USER`S MANUAL

RESETS

+ = FULL RESET

A full reset will return Robosapien™V2 to his default body position. This will not affect his programmed settings.

= QUICK RESET / wALKINg gAIT ChANgE

This button returns Robosapien™V2 to his default standing position. This will also change Robosapien™V2’s gait when walking

(See: Walking p.14)

+ = SLEEP / wAKE UP

Press once to make Robosapien™V2 enter sleep mode. Before his final voice, you can stop him from going to sleep by pressing .

When in sleep mode Robosapien™V2 will not respond to his sensors or any controller commands except Wake Up.

By pressing and holding + for about 2 seconds,

Robosapien™V2 will wake up. His programs are not affected.

+ + + = POwER DOwN

This turns Robosapien™V2 off completely. To turn him back on, press the power button on his back OFF then ON again. His programs are not affected.

= SONIC SENSORS ON /OFF

Press once to disable Robosapien™V2’s hearing.

Press again to enable Robosapien™V2’s hearing.

For more information on his Sonic Sensors See: Sonic

Sensors (P.26-27)

= VISION SySTEMS ON /OFF

Press once to disable Robosapien™V2’s vision.

Press again to enable Robosapien™V2’s vision.

For more information on his Sonic Sensors See: Vision

Systems (P.22)

19