Manual

Mytek Manhattan Digital to Analog Converter – User's Manual

7. Rotate the knob to select your remote's proper channel, either 00, 16 or 20. Press the Menu button to set the Address channel.

8. Exit all menus by pressing the Menu button until volume and sample rate are visible, this will reactivate the volume knob.

6.8.3 RC 5 Remote Overview

The Mytek Stereo192-DSD DAC can operate as:

•

TV - address – 00

•

Preamp - address – 16

•

CD - address – 20

In each of these options the remote's volume up and volume down buttons correspond to turning the Manhattan DAC's Main knob.

6.8.4 RC 5 Remote Assignments

"vol_up" - vol knob right

"vol_down" – vol knob left

"1" - press "menu"

"2" - press "FN1"

"3"- press "FN2"

"4" menu knob left

"5" - press knob

"6" - menu knob right

(command - 16)

(command - 17)

(command - 01)

(command - 02)

(command - 03)

(command - 04)

(command - 05)

(command - 06)

6.9 DISPLAY

•

BRIGHTNESS – Sets the brightness the LED display (16 levels)

•

METERS - Turns the signal level meters on or off. Available settings: ON / OFF

•

AUTO-OFF - This will turn the whole display off after selected amount of time (secs). A dim dot will stay lit to show that the unit is operational. Engaging any controls will wake up displays.

Available settings: DISABLE / 5 SEC / 10 SEC / 15 SEC www.mytekdigital.com

Page: 21/25