User Manual Economy IP Camera

Page 9

Economy IP Camera User Manual

4 Remote Live Surveillance

Functions of remote configurations include: System Configuration, Video Configuration,

Alarm Configuration, Network Configuration and Advanced Configuration. User should firstly select the menu on the left, and then set the relative parameters. When a user set the parameters of a certain device, other users can not set this device.

4.1 System Configuration

The “System configuration” includes three submenus: Basic Information, Date & Time and SD card.

4.1.1 Basic Information

Go to ConfigBasic information menu as shown below. In the basic information interface, user can set up the device name and check the relative information of the server.

4.1.2 Date & Time Configuration

Setting steps:

1. Go to “System Configuration”  “Date & Time”.

2. Set time zone.

3. Enable DST mode as required.

4. Set time. You may set time manually or enable NTP.