advertisement
![Operating elements. GRAUPNER X-8N | Manualzz Operating elements. GRAUPNER X-8N | Manualzz](http://s1.manualzz.com/store/data/007036340_1-bc40c2e7d49968501a40eed82612775e-360x466.png)
12
Operating elements
①
③
④
⑤
②
⑥
InnovatIon & technology
4. socket
First use
Battery connection
• Use NiCd/NiMH batteries of size AA. (or a LiPo battery with 1 cell)
• Remove the cover and connect the battery or the battery holder, while observing the correct polarity. Shut the cover and ensure the cover sits properly.
• If a voltage warning has been triggered, charge the batteries.
• Correctly set the battery type and the battery warning threshold in accordance with the used battery.
• You can also charge batteries in the transmitter. To do so, use the charger depending on the type of battery (NiMh or LiPo), which is optionally available. The charging current must not be above 1 A
, since this would destroy the transmitter and could cause a fire. Observe the correct polarity of the charging socket (see figure below).
Polarity of the charging socket
13
advertisement
Related manuals
advertisement
Table of contents
- 2 Table of contents
- 3 Foreword
- 3 Intended use
- 3 Technical data
- 4 Delivered items
- 5 Key to the Symbols
- 5 Safety notes
- 6 Information on handling batteries
- 8 General operating instructions
- 13 Operating elements
- 13 First use
- 14 Adjusting the neutralization springs
- 14 Adjusting the position of the steering wheel
- 14 Converting the steering wheel for left-handers
- 15 Binding and range test
- 16 Start display
- 17 Layout of switches and buttons
- 18 Button functions
- 18 Main menu
- 19 Mod. SEL menu
- 20 MOD NAME menu
- 20 MOD COPY menu
- 21 RF SET menu
- 22 REVERSE menu
- 22 E.P.A menu
- 22 DR/EXPO menu
- 24 TRIM menu
- 24 B.R.A. menu (ATL)
- 25 TH RESP menu
- 25 TIMER menu
- 27 S/SPEED menu
- 27 FAIL SAFE menu
- 28 A.B.S. menu
- 28 IDLE UP menu
- 29 PUMPING menu
- 29 START menu
- 30 P/MIX menu
- 30 HW SET menu
- 31 SW FUN menu
- 33 S/MODE menu
- 35 SERVO menu
- 35 AUX menu
- 35 SYSTEM menu
- 36 TELEMETRY MENU
- 38 Telemetry display
- 38 Hidden mode
- 39 Firmware update transmitter
- 40 Operating receiver GR
- 42 electric-powered models
- 43 Firmware update receiver
- 44 Notes
- 46 Recommended accessories
- 46 Environmental protection notes
- 47 Declaration of conformity
- 48 Warranty