disc player, DVD player, etc.

2. Set the INPUT source to HDMI IN. Press repeatedly FUNC on the remote control or F on the unit until the function is selected.

1. Connect HDMI IN jack on the back of the unit to

HDMI OUT jack on the external device such as

Blu-ray disc player, DVD player, etc.

2. Connect HDMI OUT jack on the back of the unit to HDMI IN jack on the TV.

3. Set the INPUT source to HDMI IN. Press repeatedly FUNC on the remote control or F on the unit until the function is selected.

,

Note y With the unit connected to external devices and TV as above illustration, TV will output picture and sound from external devices when the unit is turned off in HDMI IN mode.

y HDMI OUT jack is for TV connection. Even though multi channel is inputted to the unit through an HDMI cable, the unit can only output 2 channel to TV.

y When this unit is turned off, multi channel audio sources will be passed through without transformation.

OPTICAL IN connection

Connect an optical output jack of external devices to the OPTICAL IN jack.

Connecting

17

PORTABLE IN connection

MP3 player, etc...

To the optical output jack of external device

1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your TV (or digital device etc.)

2. Select the input source to OPTICAL by pressing

FUNC on the remote control or F on the unit until the function is selected.

To directly select the OPTICAL function, press

OPTICAL on the remote control.

3. Listen to sound.

4. Press OPTICAL to exit from OPTICAL.

Function is retuned to previous one.

,

Note y When you Press OPTICAL button on the remote, while unit is turned off, the unit wll be turned on and optical function will be selected.

y Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.

Listening to music from your portable player

The unit can be used to play the music from many types of portable players or external devices.

1. Connect the portable player to the

PORTABLE IN connector of the unit by using 3.5 mm stereo cable.

2. Turn the power on by pressing 1 (Power).

3. Select the PORTABLE function by pressing

FUNC on the remote control or F on the unit until the function is selected.

4. Turn on the portable player or external device and start playing it.

2

2

18

Connecting

USB connection

Connect USB memory device to the USB port on the back of the unit.

USB device requirement

y Devices which require additional program installation connected to a computer, are not supported.

y Do not extract the USB device while in operation.

y For a large capacity USB, it may take longer than a few minutes to be searched.

y To prevent data loss, back up all data.

y This unit is not supported when the total number of files is 2000 or more.

y The unit’s USB Port cannot be connected to PC.

The unit can not be used as a storage device.

y The exFAT file system is not supported on this unit. (FAT16/FAT32/NTFS systems are available.)

For more information of playing files on a USB, refer

to the page 20.

Removing the USB Device from the unit.

1. Choose a different function/mode or press

Z twice in a row.

2. Remove the USB device from the unit.

Compatible USB devices

y MP3 Player : Flash type MP3 player.

y USB Flash Drive : Devices that support USB 2.0.

y The USB function of this unit does not support some USB devices.

y Depending on some devices, it may not available to recognize the followings on this unit.

- External HDD

- Card readers

- Locked devices

- Hard type USB devices

- USB hub

- Using USB extension cable

- iPhone/iPod/iPad

- Android device

Playable file

Sampling Frequency

MP3 : within 32 to 48 kHz

WMA : within 32 to 48 kHz

OGG : within 32 to 48 kHz

FLAC : within 32 to 192 kHz

WAV : within 32 to 48 kHz

Bitrate

MP3 : within 80 to 320 kbps

WMA : within 56 to 128 kbps

OGG : within 64 to 500 kbps

FLAC : within 500 to 5000 kbps

WAV : within 500 to 5000 kbps y Maximum files : Under 1999 y A protected file by DRM (Digital rights management) cannot be played on the unit.

y Video files in the USB storage device can not be played.

y Depending on the performance of your USB device, playback may not work well.

Connecting

19

,

Note y Folders and files on the USB are recognized as below.

*ROOT

: Folder

: File a

C

D

E b

F

G c

H

I d

J

A

B y If there is no file in a folder, the folder will not appear.

y File will be played from file

$A to file $J one by one.

y Files and folders will be presented in order recorded and may be presented differently depending on the record circumstances.

y This unit can display file or folder names that contain numbers or English characters only.

y *ROOT : The first screen you can see when a computer recognize the USB is “ROOT”.

2