- No category
advertisement
1.4 Front Panel
User’s Manual
Name
1. *SMART CARD
2. *CI SLOT
3. INFORMATION
4. SIGNAL STRENGTH
5. LOCK
6/9.
7/8.
10. OK
11. MENU
1.5 Rear Panel
Function
Insert smart card
Insert CAM card
Display status
Display signal strength
Bright if signal is locked
Move cursor left/right
Move cursor up/down
Display service information or confirm operation
Display/exit from main menu or back to previous menu
4
User’s Manual
Name
1. Grounding Screw
2. ON/OFF
Function
Used for grounding protection
Power switch
AC power supply port
3. 100V-240V~
4. LOOP THROUGH
Loop output RF signal to another decoder
5. LNB IN/RF IN/ANT IN
Input signal of DVB-S/S2, DVB-C, DVB-T, ABS-S, DMB-TH, etc
6. RS232
7. *ALARM OUT
8. *AES OUT
Serial port used for software upgrade, etc
Output high level (5V) when there is abnormal signal
Output AES3-id digital audio signal
9/10. *ETHERNET2/1
11. *ASI IN
Connect to Ethernet
Input port for TS in ASI format, used for decoder cascading
12. *ASI IN LOOPOUT
Loop output port for TS in ASI format
13/14. *ASI OUT1/2
Output port for TS in ASI format, used for decoder cascading
15/16. *CVBS1/2
Output CVBS video signal (VBI Teletext output port)
17/18. AUDIO-R/L
19. OSD CVBS
Output right/left audio signal for monitoring
Output CVBS video signal with OSD for monitoring
20. S-VIDEO
Output Y/C video signal to TV
21. *HDMI
Output video and audio signal to TV (support HD output)
22. *RIGHT ANALOG
Output right analog XLR audio signal
XLR AUDIO
XLR AUDIO
5
advertisement
Related manuals
advertisement
Table of contents
- 9 1. Product Description
- 9 1.1 Introduction
- 9 1.2 Notice
- 9 1.3 Main Feature
- 10 1.4 Front Panel
- 10 1.5 Rear Panel
- 12 2. Installation
- 12 2.1 System Connection
- 12 2.2 Power on
- 13 2.3 Search Program
- 13 2.4 Play Program
- 14 3. Main Menu
- 14 3.1 Status
- 14 3.2 Input
- 14 3.2.1 Input Source
- 14 3.2.2 *LNB Setting (DVB-S/S2 Tuner)
- 15 3.2.3 Search
- 16 3.3 Service
- 16 3.3.1 Service Selection
- 16 3.3.2 Service Editing
- 17 3.4 Decrypt
- 17 3.4.1 *CI Module
- 17 3.4.2 *CA Module
- 18 3.4.3 BISS Setting
- 18 3.5 *Output
- 18 3.5.1 *ASI Output
- 18 3.5.2 *IP Output
- 19 3.6 System
- 19 3.6.1 General Setting
- 20 3.6.2 Network Setting
- 20 3.6.3 AV Setting
- 21 3.6.4 VBI Setting
- 21 3.6.5 *Alarm Setting
- 23 3.7 Preset
- 23 3.7.1 Restore
- 23 3.7.2 Reboot
- 23 3.7.3 Configuration Save
- 23 3.7.4 Configuration Load
- 23 3.8 Identity
- 24 4. *Scrambled Program
- 24 4.1 *Insert Card
- 24 4.2 Search Scrambled Program
- 24 5. *ASI Cascade Setting
- 25 6. Web Server Description
- 25 6.1 Introduction
- 25 6.2 Web Page Description
- 26 6.2.1 Status
- 26 6.2.2 Identity
- 27 6.2.3 System
- 27 6.2.4 Decrypt
- 29 6.2.5 *Input
- 29 6.2.6 Service
- 30 6.2.7 *Output
- 31 6.2.8 *Alarm
- 31 6.2.9 Preset
- 34 7. Specification
- 37 8. Trouble Shooting
- 38 9. Acronym