SuprtoolFullCount Variable. Robelle Suprtool 5.7

FATAL

SYSTEM

32768

49152

Add the value of the word to the number that appears with it for the true value of

SuprtoolOutCount. For example,

:showjcw suprtooloutcount

SUPRTOOLOUTCOUNT = WARN8616

16384 + 8616 = 25000

The MPE/iX :Showvar command can also be used to see the value of a JCW.

Showvar displays the full, correct number (e.g., 25,000) up to the maximum of

65,535.

Suprtool also sets two other JCWs: SuprtoolOutCount1 and SuprtoolOutCount2.

These communicate the full OUT= value to the Suprtool2 interface.

SuprtoolFullCount Variable

On MPE/iX, when Suprtool closes the output file, it also sets a variable named

SuprtoolFullCount with the number of output records. This is the same number reported in the total line (i.e., OUT=). The advantage of the variable is that if more than 65,535 records are written to the output file, the value of the SuprtoolFullCount variable is not truncated.

Summary of Parm= Values

Value

4

8

16

32

64

Meaning

execute Info string once execute Info string on each re-activation duplicate Input file to Output file don't suspend, terminate completely check with user before Exiting

Values may be combined by adding them together. For example, Parm = 96 means

"check with me before exiting, then when I do actually exit, terminate Suprtool completely instead of suspending".

54 • Suprtool 5.7 for MPE

Running Suprtool under MPE