4.9.1.5 Authenticated Host. Planet WGS-804HPT, WGS-4215-8T, WGS-4215-8T2S
Add to My manuals349 Pages
advertisement
▼
Scroll to page 2
of
349
User’s Manual of WGS Managed Series
The page includes the following fields:
Object
Port Name
Enable State
In Guest VLAN
Description
The switch port number of the logical port
Display the current state
Display the current guest VLAN
4.9.1.5 Authenticated Host
The Authenticated Host Table screen in Figure 4-9-9 appears.
Figure 4-9-9 Authenticated Host Table Page Screenshot
The page includes the following fields:
Object Description
User Name
Port
Session Time
Display the current user name
Display the current port number
Display the current session time
Authentication Method
Display the current authentication method
MAC Address
Display the current MAC address
221
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 10 1.1 Packet Contents
- 11 1.2 Product Description
- 15 1.3 How to Use This Manual
- 16 1.4 Product Features
- 19 1.5 Product Specifications
- 25 2.1 Hardware Description
- 25 2.1.1 Switch Front Panel
- 28 2.1.2 LED Indications
- 32 2.1.3 Physical Dimensions
- 35 2.2 Installing the Switch
- 35 2.2.1 Wall Mount/Magnet Installation
- 36 2.2.2 DIN-rail Mount Installation
- 38 2.2.3 Installing the SFP transceiver
- 41 3.1 Requirements
- 42 3.2 Management Access Overview
- 43 3 Web Management
- 44 4 SNMP-based Network Management
- 44 5 PLANET Smart Discovery Utility
- 49 4.1 Main Web Page
- 50 4.1.1 Save Button
- 51 4.1.2 Configuration Manager
- 52 4.1.2.1 Saving Configuration
- 53 4.2 System
- 53 4.2.1 System Information
- 54 4.2.2 IP Configurations
- 56 4.2.3 IPv6 Configuration
- 58 4.2.4 User Configuration
- 59 4.2.5 Time Settings
- 59 4.2.5.1 System Time
- 62 4.2.5.2 SNTP Server Settings
- 63 4.2.6 Log Management
- 63 4.2.6.1 Local Log
- 64 4.2.6.2 Local Log
- 65 4.2.6.3 Remote Syslog
- 67 4.2.6.4 Log Message
- 69 4.2.7 SNMP Management
- 69 4.2.7.1 SNMP Overview
- 70 4.2.7.2 SNMP System Information
- 70 4.2.7.3 SNMP View
- 72 4.2.7.4 SNMP Access Group
- 74 4.2.7.5 SNMP Community
- 75 4.2.7.6 SNMP User
- 77 4.2.7.7 SNMPv1, 2 Notification Recipients
- 78 4.2.7.8 SNMPv3 Notification Recipients
- 79 4.2.7.9 SNMP Engine ID
- 80 4.2.7.10 SNMP Remote Engine ID
- 82 4.3 Port Management
- 82 4.3.1 Port Configuration
- 84 4.3.2 Port Counters
- 89 4.3.3 Bandwidth Utilization
- 90 4.3.4 Port Mirroring
- 92 4.3.5 Jumbo Frame
- 93 4.3.6 Port Error Disabled Configuration
- 95 4.3.7 Port Error Disabled
- 95 4.3.8 Protected Ports
- 98 4.3.9 EEE
- 99 4.3.10 SFP Module Information
- 99 4.3.10.1 SFP Module Status
- 101 4.3.10.1 SFP Module Detail Status
- 102 4.4 Link Aggregation
- 104 4.4.1 LAG Setting
- 105 4.4.2 LAG Management
- 106 4.4.3 LAG Port Setting
- 108 4.4.4 LACP Setting
- 109 4.4.5 LACP Port Setting
- 110 4.4.6 LAG Status
- 113 4.5 VLAN
- 113 4.5.1 VLAN Overview
- 114 4.5.2 IEEE 802.1Q VLAN
- 118 4.5.3 Management VLAN
- 119 4.5.4 Create VLAN
- 120 4.5.5 Interface Settings
- 124 4.5.6 Port to VLAN
- 125 4.5.7 Port VLAN Membership
- 126 4.5.8 Protocol VLAN Group Setting
- 128 4.5.9 Protocol VLAN Port Setting
- 129 4.5.10 GVRP Setting
- 131 4.5.11 GVRP Port Setting
- 132 4.5.12 GVRP VLAN
- 133 4.5.13 GVRP Statistics
- 135 4.5.14 VLAN setting example
- 135 4.5.14.1 Two separate 802.1Q VLANs
- 138 4.5.14.2 VLAN Trunking between two 802.1Q aware switches
- 141 4.6 Spanning Tree Protocol
- 141 4.6.1 Theory
- 148 4.6.2 STP Global Settings
- 150 4.6.3 STP Port Setting
- 153 4.6.4 CIST Instance Setting
- 155 4.6.5 CIST Port Setting
- 157 4.6.6 MST Instance Configuration
- 159 4.6.7 MST Port Setting
- 161 4.6.8 STP Statistics
- 162 4.7 Multicast
- 162 4.7.1 Properties
- 163 4.7.2 IGMP Snooping
- 167 4.7.2.1 IGMP Setting
- 169 4.7.2.2 IGMP Querier Setting
- 170 4.7.2.3 IGMP Static Group
- 171 4.7.2.4 IGMP Group Table
- 172 4.7.2.5 IGMP Router Setting
- 173 4.7.2.6 IGMP Router Table
- 174 4.7.2.7 IGMP Forward All
- 175 4.7.3 IGMP Snooping Statics
- 177 4.7.4 MLD Snooping
- 177 4.7.4.1 MLD Setting
- 179 4.7.4.2 MLD Static Group
- 180 4.7.4.3 MLD Group Table
- 180 4.7.4.4 MLD Router Setting
- 182 4.7.4.5 MLD Router Table
- 183 4.7.4.6 MLD Forward All
- 184 4.7.5 MLD Snooping Statics
- 186 4.7.6 Multicast Throttling Setting
- 187 4.7.7 Multicast Filter
- 188 4.7.7.1 Multicast Profile Setting
- 189 4.7.7.2 IGMP Filter Setting
- 190 4.7.7.3 MLD Filter Setting
- 192 4.8 Quality of Service
- 192 4.8.1 Understanding QoS
- 193 4.8.2 General
- 193 4.8.2.1 QoS Properties
- 194 4.8.2.2 QoS Port Settings
- 195 4.8.2.3 Queue Settings
- 196 4.8.2.4 CoS Mapping
- 198 4.8.2.5 DSCP Mapping
- 199 4.8.2.6 IP Precedence Mapping
- 201 4.8.3 QoS Basic Mode
- 201 4.8.3.1 Global Settings
- 202 4.8.3.2 Port Settings
- 203 4.8.4 Rate Limit
- 203 4.8.4.1 Ingress Bandwidth Control
- 204 4.8.4.2 Egress Bandwidth Control
- 205 4.8.4.3 Egress Queue
- 206 4.8.5 Voice VLAN
- 206 4.5.8.1 Introduction to Voice VLAN
- 207 4.8.5.2 Properties
- 208 4.8.5.3 Telephony OUI MAC Setting
- 210 4.8.5.4 Telephony OUI Port Setting
- 212 4.9 Security
- 212 4.9.1 802.1X
- 213 4.9.1.1 Understanding IEEE 802.1X Port-based Authentication
- 216 4.9.1.2 802.1X Setting
- 217 4.9.1.3 802.1X Port Setting
- 219 4.9.1.4 Guest VLAN Setting
- 221 4.9.1.5 Authenticated Host
- 222 4.9.2 RADIUS Server
- 225 4.9.3 TACACS+ Server
- 227 4.9.4 AAA
- 228 4.9.4.1 Login List
- 229 4.9.4.2 Enable List
- 230 4.9.5 Access
- 230 4.9.5.1 Telnet
- 231 4.9.5.2 SSH
- 233 4.9.5.3 HTTP
- 234 4.9.5.4 HTTPs
- 235 4.9.6 Management Access Method
- 235 4.9.6.1 Profile Rules
- 237 4.9.6.2 Access Rules
- 238 4.9.7 DHCP Snooping
- 238 4.9.7.1 DHCP Snooping Overview
- 239 4.9.7.2 Global Setting
- 240 4.9.7.3 DHCP Snooping VLAN Setting
- 242 4.9.7.4 Port Setting
- 244 4.9.7.5 Statistics
- 245 4.9.7.6 Database Agent
- 247 4.9.7.7 Rate Limit
- 248 4.9.7.8 Option82 Global Setting
- 249 4.9.7.9 Option82 Port Setting
- 251 4.9.7.10 Option82 Circuit-ID Setting
- 252 4.9.8 Dynamic ARP Inspection
- 252 4.9.8.1 Global Setting
- 253 4.9.8.2 VLAN Setting
- 254 4.9.8.3 Port Setting
- 256 4.9.8.4 Statistics
- 257 4.9.8.5 Rate Limit
- 258 4.9.9 IP Source Guard
- 259 4.9.9.1 Port Settings
- 261 4.9.9.2 Binding Table
- 262 4.9.10 Port Security
- 264 4.9.11 DoS
- 264 4.9.11.1 Global DoS Setting
- 267 4.9.11.2 DoS Port Setting
- 268 4.9.12 Storm Control
- 268 4.9.12.1 Global Setting
- 269 4.9.12.2 Port Setting
- 271 4.10 ACL
- 272 4.10.1 MAC-based ACL
- 273 4.10.2 MAC-based ACE
- 276 4.10.3 IPv4-based ACL
- 277 4.10.4 IPv4-based ACE
- 282 4.10.5 IPv6-based ACL
- 283 4.10.6 IPv6-based ACE
- 288 4.10.7 ACL Binding
- 289 4.11 MAC Address Table
- 290 4.11.1 Static MAC Setting
- 291 4.11.2 MAC Filtering
- 292 4.11.3 Dynamic Address Setting
- 293 4.11.4 Dynamic Learned
- 295 4.12 LLDP
- 295 4.12.1 Link Layer Discovery Protocol
- 296 4.12.2 LLDP Global Setting
- 298 4.12.3 LLDP Port Setting
- 301 4.12.4 LLDP Local Device
- 303 4.12.5 LLDP Remove Device
- 304 4.12.6 MED Network Policy
- 308 4.12.7 MED Port Setting
- 311 4.12.8 LLDP Overloading
- 312 4.12.9 LLDP Statistics
- 314 4.13 Diagnostics
- 314 4.13.1 Cable Diagnostics
- 316 4.13.2 Ping
- 316 4.13.3 Ping Test
- 317 4.13.4 IPv6 Ping Test
- 318 4.13.5 Trace Router
- 319 4.14 RMON
- 319 4.14.1 RMON Statistics
- 321 4.14.2 RMON Event
- 322 4.14.3 RMON Event Log
- 323 4.14.4 RMON Alarm
- 326 4.14.5 RMON History
- 327 4.14.6 RMON History Log
- 328 4.15 Power over Ethernet
- 329 4.15.1 Power over Ethernet Powered Device
- 330 4.15.2 System Configuration
- 331 4.15.3 Power over Ethernet Configuration
- 334 4.15.4 PoE Schedule
- 337 4.15.5 PoE Alive Check Configuration
- 339 4.16 Maintenance
- 339 4.16.1 Factory Default
- 340 4.16.2 Reboot Switch
- 340 4.16.3 Backup Manager
- 341 4.16.4 Upgrade Manager
- 342 4.16.5 Dual Image
- 344 5.1 Address Table
- 344 5.2 Learning
- 344 5.3 Forwarding & Filtering