Search Device
Options PRINTER
Options PHONE
Remote line Number
Search Device
Select the required option with
and confirm with
; spirolab III begins to search for
Bluetooth active devices; when one or more active devices are found then a list is shown, select a device and push to define the device (with vertical scroll) as a printer or as a phone (use PRINTER or PHONE); select one of the two options and push , otherwise push to ret urn to the Bluetooth options. If the device is already present in the chosen list a warning message will be shown on the display; push a key to turn to the devices list.
Options PRINTER
To control the devices memorized within the “printers list”. Enter the list with selected a device it is possible: and having
to set the device as default, identified with a yellow point near the device name (so spirolab
III will automatically connect to this)
to delete the device from the list (spirolab III asks for a confirmation by pressing
, otherwise press the list).
to return to the Bluetooth options and not delete the device from
If no devices are shown then a message advises the user to search for active devices; press to start the search or to return to the Bluetooth settings.
Options PHONE
To control the devices memorized in the “printers list”. Enter the list with selected a device it is possible: and having
to set the device as default, identified with a yellow point near the device name (and
spirolab III will automatically connect to this)
to delete the device from the list (spirolab III asks for a confirmation by pressing
, otherwise press the list).
to return to the Bluetooth options and not delete the device from
Even if the list is empty, a search can be made for active devices as previously described.
Remote line Number
spirolab III – User Manual Code MIR 980067
REV 1.6
Page 37 / 77
