EKI-4654R User Manual - Login

Trunk Commands Set

Netstar Commands Level aggregator priority

[1~65535] aggregator activityport

[Group ID][Port

Description

G

Set activity port

Example

G

Set port group system priority switch(config)#aggregator priority

22

switch(config)#aggregator

activityport 2 2

Numbers] aggregator group

[GroupID] [Port-list] lacp workp

[Workport] aggregator group

[GroupID] [Port-list] nolacp

G

Assign a trunk group with LACP active. switch(config)#aggregator group

1 1-4 lacp workp 2

[GroupID] :1~3 list, This parameter could be a port or

[Port-list]:Member port switch(config)#aggregator group

2 1,4,3 lacp workp 3

range(ex.1-4) or a port list separate by a comma(ex.2, 3, 6)

[Workport]: The amount of work ports, this value could not be less than zero or be large than the amount of member ports.

G

Assign a static trunk group.

[GroupID] :1~3 switch(config)#aggregator group

1 2-4 nolacp

or

[Port-list]:Member port switch(config)#aggreator group 1 list, This parameter

3,1,2 nolacp

could be a port range(ex.1-4) or a port list separate by a comma(ex.2, 3, 6)

127

show aggregator

[Group-number]

P

Show the information of trunk group switch#show aggregator 1

no aggregator lacp

[GroupID]

G

Disable the LACP function of trunk group switch(config)#no aggreator lacp

1 no aggregator group

[GroupID]

G

Remove a trunk group switch(config)#no aggreator

group 2

128