advertisement
Section 3 - Getting Started
Getting Started
There are three different ways you can configure your router to connect to the Internet and connect to your clients:
• D-Link One Touch App - Use your Android device, iPhone, iPad, or iPod touch to configure your modem router.
Refer to One-Touch App Setup on page 13.
• Web-based Setup Wizard - This wizard will launch when you log into the modem router for the first time.
Refer to Web-based Configuration Utility on page 14.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 12
Section 3 - Getting Started
One-Touch App Setup
Step 1 - Scan the code below or search “D-Link One-Touch” (App Store or
Google Play) to download the D-Link One-Touch app to your iPhone, iPad, or Android device.
iOS
Step 2 - Once your app is installed, you may now configure your modem
router. Connect to the modem router wirelessly by going to your wireless utility on your device. The default Wi-Fi Network is dlink-
2790U-z. Connect and then continue to step 3.
Note: By default, the DSL-2790U has wireless security enabled. The
default password can be found on a label on the under side of the device.
Step 3 - Once connected via wireless, click on the D-Link One-Touch icon
from your mobile device, then click Start to continue. Please follow the on-screen instructions to complete the setup.
Step 4 - Once the Setup Complete screen appears, click Finish. You will then
be asked if you wish to save the Profile card with all of the details that you have just configured, it is recommended to select YES for future reference.
Congratulations! You have completed the modem router installation.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual
Android One-Touch App
13
Section 3 - Getting Started
Web-based Configuration Utility
This section will show you how to configure your D-Link wireless router using the web-based configuration utility.
If you wish to change the default settings or adjust the configuration of the
DSL-2790U you may use the web-based configuration utility.
To access the configuration utility, open a web browser such as Internet Explorer and enter http://192.168.1.1 in the address field.
Select admin from the drop-down menu and then enter your password. The default password is admin.
On your first login you will be directed to the Setup Wizard page.
If you want to configure the router manually without running the wizard, skip
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 14
Section 3 - Getting Started
Wizard
Use the Setup Wizard to quickly and easily configure the DSL-2790U. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet.
Click the Setup Wizard button to continue.
If you want to configure the router manually without running the wizard, skip
SETUP WIZARD
The Setup Wizard will guide you through the following steps:
Step 1: Change Device Login Password
Step 2: Set Time and Date
Step 3: Setup Internet Connection
Step 4: Configure Wireless Network
Step 5: Completed and Restart
Click Next to begin.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 15
Section 3 - Getting Started
Step 1: Change Device Login Password
This step of the wizard allows you to configure your password settings.
Enter a new Password and Verify Password to secure your modem router.
Click Next to continue. Otherwise, click Skip to leave the password unchanged.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 16
Section 3 - Getting Started
Step 2: Set Time and Date
This step of the wizard allows you to configure your Time and Date settings.
Check Automatically synchronize with Internet time servers to enable time and date setup, and select your Time Zone from the drop-down menu.
Daylight saving time will be automatically configured for your time zone.
Check Enable Daylight Saving only if you want to override the default settings for your time zone.
If necessary, change the Network Time Protocol (NTP) servers.
Click Next to continue.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 17
Section 3 - Getting Started
Step 3: Setup Internet Connection
This step of the wizard allows you to configure your Internet connection type.
If you have an DSL connection, select DSL. If you have a cable or NBN Fiber connection and are connecting via the WAN port, select ETH WAN.
If you selected DSL, choose your Country and Internet Service Provider (ISP) from the drop down menu. The necessary settings will automatically populate.
If you cannot find your country or ISP, select Others. You will need to enter the data provided by your ISP manually. Select the Internet Protocol used by your ISP: Dynamic IP, Static IP, PPPoE, PPPoA, or Bridged. Also select the
Connection Type, and input the VPI and VCI settings.
If you selected ETH WAN, select and configure the Internet Protocol used by your ISP: Dynamic IP, Static IP, PPPoE, or Bridged.
If you selected Dynamic IP or Bridged, click Next to continue.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 18
Section 3 - Getting Started
PPPOE/ PPPOA
If the router detected or you selected PPPoE or PPPoA, a box will appear to enter your PPPoE/PPPoA username and password. Once you have entered your PPPoE/PPPoA credentials, click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
STATIC IP
If you selected Static IP, enter your Static IP information as supplied by your
ISP. Click Next to continue.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 19
Section 3 - Getting Started
Step 4: Configure Wireless Network
This step of the wizard allows you to configure your Wireless network settings.
By default, wireless is enabled. If you want to disable the DSL-2790U’s wireless capability, uncheck Enable Your Wireless Network.
Under Wireless Network Name (SSID) you can change the SSID of your wireless network, for easier identification by wireless clients. If Visibility
Status is set to Visible, this name will show up when a client in range scans
for wireless networks. Otherwise, if your network is Invisible, clients will have to enter the SSID in order to connect.
Choose the best security level that is compatible with your wireless clients. WPA2-PSK is recommended. Unless you chose None (this is NOT recommended), you will need to enter a key below. Wireless clients requesting a connection with the network will need to enter this key in order to connect.
Click Next to continue.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 20
Section 3 - Getting Started
Step 5: Save and Completed
Congratulations! You have completed the setup of your modem router. You will see a summary of the settings you chose. It is recommended that you make a note of this information for future reference.
If you are satisfied with these settings, click Save/Apply to complete the setup wizard.
Otherwise, click Back to return to the previous step(s) or Cancel to exit the wizard without saving your changes.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual 21
advertisement
Key Features
- Tabletop router White
- Single-band (2.4 GHz) Wi-Fi 4 (802.11n) 300 Mbit/s
- Gigabit Ethernet
- Ethernet WAN DSL WAN
- Ethernet LAN (RJ-45) ports: 4
- USB port
- Quality of Service (QoS) support
Related manuals
advertisement
Table of contents
- 6 Product Overview
- 6 Package Contents
- 7 System Requirements
- 8 Introduction
- 9 Features
- 10 Hardware Overview
- 10 Front LED Panel
- 11 Back
- 12 Installation
- 12 Before you Begin
- 13 Wireless Installation Considerations
- 14 Manual Setup
- 17 Getting Started
- 18 One-Touch App Setup
- 19 Web-based Configuration Utility
- 20 Wizard
- 21 Step 1: Change Device Login Password
- 22 Step 2: Set Time and Date
- 23 Step 3: Setup Internet Connection
- 25 Step 4: Configure Wireless Network
- 26 Step 5: Save and Completed
- 27 Configuration
- 28 Setup
- 28 Wizard
- 29 Internet Setup
- 30 Add an Ethernet WAN Connection
- 35 Add a DSL WAN Connection
- 39 Wireless Connection
- 40 Wireless Connection Setup Wizard
- 41 Add Wireless Device with WPS
- 42 3G Network
- 44 Connecting a 3G/4G USB Dongle
- 45 Failover
- 46 Local Network
- 48 IPv6 Local Network
- 49 Time and Date
- 50 Logout
- 51 Advanced
- 52 Wireless Settings
- 53 Wireless Basics
- 54 Advanced Settings
- 57 MAC Filtering
- 58 Security Settings
- 59 Port Forwarding
- 61 Port Triggering
- 62 DMZ
- 63 Parental Control
- 63 Block Website
- 64 Block MAC Address
- 65 Filtering Options
- 66 Incoming IP Filtering
- 67 Outgoing IP Filtering
- 68 Bridge Filtering
- 69 Firewall Settings
- 70 DNS
- 71 Dynamic DNS
- 72 Storage Device Information
- 72 Storage Device Information
- 72 Storage User Account
- 73 Network Tools
- 74 Port Mapping
- 76 IGMP
- 77 Quality of Service
- 78 Queue Config
- 79 QOS Classification
- 81 UPNP
- 82 ADSL
- 83 SNMP
- 84 TR-069
- 85 Certificates
- 88 Routing
- 89 Static Route
- 90 Default Gateway
- 91 RIP
- 92 Schedules
- 93 Maintenance
- 94 System
- 95 Firmware Update
- 96 Access Controls
- 97 Account Password
- 98 Services
- 99 IP Address
- 100 Diagnostics
- 101 System Log
- 102 Status
- 103 Device Info
- 104 Wireless Clients
- 105 DHCP Clients
- 106 Logs
- 107 Statistics
- 108 Route Info
- 109 Help
- 110 Connect and Share a USB Device
- 110 Connect and Share a USB Storage Device
- 112 Connecting from a Windows Based PC
- 117 Connecting from a Mac
- 121 Connect a Wireless Client to your Router
- 121 WPS Button
- 122 Windows® 10
- 124 Windows® 8
- 124 WPA/WPA2
- 126 Windows® 7
- 126 WPA/WPA2
- 129 Windows Vista®
- 130 WPA/WPA2
- 132 Windows® XP
- 133 WPA/WPA2
- 135 Troubleshooting
- 139 Wireless Basics
- 140 What is Wireless?
- 142 Tips
- 143 Wireless Modes
- 144 Networking Basics
- 144 Check your IP address
- 145 Statically assign an IP address
- 146 Technical Specifications